9 Amps AC Contactor Features
Low cost AC magnetic contactor with 3 pole, 9A current, 24V, 110V, 220V AC coil voltage for your selection. It has small size, light weight, low power consumption, long life, safe and reliable features, can be as a bypass contactor for frequently starting and controlling AC motors.
9 Amps AC Contactor Specifications
| Model | ATO-CJX2-09 | |||
| Rated Operational Current (AC-3) | 380V | 9A | ||
| 660V | 7A | |||
| Conventional Heating Current | 20A | |||
| Rated Insulation Voltage | 690V | |||
| Power of Controllable 3-phase Squirrel-cage Motor (AC-3) | 220V | 2.2kW | ||
| 380V | 4kW | |||
| 660V | 5.5kW | |||
| Operational Frequency (AC-3) | Electric Life | 1200 times/h | ||
| Mechanical Life | 3600 times/h | |||
| Service Life | Electric Life (104 times) | 100 | ||
| Mechanical Life (104 times) | 1000 | |||
| Matching Fusing Model | RT16-16 | |||
| Average Power Consumption (20℃) @ 50Hz | Pick-up | 76VA | ||
| Holding | 9.4VA | |||
| Contact Form (Optional) | 3P+NO or 3P+NC | |||
| Rail Size | 35mm | |||
| Ambient Temperature | -5℃~+40℃ | |||
| Altittude | ≤2000m | |||
| Class of Pollution | Class 3 | |||
| Installation Category | Ⅲ | |||
| Weight | 0.33kg | |||
9 Amps AC Contactor Dimensions

Details

Tips: Contactor installation precautions
- When the contactor is installed, the bottom plate should be perpendicular to the bottom surface, and the inclination should be less than 5°.
- When the AC contactor is installed, the two sides should be placed in the upper and lower positions to facilitate heat dissipation.
- When installing the wiring, be careful not to lose the screws, coils, terminals, etc, and tighten the screws.
Product reviews
Worked for my need!
Dan
3/24/2022 9:59 PM
This AC contactor worked amazingly well. I’m using it to turn on and off my air compressor in my workshop! Surprisingly easy to install, more modern design, and it just does the job!
Was this review helpful? (0/0)
Only registered users can write reviews
Customers who bought this item also bought
Electromagnetic Relay, DPDT, 12/24/110/220V coils
ATO-EMR-HH52P
$52.99
Electromagnetic relay features with 8 pins, DPDT(Double Pole Double Throw), clear and plastic housing. The coil voltages of 12V DC, 24VDC, 110V AC and 220V AC are available with contact load 5A/240V AC 28V DC and widely used in automatic control system.