24V-60V Brushless DC Motor Controller for 36/48V BLDC Motor

$283.36
Low price brushless DC motor controller works at 24V to 60V power supply to control speed for 36V/ 48V BLDC motor. This motor driver is equipped with a variety of communication interfaces, and can realize different mode control, PWM open loop and speed closed loop.
SKU: ATO-BLDC-C50
*
Free Shipping
Delivery date: 6-12 days

BLDC motor driver is equipped with the basic control interface and the upper computer can realize the main functions of the whole system. The hall sensor motor can be controlled by square wave or positive wave algorithm.

Specification

ModelATO-BD50 (Click it to view more controller specs)
Rated Current50A
Rated Input Voltage RangeDC +24~ +72V
Operating Temperature Range-40-+80℃
IO InputSupports NPN, PNP
NPN: 0V is low, 5~24V is high, current 20mA
PNP: 13V high output, low to ground
IO OutputOpen Drain NPN Output Voltage: not exceed 30V, Current: 500mA
SV Input CharacteristicsDC 0-5V Range or DC 0-10V Range
Deadband Voltage Adjustment Range: 0.2~1.0V
Input Internal Resistance:100k
PWM Input CharacteristicsFrequency Range: 1~10kHz (50% duty cycle)
Duty Cycle Range:0~100%(100Hz-1000Hz)
Signal Voltage: DC 5~24V
Carrier Frequency10~20kHz
485 Communication ParametersID: 1~255
Baud Rate: 9600/19200/38400/57600/115200 bps
CAN Communication ParametersID: 0~255
Baud Rate: 125/250/500 kbps
Load150% of Rated Current
Overload Duration: 30~1s (at 150% Rated)
External Temperature SensorCustomizable
ntc=mf52-103f-3435-55l
Control MethodTorque Loop (Open Loop) Speed Loop (Close Loop)
Acceleration and Deceleration Times0.5-16s Motor Without Load
Overheating ProtectionInside the Driver:+85℃
Note*
  1. RS485 (Modbus RTU) and CAN Bus cannot be used at the same time.
  2. VRM and PWM cannot be used at the same time.


Dimensions (Unit: mm)

Dimension of Brushless DC Motor Driver 24V 60V

Note:

  • Please install, connect, and debug the motor controller with industry technicians.
  • It is not allowed to install, remove,e or replace the circuit of the motor controller when it is live.
  • Be sure to install necessary protective devices between the power input and the power supply (battery) to avoid dangerous accidents or fatal injuries.
  • Need to install: overcurrent protector, insurance, emergency switch.
  • Please do the isolation and insulation protection between the motor controller and the ground and equipment.
  • If there is a real need for live debugging of this motor controller, please choose a non-metallic well-insulated screwdriver or special debugging tool.
  • This motor controller shall be installed in a well-ventilated environment.
  • This motor controller cannot be directly used in high humidity, dust, corrosive gas, or strong vibration of the abnormal environment.

Details

24V-60V Brushless DC Motor Controller Details

Tips: What is a brushless DC motor controller?

The brushless DC motor controller is composed of the motor's main body and the driver. It is a typical mechatronic product. The BLDC motor drivers have the advantages of good adjustment and starting performance of the DC motor and the simple structure of the asynchronous motor without maintenance. The highly reliable motor speed regulation field has been widely used.

The motor controller is the command center for the normal operation of the brushless DC motor and the realization of various speed-regulating servo functions. It mainly completes the following functions: logically synthesize various signals to provide various control signals to the drive circuit; generate PWM modulation signals, realize the speed regulation of the motor, adjust the speed of the motor to the current loop, so that the system has better dynamic static performance, and realize the fault protection functions such as short circuit, over current, under voltage, and locked rotor.

BLDC Motor Controller Circuit: 'IO + SV' Control

This video walks you through setting up a BLDC motor controller using the "Input/Output & Speed Voltage" method, covering control basics, required components, wiring, and operation.

Product reviews
Worked as described
5
Michael
Avatar
3/22/2022 3:23 AM
This  controller worked as described. We install it according to the instruction,  and connect it properly, It works well on three phase motor. So far so good! I'll update if there is anything wrong.
Was this review helpful? Yes No (0/0)
Works well.
5
Della
Avatar
5/18/2022 3:10 AM
Excellent brushless DC motor controller, extremely smooth and great speed control. Everything works as expected and without any issues. Will buy more of these for sure!
Was this review helpful? Yes No (0/0)
What is the capacitance of the capacitors in the MCU?
5
Miser
Avatar
5/25/2022 1:02 AM
A peer of mine helped us purchase an ATO TH-G Series motor controller. We are currently designing a precharge circuit for the MCU and are wondering what the capacitance of the capacitors in the MCU is.
Was this review helpful? Yes No (0/0)
ATO Responded
What's the specific model of the controller?
can i drive sensor-less Motor using this Driver?
5
Vikram
Avatar
6/14/2022 5:27 AM
can i drive sensor-less Motor using this Driver?
Was this review helpful? Yes No (0/0)
ATO Responded
No, you can't.
Worth
5
Jake
Avatar
9/14/2025 9:21 PM
This brushless motor controller delivers stable performance, wide voltage range, precise speed control, versatile interfaces, and easy debugging. It operates with minimal heat generation and comprehensive protection features, offering excellent value for money.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

BLDC motor driver is equipped with the basic control interface and the upper computer can realize the main functions of the whole system. The hall sensor motor can be controlled by square wave or positive wave algorithm.

Specification

ModelATO-BD50 (Click it to view more controller specs)
Rated Current50A
Rated Input Voltage RangeDC +24~ +72V
Operating Temperature Range-40-+80℃
IO InputSupports NPN, PNP
NPN: 0V is low, 5~24V is high, current 20mA
PNP: 13V high output, low to ground
IO OutputOpen Drain NPN Output Voltage: not exceed 30V, Current: 500mA
SV Input CharacteristicsDC 0-5V Range or DC 0-10V Range
Deadband Voltage Adjustment Range: 0.2~1.0V
Input Internal Resistance:100k
PWM Input CharacteristicsFrequency Range: 1~10kHz (50% duty cycle)
Duty Cycle Range:0~100%(100Hz-1000Hz)
Signal Voltage: DC 5~24V
Carrier Frequency10~20kHz
485 Communication ParametersID: 1~255
Baud Rate: 9600/19200/38400/57600/115200 bps
CAN Communication ParametersID: 0~255
Baud Rate: 125/250/500 kbps
Load150% of Rated Current
Overload Duration: 30~1s (at 150% Rated)
External Temperature SensorCustomizable
ntc=mf52-103f-3435-55l
Control MethodTorque Loop (Open Loop) Speed Loop (Close Loop)
Acceleration and Deceleration Times0.5-16s Motor Without Load
Overheating ProtectionInside the Driver:+85℃
Note*
  1. RS485 (Modbus RTU) and CAN Bus cannot be used at the same time.
  2. VRM and PWM cannot be used at the same time.


Dimensions (Unit: mm)

Dimension of Brushless DC Motor Driver 24V 60V

Note:

  • Please install, connect, and debug the motor controller with industry technicians.
  • It is not allowed to install, remove,e or replace the circuit of the motor controller when it is live.
  • Be sure to install necessary protective devices between the power input and the power supply (battery) to avoid dangerous accidents or fatal injuries.
  • Need to install: overcurrent protector, insurance, emergency switch.
  • Please do the isolation and insulation protection between the motor controller and the ground and equipment.
  • If there is a real need for live debugging of this motor controller, please choose a non-metallic well-insulated screwdriver or special debugging tool.
  • This motor controller shall be installed in a well-ventilated environment.
  • This motor controller cannot be directly used in high humidity, dust, corrosive gas, or strong vibration of the abnormal environment.

Details

24V-60V Brushless DC Motor Controller Details

Tips: What is a brushless DC motor controller?

The brushless DC motor controller is composed of the motor's main body and the driver. It is a typical mechatronic product. The BLDC motor drivers have the advantages of good adjustment and starting performance of the DC motor and the simple structure of the asynchronous motor without maintenance. The highly reliable motor speed regulation field has been widely used.

The motor controller is the command center for the normal operation of the brushless DC motor and the realization of various speed-regulating servo functions. It mainly completes the following functions: logically synthesize various signals to provide various control signals to the drive circuit; generate PWM modulation signals, realize the speed regulation of the motor, adjust the speed of the motor to the current loop, so that the system has better dynamic static performance, and realize the fault protection functions such as short circuit, over current, under voltage, and locked rotor.

Product reviews
Worked as described
5
Michael
Avatar
3/22/2022 3:23 AM
This  controller worked as described. We install it according to the instruction,  and connect it properly, It works well on three phase motor. So far so good! I'll update if there is anything wrong.
Was this review helpful? Yes No (0/0)
Works well.
5
Della
Avatar
5/18/2022 3:10 AM
Excellent brushless DC motor controller, extremely smooth and great speed control. Everything works as expected and without any issues. Will buy more of these for sure!
Was this review helpful? Yes No (0/0)
What is the capacitance of the capacitors in the MCU?
5
Miser
Avatar
5/25/2022 1:02 AM
A peer of mine helped us purchase an ATO TH-G Series motor controller. We are currently designing a precharge circuit for the MCU and are wondering what the capacitance of the capacitors in the MCU is.
Was this review helpful? Yes No (0/0)
ATO Responded
What's the specific model of the controller?
can i drive sensor-less Motor using this Driver?
5
Vikram
Avatar
6/14/2022 5:27 AM
can i drive sensor-less Motor using this Driver?
Was this review helpful? Yes No (0/0)
ATO Responded
No, you can't.
Worth
5
Jake
Avatar
9/14/2025 9:21 PM
This brushless motor controller delivers stable performance, wide voltage range, precise speed control, versatile interfaces, and easy debugging. It operates with minimal heat generation and comprehensive protection features, offering excellent value for money.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

500W Brushless DC Motor, 24V/48V, 2.4 Nm

ATO-BLDC-500R2
$376.35
3 phase 500W BLDC motor combines with BLDC motor controller working at 24V/ 48V to provide high torque, with competitive price. Electric DC motor features 2000 rpm rated speed and 2.4 Nm holding torque, brushless design for long life.

24V-60V Brushless DC Motor Controller for 24/36/48/60V BLDC Motor

ATO-BLDC-C100
$473.06
Low cost BLDC motor controller works at 24V to 60V power supply to control speed for 24/36/48/60V 3 phase BLDC motor. Rated current 75A, 50 rpm in hall sensor motor and 1 rpm in encoder sensor. This brushless electric motor driver should be installed in a well-ventilated environment.

1/4 hp (200W) Brushless DC Motor, 24V/48V, 0.64 Nm

ATO-BLDC-200R3
$245.39
Cheap price 24 volt, 48 volt brushless DC motor for sale, 200 watt 3 phase BLDC electric motor and matching controller/ gearbox, 0.64 Nm holding torque, peak torque to 1.91 Nm, 3000 rpm low speed, IP54 duty continues. 1/4hp BLDC motor kit suitable for electric car application.

450 W DC Worm Gear Motor, 12V/24V/48V

ATO-GEAR-W450
$709.66
Compact DC worm gear motor for sale, 450 W, works at 12V, 24V, 36V or 48V power supply, brushless design for electric car, and selectable gear ratio from 7.5:1 to 100:1. Different parameters can be customized.