Compression Load Cell, 300kg/1000kg/25 ton/50 ton to 100 ton

$116.78
Compression load cell is special designed for weight measurement, with good anti-eccentric load performance, low height, all sealed, complete specifications, Load cell can be applied for platform scale, truck scale, rail weighbridge and material level measurement and control in warehouse.
SKU: ATO-LC-P01
*
Free Shipping
Delivery date: 6-12 days

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0~5V, 0~10V, 0~±10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

The compression load cell is a device used to measure pressure changes. Its working principle is based on the Piezoresistive Effect. When pressure is applied, the piezoresistive material physically deforms. This deformation causes the material's resistivity to change, producing a voltage signal. By measuring changes in this voltage signal, information about pressure changes can be obtained. Compression load cells have capacity range from 300kg, 500kg, 1000kg, 10 ton, 25 ton, 50 ton to 100 ton. Load cell capacity can be customized according to customer requirements.

Specification

ModelATO-LCST-TJH-4A
Shipping Weight1.5~31kg
Capacity Range *300 kg~100 ton
Matched Display ControllerATO-TY5DA3 (Click it to the controller page)
Matched TransmitterATO-LCTR-NTB3K (Click it to the transmitter page)
Accuracy0.03%F.S (linearity + hysteresis + repeatability)
Sensitivity2.0±0.1mV/V
Creep±0.03%F.S/30min
Zero Output±1%F.S
Temperature Effect on Zero±0.03%F.S/10℃
Temperature Effect on Output±0.03%F.S/10℃
Operating Temperature-20℃~+65℃
Input Impedance380±10Ω or 750±15Ω
Output Impedance350±3Ω or 700±5Ω
Insulation Resistance≥5000MΩ
Safety Overload150%F.S
Bridge Voltage (excitation voltage)DC 10V
MaterialAlloy steel or stainless steel
Protection ClassIP67
Cable Length3m (<5 ton), 6m (≥5 ton)
WiringEXC+: Red, EXC-: Black, SIG+: Green, SIG-: White


Feature

Compression load cell 300kg to 50 ton feature

  • 42CrMo Alloy Material: Features an external thread connection, offering exceptional resistance to mechanical fatigue, high load capacity, and a broad range of applications, ensuring both safety and reliability.
  • High Measurement Accuracy: Delivers stable output with consistent and reliable signal transmission, coupled with strong anti-jamming capabilities, ensuring precise and accurate measurements.
  • Fine Workmanship: Incorporates advanced grinding techniques with a smooth, flat design, allowing for effortless connection with dual-threaded ends and ensuring easy and efficient installation.

Dimension

CapacityDimension (mm)
L1L2ΦCΦDHESR
300~1000kg7462166.5413352
2~7ton9073208.553.54470
10~25 ton116963011827091
30~50 ton13210838139785120
100 ton2401907626125112200

Compression load cell 300kg to 50 ton dimension

Wiring Method

Load cell wiring method

Tips: Can Compression Load Cells be used in multi-load measurement systems?

Yes, compression load cells can be used in multi-load measurement systems where multiple load cells are combined to measure forces in different directions or parts of a system. In such systems, the data from multiple load cells are combined to provide an overall force measurement, often used in testing or monitoring systems in industries such as aerospace, automotive, and structural engineering. For instance, in large-scale testing setups, multiple compression load cells are used to measure different parts of a structure or machine under load, allowing for more comprehensive force measurement.

Causes and Solutions for Load Cell Drift

In this video, we discuss several common causes of load cell drift and share with you some possible solutions. After watching it, you may find it helpful to ensure the accuracy of your load cells and weighing systems.

Weighing Monitoring System

In this video, you are introduced to a weighing monitoring system using PLC, HMI and load cell.

In this video, we've shown you how to calibrate the weight transmitter Model 610 by ATO using a compression load cell so that you can make sure you get the most accurate readings possible in your measurement.

In this video, ATO offers a variety of load cells and weigh modules designed for your applications.

