Buy 1000W 3 phase brushless DC motor at reasonable price. 110mm square flange size, rated speed of 3000 rpm, 36 volt, 48 volt DC supply voltage optional, hall signals for velocity feedback. The matching BLDC motor controller and gearbox are available here. ATO recommends buying a set of BLDC motors, which is an economical solution in the long run.
Basic Specifications
- Model: ATO-D110BLD1000
- Matched Controller Model: ATO-BD100 (24V)/ATO-BD50 (36V/48V)
- Rated Power: 1000W
- