750 W DC Worm Gear Motor, 24V/48V

$819.56
Low price 750 W DC worm gear motor is a BLDC motor with worm gearbox used for electric car, renewable energy systems and industrial equipment. It provides 2000 rpm high speed at 24V, 36V or 48V, low noise, and selectable gear ratio form 7.5:1 to 100:1.
SKU: ATO-GEAR-W750
*
*
Free Shipping
Delivery date: 6-25 days

750 W BLDC motor is equipped with worm gearbox providing high speed and high efficiency at 24V, 36V or 48V power supply. Its power, voltage, speed, shaft, motor length and lead can be customized.

Specification

Motor ModelATOD5BLD750-24AATOD5BLD750-36AATOD5BLD750-48A
Motor TypeBLDC Motor
Power750W
Voltage24V DC36V DC48V DC
Rated Current39.06A26.04A19.53A
No Load Current<9.2A<8.13A<6.5A
No Load Speed2700 rpm
Rated Speed2000 rpm
Rated Torque2.39N·m
Peak Torque7.17N·m
Motor Dimension86mm
Shaft Diameter11mm
ConstructionPermanent Magnet
Direction of RotationCW/CCW
CertificateCCC, CE, ROSH, LVD, EMC
Gear Ratio7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100
Recommended Drive ModelATO-BD100ATO-BLD50AATO-BLD750
What Parameters of ATO Worm Gear Motors Can Be Customized?
PowerYes
VoltageYes
SpeedYes
ShaftYes
Motor LengthYes
Motor LeadYes

Allowable Torque with Gear Head

Gear Ratio7.5101520253040506080100
Rated Output Speed (rpm)26720013310080675040332520
Rated Output Torque (Nm)21.528.743.055.968.079.568.054.060.052.040.0

Note:

  • This torque value is the rated output value of the reducer, not the final motor + output torque value T after reducer.
  • The formula for calculating the output torque after the final motor + reducer: T = rated torque of the motor * reduction ratio * 0.6, and T≤ rated allowable output torque value of the reducer.

Dimensions (Unit: mm)

Mounting screws are included with gearhead

Dimensions of 750 W DC Worm Gear Motor

Speed-Torque Curve

750 W DC Worm Gear Motor Speed Torque Curve

  • Instantaneous maximum torque line
    The maximum torque momentarily impacts the load when the motor is started.
    Beyond this torque, the over-current protection of the driver will cause the motor to stop.
  • Short time operation area
    The motor can run at a short time within this torque range at different speeds.
    If the operation time is too long, the motor will generate heat, which may cause the motor to stop or burn.
  • Rated operating torque line
    The rated torque of motor running at different speeds, and the motor can run for a long time at this torque.
  • Continuous operating area
    When the motor rotates at different speeds, it runs continuously in this corresponding zone.

Details

750W DC Worm Gear Motor Details

Tips

The main power transmission mode of DC worm gear motor is staggered and vertical. Such a simple structure can reduce the utilization rate of space to a certain extent and save installation steps.

The transmission mode of the worm gear motor is currently the most popular power transmission used in various mechanical equipment. In general, such a compact type of reducer conforms to the needs of the development of the times, continues to be effective, stable and reliable.

Obviously, it is impossible to see the uneven load distribution of the ordinary motor which leads to the damage of the mechanism. The vertical transmission of power has a very good effect and cancels the load pulse generated. It is also true that worm gear motors are used to transmit loads with higher torque.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
Great value and functionality.
5
Seaman
Avatar
4/14/2022 7:35 PM
Incredible quality and craftsmanship. Exactly what I needed. Very sturdy 750W worm gear motor with good torque. I like size and weight works well on my conveyor. I am very happy with what I have received and I will do more business with this company.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

750 W BLDC motor is equipped with worm gearbox providing high speed and high efficiency at 24V, 36V or 48V power supply. Its power, voltage, speed, shaft, motor length and lead can be customized.

