Absolute Encoder, 10 bit, Single Turn, RS485/ CAN/ SSI

$123.81
Cheap rotary encoder for sales online. Single turn absolute encoder with 10 bit, RS485/ CAN/ SSI three communication interfaces for selection, working voltage 5V/ 24V are available, absolute rotary encoder with 50mA/ 100mA working current. The shaft encoder is widely used inmachine tools, food machinery, elevators and other special equipment.
SKU: ATO-RE-3910
*
*
Free Shipping
Delivery date: 6-12 days

High quality rotary encoder with shaft diameter 6mm/ 8mm, blind hole 8mm are optional. The shaft encoder with natural binary code encoded output. The absolute rotary encoder has advantages of small size, light weight and long service life.

Specification

ModelATO-RE-38R01024ATO-RE-38C01024ATO-RE-38S01024
Electrical parametersCommunication interfaceRS485CANSSI
ProtocolModbus rtuCAN 2.0SSI serial protocol
Working voltage5V-24V5V
Working current50 mA100 mA50 mA
Baud rate9600-115200 (default 9600)50k-1000k (default 500k)9600-115200 (default 9600)
Resolution10 bit (1024)
Encoded outputNatural binary code
Outer diameter/ shaft diameter39mm/ 50mm/ 39mm
Shaft diameter/ blind hole6mm/ 8mm/ 8mm
Working current50 mA
Linearity0.001
Kernel refresh cycle50 uS
Station number/ address1-127 (default 1)
Electrical life>100000h
Mechanical parametersMaximum mechanical speed1000 rpm2000 rpm
Shell/ flange materialZinc-nickel coated steel/ Aerospace aluminum
Shaft materialStainless steel
Bearing materialBearing steel
Maximum load of the shaftAxial 20N, radial 80N
Starting torque0.006 Nm
Environmental parametersOperating temperature-40-85℃
Storage temperature-40-85℃
Humidity98% (No condensation)
WaterproofShell: IP54/ IP67; Shaft, bearing: IP65/ IP67
Wiring methodsRedPositive power supply (5V, 9-24V)
BlackGround (GND)
YellowZRCS
GreenRS485BCANHCLK
WhiteRS485ACANLDO


Dimension (mm)

  • Shaft diameter 6mm, IP54

Dimension of rotary encoder shaft 6mm

  • Shaft diameter 8mm, IP54

Dimension of rotary encoder of shaft 8mm

  • Blind hole 8mm, IP54

Dimension of rotary encoder of blind hole 8mm

  • Shaft diameter 6mm, IP67

Dimension od rotary encoder of 6mm of IP67

  • Shaft 8mm, IP67

Dimension of Rotary Encoder of 8mm IP67

Wiring Attention

  1. When connecting the red wire, pay attention to the voltage value 5-24V on the encoder label.
  2. Zeroing wire (yellow wire) is grounded. The encoder position value will be zeroed when it is 100mS or more.
  3. Under normal circumstances, the yellow wire is suspended, but if there is a need to set the zero, then connect the zero wire.
  4. Be sure to avoid contacting the red wire with the zero wire (yellow wire), which may cause a short circuit and prevent communication.

Application

Rotary encoder application

Tips: What is Rotary Encoder?

This is a detector that can output angle data within one revolution of the motor to an external target. Absolute encoders are generally capable of outputting 360° with 8 to 12 bits. Incremental encoders have the disadvantage of losing axis position in the event of a power failure. However, with absolute encoders, the axis position is not lost even in the event of a power failure. Various codes such as binary code and BCD code can be output. Absolute encoders are more expensive, more precise and larger than incremental encoders.

In this video, ATO will show you top ten most used sensors (sensing technologies).

Product reviews
Great value of this absolute encoder!
5
Adam
Avatar
3/30/2022 12:05 AM
The encoders arrived tightly packed in a small plastic box, and all the parts and accessories ar protected well. Replaced a broken rotary encoder on a drum machine. Took a chance and it worked!
Was this review helpful? Yes No (0/0)
Cheap, bouncy rotary encoders
5
Gruver
Avatar
1/8/2023 7:04 PM
The 10 bits absolute encoders arrived packed well, all knobs are unscratched, and none of the encoder legs were bent. So far, they worked well and I will recommend to my friends.
Was this review helpful? Yes No (0/0)
Simple and convenient absolute encoder
5
Albus
Avatar
10/23/2023 3:18 AM
This absolute encoder performs well. I am completely satisfied with the 10-digit accuracy of the parameters. The single-turn design is stable and reliable, and the RS485 communication is simple and convenient.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

High quality rotary encoder with shaft diameter 6mm/ 8mm, blind hole 8mm are optional. The shaft encoder with natural binary code encoded output. The absolute rotary encoder has advantages of small size, light weight and long service life.

Specification

ModelATO-RE-38R01024ATO-RE-38C01024ATO-RE-38S01024
Electrical parametersCommunication interfaceRS485CANSSI
ProtocolModbus rtuCAN 2.0SSI serial protocol
Working voltage5V-24V5V
Working current50 mA100 mA50 mA
Baud rate9600-115200 (default 9600)50k-1000k (default 500k)9600-115200 (default 9600)
Resolution10 bit (1024)
Encoded outputNatural binary code
Outer diameter/ shaft diameter39mm/ 50mm/ 39mm
Shaft diameter/ blind hole6mm/ 8mm/ 8mm
Working current50 mA
Linearity0.001
Kernel refresh cycle50 uS
Station number/ address1-127 (default 1)
Electrical life>100000h
Mechanical parametersMaximum mechanical speed1000 rpm2000 rpm
Shell/ flange materialZinc-nickel coated steel/ Aerospace aluminum
Shaft materialStainless steel
Bearing materialBearing steel
Maximum load of the shaftAxial 20N, radial 80N
Starting torque0.006 Nm
Environmental parametersOperating temperature-40-85℃
Storage temperature-40-85℃
Humidity98% (No condensation)
WaterproofShell: IP54/ IP67; Shaft, bearing: IP65/ IP67
Wiring methodsRedPositive power supply (5V, 9-24V)
BlackGround (GND)
YellowZRCS
GreenRS485BCANHCLK
WhiteRS485ACANLDO


Dimension (mm)

  • Shaft diameter 6mm, IP54

Dimension of rotary encoder shaft 6mm

  • Shaft diameter 8mm, IP54

Dimension of rotary encoder of shaft 8mm

  • Blind hole 8mm, IP54

Dimension of rotary encoder of blind hole 8mm

  • Shaft diameter 6mm, IP67

Dimension od rotary encoder of 6mm of IP67

  • Shaft 8mm, IP67

Dimension of Rotary Encoder of 8mm IP67

Wiring Attention

  1. When connecting the red wire, pay attention to the voltage value 5-24V on the encoder label.
  2. Zeroing wire (yellow wire) is grounded. The encoder position value will be zeroed when it is 100mS or more.
  3. Under normal circumstances, the yellow wire is suspended, but if there is a need to set the zero, then connect the zero wire.
  4. Be sure to avoid contacting the red wire with the zero wire (yellow wire), which may cause a short circuit and prevent communication.

Application

Rotary encoder application

Tips: What is Rotary Encoder?

This is a detector that can output angle data within one revolution of the motor to an external target. Absolute encoders are generally capable of outputting 360° with 8 to 12 bits. Incremental encoders have the disadvantage of losing axis position in the event of a power failure. However, with absolute encoders, the axis position is not lost even in the event of a power failure. Various codes such as binary code and BCD code can be output. Absolute encoders are more expensive, more precise and larger than incremental encoders.

Product reviews
Great value of this absolute encoder!
5
Adam
Avatar
3/30/2022 12:05 AM
The encoders arrived tightly packed in a small plastic box, and all the parts and accessories ar protected well. Replaced a broken rotary encoder on a drum machine. Took a chance and it worked!
Was this review helpful? Yes No (0/0)
Cheap, bouncy rotary encoders
5
Gruver
Avatar
1/8/2023 7:04 PM
The 10 bits absolute encoders arrived packed well, all knobs are unscratched, and none of the encoder legs were bent. So far, they worked well and I will recommend to my friends.
Was this review helpful? Yes No (0/0)
Simple and convenient absolute encoder
5
Albus
Avatar
10/23/2023 3:18 AM
This absolute encoder performs well. I am completely satisfied with the 10-digit accuracy of the parameters. The single-turn design is stable and reliable, and the RS485 communication is simple and convenient.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

2 hp (1.5 kW) Brushless DC Motor, 36V/48V, 4.78 Nm

ATO-BLDC-1500R3
$432.36
Buy best 1500 watt brushless DC motor kit (3 phase BLDC motor and controller) at low price for your electric car. Motor features 3000 rpm rated speed, 4.78 Nm holding torque, peak torque up to 14.33 Nm, working at 36V / 48V DC power supply.

300W Brushless DC Motor, 24V/48V, 0.96 Nm

ATO-BLDC-300R3
$287.52
Fair price 300W BLDC motor kit ( brushless DC motor + controller + gearbox) best for electric car, three phase bldc electric motor provides 3000 rpm rated speed at 24V/ 48V, 0.96 Nm holding torque and peak torque to 2.87 Nm.

Small Through Hole Slip Ring, 12.7mm/20mm Inner Diameter

ATO-THSR-12720
$140.47
Small through hole slip rings are electrical slip rings with small apertures. Inner diameter 12.7mm has optional outer diameter of 35mm/56mm. Inner diameter 20mm has optional outer diameter of 42mm/56mm. It can stably transfer small currents or signals of 6~24 wires 5A or 6~24 wires 10A, support signal and power hybrid transmission.

400W 300KV 3-6S Waterproof Brushless DC Motor, IP28

ATO-BLDC-WP400
$122.77
Cheap waterproof brushless DC motor for sale. Maximum power 400W, rotation speed 300KV, input voltage 3-6S (DC 11-22V), waterproof grade IP28, shaft diameter 4.85mm, propeller mounting distance 25mm. Outrunner BLDC motor for direct drive propeller/Efoil electric surfboard, matching controller kit is optional.