50 W DC Worm Gear Motor, 12V/24V

$459.36
Low noise 50 W DC worm gear motor for electric car, renewable energy systems and industrial equipment, works with 2000 rpm high speed and 0.16N·m rated torque, selectable 12V, 24V or 36V power supply, gear ratio from 7.5:1 to 60:1.
SKU: ATO-GEAR-W50
*
*
Free Shipping
Delivery date: 6-25 days

50 W 3 phase BLDC motor is equipped with worm gearbox providing high torque and high efficiency at 12V, 24V or 36V power supply. Its power, voltage, speed, shaft, motor length and lead can be customized.

Specification

Motor ModelATOD2BLD50-12GNATOD2BLD50-24GNATOD2BLD50-36GN
Motor TypeBLDC Motor
Power50W
Voltage12V DC24V DC36V DC
Rated Current5.21A2.60A1.74A
No Load Current<0.8A<0.4A<0.3A
No Load Speed2800 rpm
Rated Speed2000 rpm
Rated Torque0.16N·m
Peak Torque0.48N·m
Motor Dimension57mm
Shaft Diameter11mm
ConstructionPermanent Magnet
Direction of RotationCW/CCW
CertificateCCC, CE, ROSH, LVD, EMC
Gear Ratio7.5, 10, 15, 20, 30, 40, 50, 60
Recommended Drive ModelATO-BLD750ATO-BLD300BATO-BLD120A
What Parameters of ATO Worm Gear Motors Can Be Customized?
PowerYes
VoltageYes
SpeedYes
ShaftYes
Motor LengthYes
Motor LeadYes

Allowable Torque with Gear Head

Gear Ratio7.510152030405060
Rated Output Speed (rpm)26720013310067504033
Rated Output Torque (Nm)1.41.92.93.75.36.77.89.3

Note:

  • This torque value is the rated output value of the reducer, not the final motor + output torque value T after reducer.
  • The formula for calculating the output torque after the final motor + reducer: T = rated torque of the motor * reduction ratio * 0.6, and T≤ rated allowable output torque value of the reducer.

Dimensions (Unit: mm)

Mounting screws are included with gearhead

Dimensions of 50W 12V/ 24V DC Worm Gear Motor

Speed-Torque Curve

50 W DC Worm Gear Motor Speed Torque Curve

  • Instantaneous maximum torque line
    The maximum torque momentarily impacts the load when the motor is started.
    Beyond this torque, the over-current protection of the driver will cause the motor to stop.
  • Short time operation area
    The motor can run at a short time within this torque range at different speeds.
    If the operation time is too long, the motor will generate heat, which may cause the motor to stop or burn.
  • Rated operating torque line
    The rated torque of motor running at different speeds, and the motor can run for a long time at this torque.
  • Continuous operating area
    When the motor rotates at different speeds, it runs continuously in this corresponding zone.

Details

100W DC Worm Gear Motor Details

Tips: Advantages of DC worm gear motor

  • DC worm gear motor has compact mechanical structure, light volume, small and efficient.
  • Good heat exchange performance, fast heat dissipation.
  • Simple installation, flexible and light, superior performance, easy maintenance.
  • Large driving speed ratio, large torque, high overload capacity.
  • Smooth operation, low noise, durable.
  • Strong applicability, safety and reliability.
  • Long service life, allowing input speed range is very low, deceleration range is large.
  • It is with self-locking function suitable for lifting operations.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
Is your gearmotor CE certified?
5
Ahmede
Avatar
12/27/2021 2:03 AM
Is your gearmotor CE certified?
Was this review helpful? Yes No (0/0)
ATO Responded
Only the motor is CE certified.
Strong worm gear motor
4
Angelinaa
Avatar
4/28/2024 3:28 AM
My wife often and I complain if too much laundry at once home washing machine will stop working, I discussed with my good brother decided to change a more powerful worm gear engine, the replacement process is more complicated, but after the installation of the trial, the power to be much stronger, fast speed, noise in the acceptable range, the stability of the surprisingly good, it is not very recommended for newcomers to replace their own, always, good value for money.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

50 W 3 phase BLDC motor is equipped with worm gearbox providing high torque and high efficiency at 12V, 24V or 36V power supply. Its power, voltage, speed, shaft, motor length and lead can be customized.