Product reviews
Can the compression load cell be sealed?
5
Pepper
Avatar
4/19/2021 8:19 PM
Are the compression load cell a sealed unit? I want to see if it will leak internal trapped air? Best will be if they are not air tight and are open to the air.
Was this review helpful? Yes No (0/0)
ATO Responded
No, the compression load cell is not sealed, it's open to the air. But the factory can make it sealed. If required (free option), please specify when ordering.
Solutions to problems with load cells
5
Douglas
Avatar
6/9/2021 10:03 PM
Our Application to weigh 6 point at a time and we need a controller with 6 channel to connect all 6 load cell in same controller to identify independence load cell weight and consolidated weight. Please provide a solution for the same.
Was this review helpful? Yes No (0/0)
ATO Responded
No controller can be connected to 6 sensors at the same time! But you can use junction box to measure the consolidated value.
500kg
5
Andrew
Avatar
6/2/2022 6:03 PM
what is the decimal capability of the 500kg load cell? 0.01? 0.05 ? I am after two decimal place accuracy  but still a high load ~500kg
Was this review helpful? Yes No (0/0)
ATO Responded
What you want to know is its measurement accuracy at 500kg? If it is, the result is 0.15kg.
Calibration requirement for compression load cell
5
mila
Avatar
2/3/2023 1:23 AM
Just placed an order for the ATO-LCST-TJH-4A (5 ton).
The sales representative that I spoke with had said there is field calibration that will be needed to be done that ATO’s technical team would assist on and would like to get a head start on what will be required for this.  So if you have any relevant documentation that I could get ahead of time I would much appreciate it.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we noticed you purchased a load cell. Usually load cells are used together with display instruments or transmitters and need to be calibrated before use.
How to add these options of load cell?
5
rabbie
Avatar
5/10/2023 3:06 AM
Wanting to purchase 4 of these at 5 tun that are sealed with output impedance of 350±3Ω. How to add these options?
Was this review helpful? Yes No (0/0)
ATO Responded
SKU: ATO-LC-P01 Capacity 5 tons.
This load cell can be made with an output impedance of 353Ω, and the price remains the same.
There are currently 5 units in stock. The lead time will be approx 5-7 days.
We are looking at purchasing one of your compression load cells.
5
Harry
Avatar
2/6/2024 8:23 PM
We will be using it to collect data from a test static rocket engine test fire. We are expecting a thrust curve of 1000 to 3000 lbs. Will your 2 ton load cell be sensitive enough to detect these loads? Also the part is labeled as a 2 ton load cell. Is this metric or customary?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, this load cell can be used to collect data from a test static rocket engine test fire.

Note: The force-bearing point from the sensor is the raised area in the center. The measurement unit is metric ton=1000Kg.

Can you tell us what the ambient operating temperature is at which the ignition engine tests thrust?
Power supply
5
Andrew
Avatar
2/7/2024 11:33 AM
We will be using four (4) load cells ATO-LC-P01 (0-5 ton), connected to junction box ATO-LCBOX-10I, and then output to display controller ATO-DPM-LC5D. Please specify the power supply for this arrangement.
Was this review helpful? Yes No (0/0)
ATO Responded
The ATO-DPM-LC5D can output excitation power for use with the ATO-LCBOX-10I and load cell. The ATO-DPM-LC5D is powered by 100-240VAC, 50/60Hz.
Quality Load Cell, Help with Instructions
5
Van
Avatar
8/5/2024 12:40 PM
Hi, I have a NTJH-4A 100t compression load cell and ATO-DDC5-CHB 5 digit display from ATO.

When I connect the load cell to the display as shown in the ATO video on youtube. The display reads -100.00. Adding weight positively increase the number. When I try to zero (calibrate the display) there is error 1. What does this mean? How can it be fixed?
Was this review helpful? Yes No (0/0)
ATO Responded
1. If the display shows -100.00, you can swap the green/white signal lines, apply appropriate pressure, and check whether the sensor has a normal display.
2. Regarding error 1, the maximum automatic calibration range can only be 10000. If the input value exceeds 10000, error 1 will appear because this is a 5-digit display controller. For a 100-ton range, the display unit Uint should be set to T.
Measurement accuracy
4
Neshov
Avatar
8/3/2025 8:50 PM
Hello, I'm looking to purchase some load cells with junction box amplifiers for weighing product tanks at our production facility. I need information on the accuracy I can achieve and the minimum measurement accuracy I can achieve using the following configuration: four ATO-LC-P01 load cells placed on each tank leg, equipped with an ATO-LCTR-OAR amplifier and an ATO-LCBOX-10I junction box.
Was this review helpful? Yes No (0/0)
ATO Responded
The load cell accuracy is 0.05%, and the minimum measurement value is no less than 10% of the range.
Sampling Rate
5
Dennison
Avatar
12/4/2025 11:31 PM
We are measuring a small SRM with a pressure of approximately 250 kg—I was originally hoping for a 500 kg range to obtain medium-range measurement results. Due to the dynamic output of the pressure sensor, we are sampling at a 2 kHz sampling rate (but we could use a load cell with a slower response time). Any suggestions?
Was this review helpful? Yes No (0/0)
ATO Responded
This compression load cell ATO-LC-P01 is IP67 by default, and the cable can be customized to be extended to 10 meters, but the sensor's response frequency is 300-500 Hz, which does not meet the required 2 kHz.
A question
5
Linde
Avatar
3/3/2026 8:18 PM
Hello, I have a question about the ATO-LCST-TJH-4A 300Kg compression load cell. Is it possible to set the excitation voltage to 5V and then use it with an amplifier/ADC like the HX711? This is my current electronics configuration. If it doesn't work, I will have to look for other load cells.
Was this review helpful? Yes No (0/0)
ATO Responded
The ATO-LCST-TJH-4A 300Kg compression load cell can be powered by a 5V excitation voltage. Theoretically, it should be able to be used with the HX711, but we haven't tested it.
Usage voltage
4
Kuolina
Avatar
10/22/2026 9:03 PM
We recently purchased a load cell, model ATO-LC-P01. Can I use 12V DC as the bridge voltage instead of 10V DC? Thank you.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, a 12V excitation voltage is acceptable. The maximum excitation voltage for the load cell cannot exceed 15V DC.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0~5V, 0~10V, 0~±10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

The compression load cell is a device used to measure pressure changes. Its working principle is based on the Piezoresistive Effect. When pressure is applied, the piezoresistive material physically deforms. This deformation causes the material's resistivity to change, producing a voltage signal. By measuring changes in this voltage signal, information about pressure changes can be obtained. Compression load cells have capacity range from 300kg, 500kg, 1000kg, 10 ton, 25 ton, 50 ton to 100 ton. Load cell capacity can be customized according to customer requirements.

Specification

ModelATO-LCST-TJH-4A
Shipping Weight1.5~31kg
Capacity Range *300 kg~100 ton
Matched Display ControllerATO-TY5DA3 (Click it to the controller page)
Matched TransmitterATO-LCTR-NTB3K (Click it to the transmitter page)
Accuracy0.03%F.S (linearity + hysteresis + repeatability)
Sensitivity2.0±0.1mV/V
Creep±0.03%F.S/30min
Zero Output±1%F.S
Temperature Effect on Zero±0.03%F.S/10℃
Temperature Effect on Output±0.03%F.S/10℃
Operating Temperature-20℃~+65℃
Input Impedance380±10Ω or 750±15Ω
Output Impedance350±3Ω or 700±5Ω
Insulation Resistance≥5000MΩ
Safety Overload150%F.S
Bridge Voltage (excitation voltage)DC 10V
MaterialAlloy steel or stainless steel
Protection ClassIP67
Cable Length3m (<5 ton), 6m (≥5 ton)
WiringEXC+: Red, EXC-: Black, SIG+: Green, SIG-: White


Feature

Compression load cell 300kg to 50 ton feature

  • 42CrMo Alloy Material: Features an external thread connection, offering exceptional resistance to mechanical fatigue, high load capacity, and a broad range of applications, ensuring both safety and reliability.
  • High Measurement Accuracy: Delivers stable output with consistent and reliable signal transmission, coupled with strong anti-jamming capabilities, ensuring precise and accurate measurements.
  • Fine Workmanship: Incorporates advanced grinding techniques with a smooth, flat design, allowing for effortless connection with dual-threaded ends and ensuring easy and efficient installation.

Dimension

CapacityDimension (mm)
L1L2ΦCΦDHESR
300~1000kg7462166.5413352
2~7ton9073208.553.54470
10~25 ton116963011827091
30~50 ton13210838139785120
100 ton2401907626125112200

Compression load cell 300kg to 50 ton dimension

Wiring Method

Load cell wiring method

Tips: Can Compression Load Cells be used in multi-load measurement systems?

Yes, compression load cells can be used in multi-load measurement systems where multiple load cells are combined to measure forces in different directions or parts of a system. In such systems, the data from multiple load cells are combined to provide an overall force measurement, often used in testing or monitoring systems in industries such as aerospace, automotive, and structural engineering. For instance, in large-scale testing setups, multiple compression load cells are used to measure different parts of a structure or machine under load, allowing for more comprehensive force measurement.

Product reviews
Can the compression load cell be sealed?
5
Pepper
Avatar
4/19/2021 8:19 PM
Are the compression load cell a sealed unit? I want to see if it will leak internal trapped air? Best will be if they are not air tight and are open to the air.
Was this review helpful? Yes No (0/0)
ATO Responded
No, the compression load cell is not sealed, it's open to the air. But the factory can make it sealed. If required (free option), please specify when ordering.
Solutions to problems with load cells
5
Douglas
Avatar
6/9/2021 10:03 PM
Our Application to weigh 6 point at a time and we need a controller with 6 channel to connect all 6 load cell in same controller to identify independence load cell weight and consolidated weight. Please provide a solution for the same.
Was this review helpful? Yes No (0/0)
ATO Responded
No controller can be connected to 6 sensors at the same time! But you can use junction box to measure the consolidated value.
500kg
5
Andrew
Avatar
6/2/2022 6:03 PM
what is the decimal capability of the 500kg load cell? 0.01? 0.05 ? I am after two decimal place accuracy  but still a high load ~500kg
Was this review helpful? Yes No (0/0)
ATO Responded
What you want to know is its measurement accuracy at 500kg? If it is, the result is 0.15kg.
Calibration requirement for compression load cell
5
mila
Avatar
2/3/2023 1:23 AM
Just placed an order for the ATO-LCST-TJH-4A (5 ton).
The sales representative that I spoke with had said there is field calibration that will be needed to be done that ATO’s technical team would assist on and would like to get a head start on what will be required for this.  So if you have any relevant documentation that I could get ahead of time I would much appreciate it.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we noticed you purchased a load cell. Usually load cells are used together with display instruments or transmitters and need to be calibrated before use.
How to add these options of load cell?
5
rabbie
Avatar
5/10/2023 3:06 AM
Wanting to purchase 4 of these at 5 tun that are sealed with output impedance of 350±3Ω. How to add these options?
Was this review helpful? Yes No (0/0)
ATO Responded
SKU: ATO-LC-P01 Capacity 5 tons.
This load cell can be made with an output impedance of 353Ω, and the price remains the same.
There are currently 5 units in stock. The lead time will be approx 5-7 days.
We are looking at purchasing one of your compression load cells.
5
Harry
Avatar
2/6/2024 8:23 PM
We will be using it to collect data from a test static rocket engine test fire. We are expecting a thrust curve of 1000 to 3000 lbs. Will your 2 ton load cell be sensitive enough to detect these loads? Also the part is labeled as a 2 ton load cell. Is this metric or customary?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, this load cell can be used to collect data from a test static rocket engine test fire.

Note: The force-bearing point from the sensor is the raised area in the center. The measurement unit is metric ton=1000Kg.

Can you tell us what the ambient operating temperature is at which the ignition engine tests thrust?
Power supply
5
Andrew
Avatar
2/7/2024 11:33 AM
We will be using four (4) load cells ATO-LC-P01 (0-5 ton), connected to junction box ATO-LCBOX-10I, and then output to display controller ATO-DPM-LC5D. Please specify the power supply for this arrangement.
Was this review helpful? Yes No (0/0)
ATO Responded
The ATO-DPM-LC5D can output excitation power for use with the ATO-LCBOX-10I and load cell. The ATO-DPM-LC5D is powered by 100-240VAC, 50/60Hz.
Quality Load Cell, Help with Instructions
5
Van
Avatar
8/5/2024 12:40 PM
Hi, I have a NTJH-4A 100t compression load cell and ATO-DDC5-CHB 5 digit display from ATO.

When I connect the load cell to the display as shown in the ATO video on youtube. The display reads -100.00. Adding weight positively increase the number. When I try to zero (calibrate the display) there is error 1. What does this mean? How can it be fixed?
Was this review helpful? Yes No (0/0)
ATO Responded
1. If the display shows -100.00, you can swap the green/white signal lines, apply appropriate pressure, and check whether the sensor has a normal display.
2. Regarding error 1, the maximum automatic calibration range can only be 10000. If the input value exceeds 10000, error 1 will appear because this is a 5-digit display controller. For a 100-ton range, the display unit Uint should be set to T.
Measurement accuracy
4
Neshov
Avatar
8/3/2025 8:50 PM
Hello, I'm looking to purchase some load cells with junction box amplifiers for weighing product tanks at our production facility. I need information on the accuracy I can achieve and the minimum measurement accuracy I can achieve using the following configuration: four ATO-LC-P01 load cells placed on each tank leg, equipped with an ATO-LCTR-OAR amplifier and an ATO-LCBOX-10I junction box.
Was this review helpful? Yes No (0/0)
ATO Responded
The load cell accuracy is 0.05%, and the minimum measurement value is no less than 10% of the range.
Sampling Rate
5
Dennison
Avatar
12/4/2025 11:31 PM
We are measuring a small SRM with a pressure of approximately 250 kg—I was originally hoping for a 500 kg range to obtain medium-range measurement results. Due to the dynamic output of the pressure sensor, we are sampling at a 2 kHz sampling rate (but we could use a load cell with a slower response time). Any suggestions?
Was this review helpful? Yes No (0/0)
ATO Responded
This compression load cell ATO-LC-P01 is IP67 by default, and the cable can be customized to be extended to 10 meters, but the sensor's response frequency is 300-500 Hz, which does not meet the required 2 kHz.
A question
5
Linde
Avatar
3/3/2026 8:18 PM
Hello, I have a question about the ATO-LCST-TJH-4A 300Kg compression load cell. Is it possible to set the excitation voltage to 5V and then use it with an amplifier/ADC like the HX711? This is my current electronics configuration. If it doesn't work, I will have to look for other load cells.
Was this review helpful? Yes No (0/0)
ATO Responded
The ATO-LCST-TJH-4A 300Kg compression load cell can be powered by a 5V excitation voltage. Theoretically, it should be able to be used with the HX711, but we haven't tested it.
Usage voltage
4
Kuolina
Avatar
10/22/2026 9:03 PM
We recently purchased a load cell, model ATO-LC-P01. Can I use 12V DC as the bridge voltage instead of 10V DC? Thank you.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, a 12V excitation voltage is acceptable. The maximum excitation voltage for the load cell cannot exceed 15V DC.
Only registered users can write reviews
Customers who bought this item also bought

5 Digit Display Controller for Load Cells

ATO-DPM-LC5D
$210.80
Digital panel meter can cooperate with load cells, force sensors and weighing sensors, two outputs for data comparison, digital panel meter can display gross, net, peak and valley value alternately.

Digital Load Cell Amplifier, Output 4-20mA/0-10V/RS485

ATO-LCTR-OAR
$109.85
High precision load cell amplifier has a 6 digit LED display, output signal 4-20mA/ 0-5V/ 0-10V/ RS485. There are 3 keys for parameter settings. Digital load cell amplifier can be calibrated on-line by its 3 keys. The setting parameters include zero, capacity, communication rate, division value, decimal digits, etc.

Load Cell Transmitter, Output 0-5V/0-10V/4-20mA

ATO-LCTR-OA
$81.27
Load cell transmitter is made of aluminum alloy, output standard signal 0-5V/0-10V/4-20mA, has linear compensation, humidity compensation, external zero debugging, external span debugging, input overload protection and output short circuit protection functions.

Load Cell Junction Box for Scales, 2/3/4/6/8/10 Inlets to 1 Outlet

ATO-LCBOX-10I
$66.67
Multi-channel load cell junction box has 2/3/4/6/8/10 inlets and 1 outlet, aluminum alloy casing, good anti-interference, special for waterproof sealing joint, waterproof and dustproof rubber gasket for cover, easy to assemble and debug. Each channel can be adjusted balance to prevent damage to the sensor caused by inductive lightning and surge signals.

1.5hp (1.2kW) Pneumatic Vane Air Motor

ATO-PVAM-HX4AM
$464.45
1200 watt pneumatic vane air motor with maximum torque rotated speed 300rpm, three kinds of installation methods can be chosen, gray color. It is widely used in rock drilling of mine, drilling, ship, metallurgy, chemical engineering, and papermaking etc.