2 hp (1.5 kW) Brushless DC Motor, 36V/48V, 4.78 Nm

$432.36
Buy best 1500 watt brushless DC motor kit (3 phase BLDC motor and controller) at low price for your electric car. Motor features 3000 rpm rated speed, 4.78 Nm holding torque, peak torque up to 14.33 Nm, working at 36V / 48V DC power supply.
SKU: ATO-BLDC-1500R3
*
*
*
Free Shipping
Delivery date: 6-25 days

2 hp (1500W) 3 phase brushless DC electric motor and controller for sale, 36 volt, 48 volt BLDC motor, protected with IP54, class F insulation, higher efficiency more than 85%. Adding brake option, matching planetary gearbox/ worm gearbox are available. In general, it would be more cost-effective to buy a complete set of our BLDC motors.

Basic Specifications

  • Model: ATO-D110BLD1500 (Click to see the motor specs)
  • Matched Controller Model: ATO-BD100(36V)/ ATO-BD50(48V) (Click to the controller page)
  • Rated Power: 1500W
  • Rated Voltage: 36V DC / 48V DC (Optional)
  • Rated Current: 52.08A at 36V, 39.06A at 48V
  • Phase: 3 phase
  • Holding Torque: 4.78 Nm
  • Peak Torque: 14.33 Nm
  • Rated Speed: 3000 rpm for standard (or 2000 rpm when matching the worm gearbox)
  • No-load Speed: 4200 rpm
  • Square Flange Size: 110 mm
  • Weight: 5.5 kg

Technical Parameters

  • Working Efficiency: 85%
  • Number of Poles: 4 pairs of poles (8 poles)
  • Brake Apparatus Voltage: 24V DC/ 48V DC, (Electromagnetic brake will trigger when the DC supply cuts off)
  • Brake Size: Φ76.8*27.7mm
  • Insulation Grade: F
  • Protection Grade: IP54 (IP65 can be customized, just contact us)
  • Working Temperature: 10℃~+40℃
  • Humidity: ≤90% (no condensation)
  • Motor Lead Length: 1 meter
  • Certificate: CE, RoHS, ISO/TS16949

Note: Power, Voltage, Speed, Shaft, Motor Length, and Motor Lead of ATO BLDC Motors can be customized.

Features

  1. High performance and low consumption
    1.5kW BLDC motor is a three phase electric motor, which especially suited for application requiring higher efficiency and power density.
  2. Wide application range and good control effect
    Brushless dc motor works with a matching controller (ATO-BD100) may achieve simple to complex control, turn from CW to CCW, and meet various communication requirements (RS232, RS485, CAN, etc.). BLDC controller can be controlled through 0-5VDC analog signal to adjust the speed.
  3. Wide control speed torque range
    Brushless dc motor works with a gearbox (choose a planetary gearbox with gear ratio from 4:1 to 200:1 or worm gearbox with gear ratio from 7.5:1 to 100:1) effectively reduce the motor's speed and moment of inertia to increase torque in your application, because the gearbox can control the start/stop and change speed in time.
  4. Low noise and smooth operation
    Brushless DC motor has no brushes, no sparks will be generated during operation, which greatly reduces friction.
  5. Good protection performance and continuous duty (24/7)
    1500W 48 volt BLDC motor kit adopts a new type of sealing device, which has good protection performance and strong adaptability to the environment, and works continuously in harsh environments such as corrosion and humidity.

Line Define

BLDC motor line define

Dimension (Unit: mm)

ATO 1.5kw BLDC motor dimension

Speed - Torque Curve

1.5kW bldc motor torque speed curve

  • Instantaneous maximum torque line
    The maximum torque momentarily impacts the load when the motor is started.
    Beyond this torque, the over-current protection of the driver will cause the motor to stop.
  • Short time operation area
    The motor can run at a short time within this torque range at different speeds.
    If the operation time is too long, the motor will generate heat, which may cause the motor to stop or burn.
  • Rated operating torque line
    The rated torque of motor running at different speeds, and the motor can run for a long time at this torque.
  • Continuous operating area
    When the motor rotates at different speeds, it runs continuously in this corresponding zone.

Characteristic Curve

1.5kW bldc motor characteristic curve

Details

1.5KW Brushless DC Motor Details

Tips: Brushless DC Motor Control Circuit

The commutation circuit of DC brushless motors includes two inseparable parts, which are the drive circuit and the control circuit, low-power circuits in particular tend to integrate the two into a single dedicated integrated circuit.

The drive circuit and the control circuit can each be integrated separately in high-power motors. The drive circuit outputs electrical power, drives the armature windings of the motor, and is controlled by the control circuit. At present, the driving circuit has been switched from the linear amplification state to the pulse width modulation switching state, and the corresponding circuit components are also transferred from the transistor discrete circuits to the modular integrated circuits. Modular integrated circuits have power bipolar transistors, power FETs and isolation gate field effect bipolar transistors and other components. Although, the barrier field effect bipolar transistor is more expensive, it is more appropriate to choose it from a reliable safety and performance point of view.

PDF:

ATO High Torque BLDC Motor Drawings & Price

Note:

  1. ATO highly recommends 48V motors because all models of 48V are in stock, the price is cheaper and the delivery time is shorter, only about 7 days.
  2. 24V/ 72V/ 96V motors are generally not in stock, need to be produced by the factory, which will cost more to start the production line and the delivery time will be longer, about 25 days.
  3. The prices in the table are just for your reference. If you want to get the latest quotation, please feel free to contact us.
ModelMotor PriceController PriceRated Power
(USD/Piece)(USD/Piece)(kW)
80mm Series DC Brushless Motor
ATO-80WDM01330 24/48/72/96V24V: 458.24395.520.41
48V: 305.49
72/96V: 580.43
ATO-80WDM02420 24/48/72/96V24V: 564.53395.520.5
48V: 376.35
72/96V: 715.06
ATO-80WDM02430 24/48/72/96V24V: 529.16395.520.75
48V: 352.77
72/96V: 670.26
ATO-80WDM03320 24/48/72/96V24V: 597.68395.520.69
48V: 398.45
72/96V: 757.36
ATO-80WDM03330 24/48/72/96V24V: 639.27395.521.04
48V: 426.18
72/96V: 809.74
110mm Series DC Brushless Motor
ATO-110WDM02020 24/48/72/96V24V: 687.38395.520.4
48V: 458.25
72/96V: 824.85
ATO-110WDM02030 24/48/72/96V24V: 745.11395.520.6
48V: 496.74
72/96V: 894.13
ATO-110WDM04010 24/48/72/96V24V: 779.86395.520.4
48V: 519.93
72/96V: 935.87
ATO-110WDM04020 24/48/72/96V24V: 788.57395.520.8
48V: 525.71
72/96V: 988.33
ATO-110WDM04030 24/48/72/96V24V: 798.63653.051.3
48V: 532.42
72/96V: 1001.95
ATO-110WDM06010 24/48/72/96V24V: 758.82395.520.6
48V: 505.88
72/96V: 956.69
ATO-110WDM06020 24/48/72/96V24V: 819.59653.051.3
48V: 546.39
72/96V: 1010.82
ATO-110WDM06030 24/48/72/96V24V: 995.94653.051.9
48V: 553.28
72/96V: 1051.23
130mm Series DC Brushless Motor
ATO-130WDM04010 24/48/72/96V24V: 876.95395.520.4
48V: 584.62
72/96V: 1099.08
ATO-130WDM04020 24/48/72/96V24V: 910.67395.520.8
48V: 607.13
72/96V: 1104.98
ATO-130WDM04030 24/48/72/96V24V: 959.18653.051.3
48V: 639.45
72/96V: 1151.01
ATO-130WDM06010 24/48/72/96V24V: 987.65395.520.6
48V: 658.43
72/96V: 1185.17
ATO-130WDM06020 24/48/72/96V24V: 1012.23653.051.3
48V: 674.82
72/96V: 1147.19
ATO-130WDM06030 24/48/72/96V24V: 1047.72653.051.9
48V: 698.48
72/96V: 1208.34
ATO-130WDM07710 24/48/72/96V24V: 1060.07395.520.8
48V: 706.71
72/96V: 1257.94
ATO-130WDM07720 24/48/72/96V24V: 1093.21653.051.6
48V: 738.65
72/96V: 1292.64
ATO-130WDM07730 48/72/96V48V: 751.52653.052.3
72/96V: 1337.71
ATO-130WDM10010 24/48/72/96V24V: 1161.55653.051
48V: 784.83
72/96V: 1396.89
ATO-130WDM10020 24/48/72/96V24V: 1224.36653.052
48V: 816.24
72/96V: 1371.28
ATO-130WDM10030 48/72/96V48V: 879.12898.213.1
72/96V: 1450.55
ATO-130WDM15010 24/48/72/96V24V:1311.88653.051.6
48V: 936.47
72/96V: 1498.35
ATO-130WDM15020 48/72/96V48V: 1086.36898.213.1
72/96V: 1738.17
ATO-130WDM15030 48/72/96V48V: 1127.541119.074.7
72/96V: 1804.64
180mm Series DC Brushless Motor
ATO-180WDM12010 48/72/96V48V: 1246.31653.051.3
72/96V: 1994.09
ATO-180WDM12020 48/72/96V48V: 1323.69653.052.5
72/96V: 2117.91
ATO-180WDM12030 48/72/96V48V: 1398.84898.213.8
72/96V: 2238.14
ATO-180WDM16010 48/72/96V48V: 1555.69653.051.7
72/96V: 2411.32
ATO-180WDM16020 48/72/96V48V: 1625.36898.213.4
72/96V: 2568.07
ATO-180WDM16030 48/72/96V48V: 1745.931119.075
72/96V: 2618.89
ATO-180WDM25010 48/72/96V48V: 2012.54653.052.6
72/96V: 3179.81
ATO-180WDM25020 48/72/96V48V: 2274.191119.075.2
72/96V: 3411.26
ATO-180WDM25030 48/72/96V48V: 2448.581531.997.9
72/96V: 3672.87
ATO-180WDM36010 48/72/96V48V: 2644.28898.213.8
72/96V: 3966.42
ATO-180WDM36020 48/72/96V48V: 2832.561119.077.5
72/96V: 4248.84
ATO-180WDM36030 72/96V72/96V: 4334.691885.1511.3
ATO-180WDM50010 48/72/96V48V: 3284.581119.075.2
72/96V: 4556.41
ATO-180WDM50020 48/72/96V48V: 4344.121531.9910.8
72/96V: 5994.72
ATO-180WDM50030 96V96V: 6204.652261.8415.7

ATO BLDC Motor Hall Sensor Controller Connection & Control

In this video, ATO shows you the connection and control operation of 200W (ATO-BLDC-200R3), 300W (ATO-BLDC-300R3), 1000W (ATO-BLDC-1000R3), 1500W (ATO-BLDC-1500R3) BLDC motor with controller. After the wiring is completed, we can use the speed control knob of the controller to adjust the speed.

How to Use Controller to Reverse and Stop the BLDC Motor

This video mainly shows you how to use BLDC motor controller connecting with an external potentiometer to adjust the speed of the motor, to naturally/urgently stop the motor, and forward or reverse control of the motor. In many cases, we can't directly control the speed by controller, so connecting with an external potentiometer is a good choice. Similarly, we can stop the motor or rotate the motor in the opposite direction without approaching the controller.

BLDC Motor Controller Control Speed with Analog Signal (5V)

The video shows how to use voltage analog signal to control the speed of ATO BLDC motor. Therefore, we can control the speed of BLDC motor in the same way with the 0~5V signal sent by PLC or microcontroller.

How to Control a BLDC motor using RS485
In this video we will show you how to control a BLDC motor through an RS485 interface and dedicated test software on a PC. Watching this practical exercise, and you will find that it is not difficult to control a motor in this way.

Using Potentiometer Control Circuit to Make BLDC Motor
Potentiometer is an adjustable electronic component, mainly used to control the voltage, resistance, current and other parameters in the circuit to adapt to different circuit requirements. It acts as a speed controller for BLDC motor, which provides a simple solution for controlling BLDC motor.

BLDC Motor Reverse Direction Experiment
To understand the control principle of BLDC motor and learn how to change the rotation direction of the motor by changing the control signal. This is a simple test that is very helpful in understanding and operating BLDC motors in real-world applications.

Product reviews
Good price and good performance 2 hp brushless DC motor
5
Jonathan
Avatar
7/6/2018 9:59 PM
Good price and good performance, I am very satisfied with this 1.5 kW BLDC motor. It has enough power for what I'm using it for.
Was this review helpful? Yes No (1/0)
Excellent BLDC motors for my projects
5
Mike Hatten
Avatar
10/31/2018 3:14 AM
Excellent BLDC motors for my projects. I ordered four of these 2hp 48V motors and out of all four worked perfectly. Item is as described and arrived well before it was promised.
Was this review helpful? Yes No (1/0)
Good and professional service
5
Noble
Avatar
1/4/2019 1:57 AM
I have already bought it from this website, but i don't know the controller for the ATO-M-BLDC-BLD1500-48A-30S how are 2 short green wires setup when a external potentiometer is used, i asking by email, the replying was quickly and solved my confusion directly. This is a very pleasant choice.
Was this review helpful? Yes No (2/0)
For this BLDC motor, can you provide electromagnetic brake on the shaft?
5
Colorado
Avatar
1/13/2019 7:38 PM
For this BLDC motor: 2 hp (1.5 kW) power capacity, can you provide electromagnetic brake on the shaft?
Was this review helpful? Yes No (1/0)
ATO Responded
Yes, we can install electromagnetic brake on the shaft on the output side of all ATO BLDC motors. After the brake is installed, the size and parameters of the motor are unchanged, but the shaft length will change somewhat.
A question for BLD-100A motor controller
5
Arunas
Avatar
6/11/2019 12:49 AM
On your BLD-100A controller how do I turn off the internal potentiometer?
Was this review helpful? Yes No (1/0)
ATO Responded
To turn off the internal potentiometer of the controller, please rotate end of the RV on the controller in counterclockwise direction.
Technical Specs
5
Ben
Avatar
7/4/2019 7:17 PM
Hello, I have two questions for this 2HP BLDC motor.

1. What is the specs of potentiometer that can be used with your 2HP BLDC motor?
2. Are your BLDC motor continuous duty? And what do they need for cooling anything?
Was this review helpful? Yes No (0/0)
ATO Responded
For Q1: When using the external potentiometer to adjust the speed, use the potentiometer with resistance value of 10KΩ.
For Q2: Yes, continuous duty (24/7). No external cooling is required (Environment Temperature should be: -20~55℃).
Can you provide 1.5kW BLDC motor with 18V DC voltage?
5
Julio Karwoski
Avatar
4/9/2020 2:57 AM
We are interested in your 2 hp (1.5 kW) 36V/48V 3000rpm brushless DC motor, can you provide the motor with 18V DC voltage?
Was this review helpful? Yes No (1/0)
ATO Responded
No, we have the motor with 36V DC or 48V DC only. If the voltage is 18V DC, the current will be high and we do not recommend/supply it.
My question is regarding the input power needs for a 1500W 48VDC motor.
5
Matias Moilanen
Avatar
4/23/2020 7:36 PM
I am interested in the reference product for an industrial control application. My question is regarding the input power needs for a 1500W 48VDC motor. Can you suggest any sources for a power supply of that size? The end user has 240VAC and 480VAC 1/3 phase power available.
Was this review helpful? Yes No (1/0)
ATO Responded
We can proivde customized transformer of 5kVA capacity with 1-phase, 240V AC and output will be DC 48V.
Something need to confirm before buying
5
Malik
Avatar
8/16/2020 7:34 PM
For your 2hp, 48VDC BLDC motor, can we feed its matched controller "BLD-100A" with 52VDC supply only?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, the voltage range of the BLD-100A controller is DC 24-72V, so you can use the power supply DC 52V, with no problem.
Want to buy a BLDC motor kit
5
Darcy
Avatar
1/25/2021 7:09 PM
I want to buy a BLDC motor kit, what will be the cost for sending a motor 2 hp (1.5 kW) 48V 3000rpm brushless DC motor and a controller ATOBLD-100 to an address in the Netherlands?
Was this review helpful? Yes No (0/0)
ATO Responded
It is free shipping to the Netherlands (by Air).
Related parameters of 2hp brushless DC motor kit
5
Tamara
Avatar
5/11/2021 9:58 PM
Is it possible to close the 2 hp BLDC motor end where the shaft is visible and have the motor meet an IP rating? What is maximum temperature level on the case of the motor?
Was this review helpful? Yes No (0/0)
ATO Responded
The maximum temperature of the motor casing is 85°C, and the end of the motor shaft will not affect IP protection level (IP54), so no need to close anything.
2 hp brushless DC motor kit related information
5
Karthik
Avatar
5/31/2021 8:46 PM
Do you have a rating for overhung load on the output shaft for the 40:1 and 50:1 planetary gear boxes for your 2hp BLDC motor?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, maximum radial force: 2840N, and maximum axial force: 2100N.
2 hp brushless DC motor kit sold items
5
Gardy
Avatar
6/15/2021 9:21 PM
I am interested in your 2 hp brushless DC motor. Do you sell speed controller and power supply for it?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we sell the controller but not the DC supply.
I am interested in your 2 hp brushless DC motor
5
Rsmith
Avatar
12/26/2021 8:15 PM
We are interested in your 2 hp (1.5 kW) 36V/48V 3000rpm brushless DC motor but with for an 18V DC voltage.
Was this review helpful? Yes No (0/0)
ATO Responded
No, 36VDC or 48VDC only. If the voltage is 18VDC, the current will be high and we do not recommend/supply it.
Questions about 2 hp BLDC
5
Evotrix
Avatar
12/28/2021 8:07 PM
What is the specs of potentiometer that can be used with our 2HP BLDC motor?
Was this review helpful? Yes No (0/0)
ATO Responded
When using the external potentiometer to adjust the speed, use the potentiometer with resistance value of 10KΩ.
Looking for a electric motor
5
Isaiah
Avatar
5/27/2022 12:46 AM
I'm looking for a electric motor, 2hp-3hp 36-48vdc, 4000rpm. Can you please provide me with more information on price if you have?
Was this review helpful? Yes No (0/0)
ATO Responded
We can customize a brushless motor with 2 hp 1.5 kW, 48vdc, 4000rpm. Prices are as shown on the website, free shipping, and the lead time will be approx 25 days.
Buying ATO D110BLD 1500
5
Ronnie
Avatar
2/13/2023 1:44 PM
The ATO BD1500 can I stop
Was this review helpful? Yes No (0/0)
Some question of DC motor
5
trond
Avatar
6/14/2023 12:01 AM
Thank you for getting back to us so promptly. I have attached a video of the error LED flashing and a picture of the wiring.
Do note that for wiring I did not attach the green/yellow wires that you can see in the photo when powering up.
One thing I did realize is that I have a 36V DC power supply but am not providing high current to the motor. Is there a specific power supply I should be using?
Additionally there is a 3-wire cable coming from the base of the motor that seems to be undocumented in the motor manual. What is the purpose of this?
Was this review helpful? Yes No (0/0)
ATO Responded
1. The motor needs a 36V 80A power supply.
2. Please refer to this video wiring: https://youtu.be/5EWF3KWIg2E
Is it possible to control DC motor with a torque command?
5
norbert
Avatar
8/29/2023 1:54 AM
I am currently working with a BD100 controller.
Is it possible to control my motor with a torque command?
I don't see enough information in the documentation, more details would be appreciated.
Was this review helpful? Yes No (0/0)
ATO Responded
May I ask what signal you want to use to control the motor?
If it is RS485, you can refer to this video: https://www.youtube.com/watch?v=gGVdhISJeC4
Does the DC motor controller have a built-in torque control mode?
5
khaled
Avatar
8/29/2023 2:43 AM
Thanks for the video, it helps a lot.
Yes, I will control the motor through RS485.
Does the controller have a built-in torque control mode?
Or do I have to implement it on my computer and then control the motor with a speed or PWM command?
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, this brushless motor controller does not have a built-in torque control mode.
The control mode you mentioned is only available in servo motors. But this controller BD100 supports PWM signal input.
Running at 60v
5
Noah
Avatar
10/31/2023 12:11 PM
Has this motor been tested running at 60V? Can this motor run at 60V?
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, none of the specifications on this page can be used in a 60V environment. 60V specification motors are customized specifications, please contact our sales for details.
Customization requirements
4
Berkner
Avatar
8/3/2026 3:04 AM
I am interested in purchasing a brushless DC motor with a rated power of 1.5kW or 1.0kW, a rated voltage of 60V, and a speed of up to 3000rpm. I noticed that the product description mentions that the voltage can be customized?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can customize a 2 hp (1.5 kW) Brushless DC Motor, 60V, 4.78 Nm, 3000rpm. Does this motor require a brake? The default motor cable length is 1 meter; is it necessary to extend the motor cable?
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

