Absolute Encoder, 14 Bit, Single Turn, RS485/ CAN

$193.65
Single turn rotary encoder with single turn, 14 bit absolute encoder with natural binary code encoded output, working voltage 5V/ 24V can be chosen, the shaft encoder with shaft diameter 6mm/ 8mm, blind hole 8mm are optional. The absolute rotary encoder is used in computer input devices such as optomechanical mice and trackballs, controlled stress rheometers, and rotating radar platforms.
SKU: ATO-RE-3914
*
*
Free Shipping
Delivery date: 6-12 days

Economical price absolute rotary encoder has RS485/ CAN two communication interfaces for selection, single turn absolute encoder with 50mA/ 100mA working current. 14 position rotary encoder offers high quality, high resolution and optional installation advantages.

Specification

ModelATO-RE-38R016384ATO-RE-38C016384
Electrical parametersCommunication interfaceRS485CAN
ProtocolModbus rtuCAN 2.0
Working voltage5V-24V
Working current50 mA100 mA
Baud rate9600-115200 (default 9600)50k-1000k (default 500k)
Resolution14 bit (16384)
Encoded outputNatural binary code
Outer diameter/ shaft diameter39mm/ 50mm/ 39mm
Shaft diameter/ blind hole6mm/ 8mm/ 8mm
Working current50 mA
Linearity0.001
Kernel refresh cycle50 uS
Station number/ address1-127 (default 1)
Electrical life>100000h
Mechanical parametersMaximum mechanical speed1000 rpm
Shell/ flange materialZinc-nickel coated steel/ Aerospace aluminum
Shaft materialStainless steel
Bearing materialBearing steel
Maximum load of the shaftAxial 20N, radial 80N
Starting torque0.006 Nm
Environmental parametersOperating temperature-40-85℃
Storage temperature-40-85℃
Humidity98% (No condensation)
WaterproofShell: IP54/ IP67; Shaft, bearing: IP65/ IP67
Wiring methodsRedPositive power supply (5V, 9-24V)
BlackGround (GND)
YellowZR
GreenRS485BCANH
WhiteRS485ACANL


Dimension (mm)

  • Shaft diameter 6mm, IP54

Dimension of rotary encoder shaft 6mm

  • Shaft diameter 8mm, IP54

Dimension of rotary encoder of shaft 8mm

  • Blind hole 8mm, IP54

Dimension of rotary encoder of blind hole 8mm

  • Shaft diameter 6mm, IP67

Dimension od rotary encoder of 6mm of IP67

  • Shaft 8mm, IP67

Dimension of Rotary Encoder of 8mm IP67

Customer Feedback

Rotary encoder customer feedback

Application

Rotary encoder application

Tips: Precautions for Installing and Using Rotary Encoder.

1. Although the encoder itself will not lose the number of turns in the interference environment, it will cause interference to the data in the transmission process, so when there is a motor in the system or a strong electromagnetic interference environment, the encoder power supply should use an isolated power supply and external extension. It is best to use double-shielded cables and other measures for the communication line.
2. The outer shell of the encoder shell and shielded cable should be well grounded to prevent damage to the encoder circuit due to lightning strikes or high-voltage static electricity!
3. Except for the above zero-setting (yellow wire) allows grounding, any other signal wires of the encoder are forbidden to be short-circuited with each other. After power-on, avoid accidentally touching the signal wires, otherwise it may cause permanent damage to the
circuit!

Absolute Encoder Serial Communication Debugging (RS485 port)

This video demonstrates absolute encoder serial communication debugging. We have various absolute encoders with different resolutions, such as: 10-bit, 12-bit, 14-bit, etc. RS485/ CAN/ SSI communication can be customized, and the protocol uses Modbus rtu, CAN 2.0, SSI serial protocol.

Product reviews
Inexpensive 14-bit absolute encoder
5
Samlam
Avatar
1/20/2022 6:32 PM
I've used expensive absolute encoders at previous jobs. It's very cheap and durable, and I recommend it to everyone.
Was this review helpful? Yes No (0/0)
I'd like to know somthing
5
Lucas
Avatar
2/6/2024 12:01 AM
I would like to purchase 4 14-bit Absolute Encoders with a CAN interface. I'd like to know the length of the cable and the connector that is on the cable, please. Thank you.
Was this review helpful? Yes No (0/0)
ATO Responded
This 14-Bit Absolute encoder with a CAN interface, the default cable is 1.2m, can be customized and lengthened, and the lead time of 4 units is 5-7 days.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Economical price absolute rotary encoder has RS485/ CAN two communication interfaces for selection, single turn absolute encoder with 50mA/ 100mA working current. 14 position rotary encoder offers high quality, high resolution and optional installation advantages.