Specification

Motor ModelATOD5BLD750-24AATOD5BLD750-36AATOD5BLD750-48A
Motor TypeBLDC Motor
Power750W
Voltage24V DC36V DC48V DC
Rated Current39.06A26.04A19.53A
No Load Current<9.2A<8.13A<6.5A
No Load Speed2700 rpm
Rated Speed2000 rpm
Rated Torque2.39N·m
Peak Torque7.17N·m
Motor Dimension86mm
Shaft Diameter11mm
ConstructionPermanent Magnet
Direction of RotationCW/CCW
CertificateCCC, CE, ROSH, LVD, EMC
Gear Ratio7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100
Recommended Drive ModelATO-BD100ATO-BLD50AATO-BLD750
What Parameters of ATO Worm Gear Motors Can Be Customized?
PowerYes
VoltageYes
SpeedYes
ShaftYes
Motor LengthYes
Motor LeadYes

Allowable Torque with Gear Head

Gear Ratio7.5101520253040506080100
Rated Output Speed (rpm)26720013310080675040332520
Rated Output Torque (Nm)21.528.743.055.968.079.568.054.060.052.040.0

Note:

  • This torque value is the rated output value of the reducer, not the final motor + output torque value T after reducer.
  • The formula for calculating the output torque after the final motor + reducer: T = rated torque of the motor * reduction ratio * 0.6, and T≤ rated allowable output torque value of the reducer.

Dimensions (Unit: mm)

Mounting screws are included with gearhead

Dimensions of 750 W DC Worm Gear Motor

Speed-Torque Curve

750 W DC Worm Gear Motor Speed Torque Curve

  • Instantaneous maximum torque line
    The maximum torque momentarily impacts the load when the motor is started.
    Beyond this torque, the over-current protection of the driver will cause the motor to stop.
  • Short time operation area
    The motor can run at a short time within this torque range at different speeds.
    If the operation time is too long, the motor will generate heat, which may cause the motor to stop or burn.
  • Rated operating torque line
    The rated torque of motor running at different speeds, and the motor can run for a long time at this torque.
  • Continuous operating area
    When the motor rotates at different speeds, it runs continuously in this corresponding zone.

Details

750W DC Worm Gear Motor Details

Tips

The main power transmission mode of DC worm gear motor is staggered and vertical. Such a simple structure can reduce the utilization rate of space to a certain extent and save installation steps.

The transmission mode of the worm gear motor is currently the most popular power transmission used in various mechanical equipment. In general, such a compact type of reducer conforms to the needs of the development of the times, continues to be effective, stable and reliable.

Obviously, it is impossible to see the uneven load distribution of the ordinary motor which leads to the damage of the mechanism. The vertical transmission of power has a very good effect and cancels the load pulse generated. It is also true that worm gear motors are used to transmit loads with higher torque.

Product reviews
Great value and functionality.
5
Seaman
Avatar
4/14/2022 7:35 PM
Incredible quality and craftsmanship. Exactly what I needed. Very sturdy 750W worm gear motor with good torque. I like size and weight works well on my conveyor. I am very happy with what I have received and I will do more business with this company.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

1 hp (750W) Brushless DC Motor, 24V/48V/72V, 2.4 Nm

ATO-BLDC-750R3
$352.77
1 hp (750W) brushless DC electric motor with reasonable price, 3 phase 4 pair of poles design, 3000 rpm rated speed, 2.3 Nm holding torque, works at 24V/48V DC power supply. Buy BLDC motor controller and gearbox combines with the BLDC motor will provide you higher torque.

2 hp (1.5 kW) Brushless DC Motor, 36V/48V, 4.78 Nm

ATO-BLDC-1500R3
$432.36
Buy best 1500 watt brushless DC motor kit (3 phase BLDC motor and controller) at low price for your electric car. Motor features 3000 rpm rated speed, 4.78 Nm holding torque, peak torque up to 14.33 Nm, working at 36V / 48V DC power supply.

1 kW Brushless DC Motor, 36V/48V, 3.18 Nm, 3000 rpm

ATO-BLDC-1000R3
$415.85
Good price 1 kW 36V/48V BLDC motor and controller for sales, electric motor with 3000 rpm rated speed, 3.18 Nm holding torque, brushless design for long life, cost-effective replacement for brush DC motors. 3 phase brushless DC motor kit best for electric car.

600W Brushless DC Motor, 24V/48V/72V, 6 Nm

ATO-BLDC-600R1
$505.88
Reasonable price 3 phase 600W brushless DC motor combines with BLDC controller/ gearbox, operates at 24V/ 48V/ 72V DC, provides 6 Nm holding torque, 1000 rpm low speed and more reliable, peak torque up to 18 Nm.

1000 W DC Worm Gear Motor, 24V/48V

ATO-GEAR-W1000
$961.81
High torque 1000 W DC worm gear motor with gear ratio from 7.5:1 to 100:1, provides 2000 rpm rated speed at 24V or 48V, rated torque at 3.18N·m and peak torque at 9.54N·m. This BLDC gear motor is easy for speed adjustment and reversible direction.