2 hp (1500W) 3 phase brushless DC electric motor and controller for sale, 36 volt, 48 volt BLDC motor, protected with IP54, class F insulation, higher efficiency more than 85%. Adding brake option, matching planetary gearbox/ worm gearbox are available. In general, it would be more cost-effective to buy a complete set of our BLDC motors.

Basic Specifications

  • Model: ATO-D110BLD1500 (Click to see the motor specs)
  • Matched Controller Model: ATO-BD100(36V)/ ATO-BD50(48V) (Click to the controller page)
  • Rated Power: 1500W
  • Rated Voltage: 36V DC / 48V DC (Optional)
  • Rated Current: 52.08A at 36V, 39.06A at 48V
  • Phase: 3 phase
  • Holding Torque: 4.78 Nm
  • Peak Torque: 14.33 Nm
  • Rated Speed: 3000 rpm for standard (or 2000 rpm when matching the worm gearbox)
  • No-load Speed: 4200 rpm
  • Square Flange Size: 110 mm
  • Weight: 5.5 kg

Technical Parameters

  • Working Efficiency: 85%
  • Number of Poles: 4 pairs of poles (8 poles)
  • Brake Apparatus Voltage: 24V DC/ 48V DC, (Electromagnetic brake will trigger when the DC supply cuts off)
  • Brake Size: Φ76.8*27.7mm
  • Insulation Grade: F
  • Protection Grade: IP54 (IP65 can be customized, just contact us)
  • Working Temperature: 10℃~+40℃
  • Humidity: ≤90% (no condensation)
  • Motor Lead Length: 1 meter
  • Certificate: CE, RoHS, ISO/TS16949

Note: Power, Voltage, Speed, Shaft, Motor Length, and Motor Lead of ATO BLDC Motors can be customized.

Features

  1. High performance and low consumption
    1.5kW BLDC motor is a three phase electric motor, which especially suited for application requiring higher efficiency and power density.
  2. Wide application range and good control effect
    Brushless dc motor works with a matching controller (ATO-BD100) may achieve simple to complex control, turn from CW to CCW, and meet various communication requirements (RS232, RS485, CAN, etc.). BLDC controller can be controlled through 0-5VDC analog signal to adjust the speed.
  3. Wide control speed torque range
    Brushless dc motor works with a gearbox (choose a planetary gearbox with gear ratio from 4:1 to 200:1 or worm gearbox with gear ratio from 7.5:1 to 100:1) effectively reduce the motor's speed and moment of inertia to increase torque in your application, because the gearbox can control the start/stop and change speed in time.
  4. Low noise and smooth operation
    Brushless DC motor has no brushes, no sparks will be generated during operation, which greatly reduces friction.
  5. Good protection performance and continuous duty (24/7)
    1500W 48 volt BLDC motor kit adopts a new type of sealing device, which has good protection performance and strong adaptability to the environment, and works continuously in harsh environments such as corrosion and humidity.

Line Define

BLDC motor line define

Dimension (Unit: mm)

ATO 1.5kw BLDC motor dimension

Speed - Torque Curve

1.5kW bldc motor torque speed curve

  • Instantaneous maximum torque line
    The maximum torque momentarily impacts the load when the motor is started.
    Beyond this torque, the over-current protection of the driver will cause the motor to stop.
  • Short time operation area
    The motor can run at a short time within this torque range at different speeds.
    If the operation time is too long, the motor will generate heat, which may cause the motor to stop or burn.
  • Rated operating torque line
    The rated torque of motor running at different speeds, and the motor can run for a long time at this torque.
  • Continuous operating area
    When the motor rotates at different speeds, it runs continuously in this corresponding zone.

Characteristic Curve

1.5kW bldc motor characteristic curve

Details

1.5KW Brushless DC Motor Details

Tips: Brushless DC Motor Control Circuit

The commutation circuit of DC brushless motors includes two inseparable parts, which are the drive circuit and the control circuit, low-power circuits in particular tend to integrate the two into a single dedicated integrated circuit.

The drive circuit and the control circuit can each be integrated separately in high-power motors. The drive circuit outputs electrical power, drives the armature windings of the motor, and is controlled by the control circuit. At present, the driving circuit has been switched from the linear amplification state to the pulse width modulation switching state, and the corresponding circuit components are also transferred from the transistor discrete circuits to the modular integrated circuits. Modular integrated circuits have power bipolar transistors, power FETs and isolation gate field effect bipolar transistors and other components. Although, the barrier field effect bipolar transistor is more expensive, it is more appropriate to choose it from a reliable safety and performance point of view.

Product reviews
Good price and good performance 2 hp brushless DC motor
5
Jonathan
Avatar
7/6/2018 9:59 PM
Good price and good performance, I am very satisfied with this 1.5 kW BLDC motor. It has enough power for what I'm using it for.
Was this review helpful? Yes No (1/0)
Excellent BLDC motors for my projects
5
Mike Hatten
Avatar
10/31/2018 3:14 AM
Excellent BLDC motors for my projects. I ordered four of these 2hp 48V motors and out of all four worked perfectly. Item is as described and arrived well before it was promised.
Was this review helpful? Yes No (1/0)
Good and professional service
5
Noble
Avatar
1/4/2019 1:57 AM
I have already bought it from this website, but i don't know the controller for the ATO-M-BLDC-BLD1500-48A-30S how are 2 short green wires setup when a external potentiometer is used, i asking by email, the replying was quickly and solved my confusion directly. This is a very pleasant choice.
Was this review helpful? Yes No (2/0)
For this BLDC motor, can you provide electromagnetic brake on the shaft?
5
Colorado
Avatar
1/13/2019 7:38 PM
For this BLDC motor: 2 hp (1.5 kW) power capacity, can you provide electromagnetic brake on the shaft?
Was this review helpful? Yes No (1/0)
ATO Responded
Yes, we can install electromagnetic brake on the shaft on the output side of all ATO BLDC motors. After the brake is installed, the size and parameters of the motor are unchanged, but the shaft length will change somewhat.
A question for BLD-100A motor controller
5
Arunas
Avatar
6/11/2019 12:49 AM
On your BLD-100A controller how do I turn off the internal potentiometer?
Was this review helpful? Yes No (1/0)
ATO Responded
To turn off the internal potentiometer of the controller, please rotate end of the RV on the controller in counterclockwise direction.
Technical Specs
5
Ben
Avatar
7/4/2019 7:17 PM
Hello, I have two questions for this 2HP BLDC motor.

1. What is the specs of potentiometer that can be used with your 2HP BLDC motor?
2. Are your BLDC motor continuous duty? And what do they need for cooling anything?
Was this review helpful? Yes No (0/0)
ATO Responded
For Q1: When using the external potentiometer to adjust the speed, use the potentiometer with resistance value of 10KΩ.
For Q2: Yes, continuous duty (24/7). No external cooling is required (Environment Temperature should be: -20~55℃).
Can you provide 1.5kW BLDC motor with 18V DC voltage?
5
Julio Karwoski
Avatar
4/9/2020 2:57 AM
We are interested in your 2 hp (1.5 kW) 36V/48V 3000rpm brushless DC motor, can you provide the motor with 18V DC voltage?
Was this review helpful? Yes No (1/0)
ATO Responded
No, we have the motor with 36V DC or 48V DC only. If the voltage is 18V DC, the current will be high and we do not recommend/supply it.
My question is regarding the input power needs for a 1500W 48VDC motor.
5
Matias Moilanen
Avatar
4/23/2020 7:36 PM
I am interested in the reference product for an industrial control application. My question is regarding the input power needs for a 1500W 48VDC motor. Can you suggest any sources for a power supply of that size? The end user has 240VAC and 480VAC 1/3 phase power available.
Was this review helpful? Yes No (1/0)
ATO Responded
We can proivde customized transformer of 5kVA capacity with 1-phase, 240V AC and output will be DC 48V.
Something need to confirm before buying
5
Malik
Avatar
8/16/2020 7:34 PM
For your 2hp, 48VDC BLDC motor, can we feed its matched controller "BLD-100A" with 52VDC supply only?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, the voltage range of the BLD-100A controller is DC 24-72V, so you can use the power supply DC 52V, with no problem.
Want to buy a BLDC motor kit
5
Darcy
Avatar
1/25/2021 7:09 PM
I want to buy a BLDC motor kit, what will be the cost for sending a motor 2 hp (1.5 kW) 48V 3000rpm brushless DC motor and a controller ATOBLD-100 to an address in the Netherlands?
Was this review helpful? Yes No (0/0)
ATO Responded
It is free shipping to the Netherlands (by Air).
Related parameters of 2hp brushless DC motor kit
5
Tamara
Avatar
5/11/2021 9:58 PM
Is it possible to close the 2 hp BLDC motor end where the shaft is visible and have the motor meet an IP rating? What is maximum temperature level on the case of the motor?
Was this review helpful? Yes No (0/0)
ATO Responded
The maximum temperature of the motor casing is 85°C, and the end of the motor shaft will not affect IP protection level (IP54), so no need to close anything.
2 hp brushless DC motor kit related information
5
Karthik
Avatar
5/31/2021 8:46 PM
Do you have a rating for overhung load on the output shaft for the 40:1 and 50:1 planetary gear boxes for your 2hp BLDC motor?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, maximum radial force: 2840N, and maximum axial force: 2100N.
2 hp brushless DC motor kit sold items
5
Gardy
Avatar
6/15/2021 9:21 PM
I am interested in your 2 hp brushless DC motor. Do you sell speed controller and power supply for it?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we sell the controller but not the DC supply.
I am interested in your 2 hp brushless DC motor
5
Rsmith
Avatar
12/26/2021 8:15 PM
We are interested in your 2 hp (1.5 kW) 36V/48V 3000rpm brushless DC motor but with for an 18V DC voltage.
Was this review helpful? Yes No (0/0)
ATO Responded
No, 36VDC or 48VDC only. If the voltage is 18VDC, the current will be high and we do not recommend/supply it.
Questions about 2 hp BLDC
5
Evotrix
Avatar
12/28/2021 8:07 PM
What is the specs of potentiometer that can be used with our 2HP BLDC motor?
Was this review helpful? Yes No (0/0)
ATO Responded
When using the external potentiometer to adjust the speed, use the potentiometer with resistance value of 10KΩ.
Looking for a electric motor
5
Isaiah
Avatar
5/27/2022 12:46 AM
I'm looking for a electric motor, 2hp-3hp 36-48vdc, 4000rpm. Can you please provide me with more information on price if you have?
Was this review helpful? Yes No (0/0)
ATO Responded
We can customize a brushless motor with 2 hp 1.5 kW, 48vdc, 4000rpm. Prices are as shown on the website, free shipping, and the lead time will be approx 25 days.
Buying ATO D110BLD 1500
5
Ronnie
Avatar
2/13/2023 1:44 PM
The ATO BD1500 can I stop
Was this review helpful? Yes No (0/0)
Some question of DC motor
5
trond
Avatar
6/14/2023 12:01 AM
Thank you for getting back to us so promptly. I have attached a video of the error LED flashing and a picture of the wiring.
Do note that for wiring I did not attach the green/yellow wires that you can see in the photo when powering up.
One thing I did realize is that I have a 36V DC power supply but am not providing high current to the motor. Is there a specific power supply I should be using?
Additionally there is a 3-wire cable coming from the base of the motor that seems to be undocumented in the motor manual. What is the purpose of this?
Was this review helpful? Yes No (0/0)
ATO Responded
1. The motor needs a 36V 80A power supply.
2. Please refer to this video wiring: https://youtu.be/5EWF3KWIg2E
Is it possible to control DC motor with a torque command?
5
norbert
Avatar
8/29/2023 1:54 AM
I am currently working with a BD100 controller.
Is it possible to control my motor with a torque command?
I don't see enough information in the documentation, more details would be appreciated.
Was this review helpful? Yes No (0/0)
ATO Responded
May I ask what signal you want to use to control the motor?
If it is RS485, you can refer to this video: https://www.youtube.com/watch?v=gGVdhISJeC4
Does the DC motor controller have a built-in torque control mode?
5
khaled
Avatar
8/29/2023 2:43 AM
Thanks for the video, it helps a lot.
Yes, I will control the motor through RS485.
Does the controller have a built-in torque control mode?
Or do I have to implement it on my computer and then control the motor with a speed or PWM command?
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, this brushless motor controller does not have a built-in torque control mode.
The control mode you mentioned is only available in servo motors. But this controller BD100 supports PWM signal input.
Running at 60v
5
Noah
Avatar
10/31/2023 12:11 PM
Has this motor been tested running at 60V? Can this motor run at 60V?
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, none of the specifications on this page can be used in a 60V environment. 60V specification motors are customized specifications, please contact our sales for details.
Customization requirements
4
Berkner
Avatar
8/3/2026 3:04 AM
I am interested in purchasing a brushless DC motor with a rated power of 1.5kW or 1.0kW, a rated voltage of 60V, and a speed of up to 3000rpm. I noticed that the product description mentions that the voltage can be customized?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can customize a 2 hp (1.5 kW) Brushless DC Motor, 60V, 4.78 Nm, 3000rpm. Does this motor require a brake? The default motor cable length is 1 meter; is it necessary to extend the motor cable?
Only registered users can write reviews
Customers who bought this item also bought

2.5 hp (1.9 kW) Brushless DC Motor, 48/72/96V, 6 Nm

ATO-BLDC-1900R3
$553.28
Cheap and best 2.5 hp (1.9 kW) brushless DC electric motor combines with BLDC motor controller at 48V/72V/96V voltage. 3 phase DC motor has 3000 rpm, 6 Nm holding torque, brushless design for long periods of operation.

300W Brushless DC Motor, 24V/48V, 0.96 Nm

ATO-BLDC-300R3
$287.52
Fair price 300W BLDC motor kit ( brushless DC motor + controller + gearbox) best for electric car, three phase bldc electric motor provides 3000 rpm rated speed at 24V/ 48V, 0.96 Nm holding torque and peak torque to 2.87 Nm.

Small Through Hole Slip Ring, 12.7mm/20mm Inner Diameter

ATO-THSR-12720
$140.47
Small through hole slip rings are electrical slip rings with small apertures. Inner diameter 12.7mm has optional outer diameter of 35mm/56mm. Inner diameter 20mm has optional outer diameter of 42mm/56mm. It can stably transfer small currents or signals of 6~24 wires 5A or 6~24 wires 10A, support signal and power hybrid transmission.

Absolute Encoder, 10 bit, Single Turn, RS485/ CAN/ SSI

ATO-RE-3910
$123.81
Cheap rotary encoder for sales online. Single turn absolute encoder with 10 bit, RS485/ CAN/ SSI three communication interfaces for selection, working voltage 5V/ 24V are available, absolute rotary encoder with 50mA/ 100mA working current. The shaft encoder is widely used inmachine tools, food machinery, elevators and other special equipment.

1 hp (750W) Brushless DC Motor, 24V/48V/72V, 2.4 Nm

ATO-BLDC-750R3
$352.77
1 hp (750W) brushless DC electric motor with reasonable price, 3 phase 4 pair of poles design, 3000 rpm rated speed, 2.3 Nm holding torque, works at 24V/48V DC power supply. Buy BLDC motor controller and gearbox combines with the BLDC motor will provide you higher torque.