Specification

ModelATO-RE-38R016384ATO-RE-38C016384
Electrical parametersCommunication interfaceRS485CAN
ProtocolModbus rtuCAN 2.0
Working voltage5V-24V
Working current50 mA100 mA
Baud rate9600-115200 (default 9600)50k-1000k (default 500k)
Resolution14 bit (16384)
Encoded outputNatural binary code
Outer diameter/ shaft diameter39mm/ 50mm/ 39mm
Shaft diameter/ blind hole6mm/ 8mm/ 8mm
Working current50 mA
Linearity0.001
Kernel refresh cycle50 uS
Station number/ address1-127 (default 1)
Electrical life>100000h
Mechanical parametersMaximum mechanical speed1000 rpm
Shell/ flange materialZinc-nickel coated steel/ Aerospace aluminum
Shaft materialStainless steel
Bearing materialBearing steel
Maximum load of the shaftAxial 20N, radial 80N
Starting torque0.006 Nm
Environmental parametersOperating temperature-40-85℃
Storage temperature-40-85℃
Humidity98% (No condensation)
WaterproofShell: IP54/ IP67; Shaft, bearing: IP65/ IP67
Wiring methodsRedPositive power supply (5V, 9-24V)
BlackGround (GND)
YellowZR
GreenRS485BCANH
WhiteRS485ACANL


Dimension (mm)

  • Shaft diameter 6mm, IP54

Dimension of rotary encoder shaft 6mm

  • Shaft diameter 8mm, IP54

Dimension of rotary encoder of shaft 8mm

  • Blind hole 8mm, IP54

Dimension of rotary encoder of blind hole 8mm

  • Shaft diameter 6mm, IP67

Dimension od rotary encoder of 6mm of IP67

  • Shaft 8mm, IP67

Dimension of Rotary Encoder of 8mm IP67

Customer Feedback

Rotary encoder customer feedback

Application

Rotary encoder application

Tips: Precautions for Installing and Using Rotary Encoder.

1. Although the encoder itself will not lose the number of turns in the interference environment, it will cause interference to the data in the transmission process, so when there is a motor in the system or a strong electromagnetic interference environment, the encoder power supply should use an isolated power supply and external extension. It is best to use double-shielded cables and other measures for the communication line.
2. The outer shell of the encoder shell and shielded cable should be well grounded to prevent damage to the encoder circuit due to lightning strikes or high-voltage static electricity!
3. Except for the above zero-setting (yellow wire) allows grounding, any other signal wires of the encoder are forbidden to be short-circuited with each other. After power-on, avoid accidentally touching the signal wires, otherwise it may cause permanent damage to the
circuit!

Product reviews
Inexpensive 14-bit absolute encoder
5
Samlam
Avatar
1/20/2022 6:32 PM
I've used expensive absolute encoders at previous jobs. It's very cheap and durable, and I recommend it to everyone.
Was this review helpful? Yes No (0/0)
I'd like to know somthing
5
Lucas
Avatar
2/6/2024 12:01 AM
I would like to purchase 4 14-bit Absolute Encoders with a CAN interface. I'd like to know the length of the cable and the connector that is on the cable, please. Thank you.
Was this review helpful? Yes No (0/0)
ATO Responded
This 14-Bit Absolute encoder with a CAN interface, the default cable is 1.2m, can be customized and lengthened, and the lead time of 4 units is 5-7 days.
Only registered users can write reviews
Customers who bought this item also bought

Digital Rotary Torque Sensor, 0.1/5/300/1000 Nm to 10000 Nm

ATO-TQS-D03
$939.15
Digital rotary torque sensor with LCD display has the capacity range from 0.1 Nm/0.3 Nm/1 Nm/5 Nm/10 Nm/300 Nm/1000 Nm to 10000 Nm. LCD display can show torque, speed and power value at the same time. Dynamic torque sensor adopts two NSK shafts to ensure starting torque as low as 0.00001 Nm. Rotary torque transducer with 7 pin waterproof circular connector and 3m cable can measure both forward and reverse torque, and then output ±5V/0-10V/4-20mA/RS485 torque signal to PLC.