Specification

Motor ModelATOD2BLD50-12GNATOD2BLD50-24GNATOD2BLD50-36GN
Motor TypeBLDC Motor
Power50W
Voltage12V DC24V DC36V DC
Rated Current5.21A2.60A1.74A
No Load Current<0.8A<0.4A<0.3A
No Load Speed2800 rpm
Rated Speed2000 rpm
Rated Torque0.16N·m
Peak Torque0.48N·m
Motor Dimension57mm
Shaft Diameter11mm
ConstructionPermanent Magnet
Direction of RotationCW/CCW
CertificateCCC, CE, ROSH, LVD, EMC
Gear Ratio7.5, 10, 15, 20, 30, 40, 50, 60
Recommended Drive ModelATO-BLD750ATO-BLD300BATO-BLD120A
What Parameters of ATO Worm Gear Motors Can Be Customized?
PowerYes
VoltageYes
SpeedYes
ShaftYes
Motor LengthYes
Motor LeadYes

Allowable Torque with Gear Head

Gear Ratio7.510152030405060
Rated Output Speed (rpm)26720013310067504033
Rated Output Torque (Nm)1.41.92.93.75.36.77.89.3

Note:

  • This torque value is the rated output value of the reducer, not the final motor + output torque value T after reducer.
  • The formula for calculating the output torque after the final motor + reducer: T = rated torque of the motor * reduction ratio * 0.6, and T≤ rated allowable output torque value of the reducer.

Dimensions (Unit: mm)

Mounting screws are included with gearhead

Dimensions of 50W 12V/ 24V DC Worm Gear Motor

Speed-Torque Curve

50 W DC Worm Gear Motor Speed Torque Curve

  • Instantaneous maximum torque line
    The maximum torque momentarily impacts the load when the motor is started.
    Beyond this torque, the over-current protection of the driver will cause the motor to stop.
  • Short time operation area
    The motor can run at a short time within this torque range at different speeds.
    If the operation time is too long, the motor will generate heat, which may cause the motor to stop or burn.
  • Rated operating torque line
    The rated torque of motor running at different speeds, and the motor can run for a long time at this torque.
  • Continuous operating area
    When the motor rotates at different speeds, it runs continuously in this corresponding zone.

Details

100W DC Worm Gear Motor Details

Tips: Advantages of DC worm gear motor

  • DC worm gear motor has compact mechanical structure, light volume, small and efficient.
  • Good heat exchange performance, fast heat dissipation.
  • Simple installation, flexible and light, superior performance, easy maintenance.
  • Large driving speed ratio, large torque, high overload capacity.
  • Smooth operation, low noise, durable.
  • Strong applicability, safety and reliability.
  • Long service life, allowing input speed range is very low, deceleration range is large.
  • It is with self-locking function suitable for lifting operations.
Product reviews
Is your gearmotor CE certified?
5
Ahmede
Avatar
12/27/2021 2:03 AM
Is your gearmotor CE certified?
Was this review helpful? Yes No (0/0)
ATO Responded
Only the motor is CE certified.
Strong worm gear motor
4
Angelinaa
Avatar
4/28/2024 3:28 AM
My wife often and I complain if too much laundry at once home washing machine will stop working, I discussed with my good brother decided to change a more powerful worm gear engine, the replacement process is more complicated, but after the installation of the trial, the power to be much stronger, fast speed, noise in the acceptable range, the stability of the surprisingly good, it is not very recommended for newcomers to replace their own, always, good value for money.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews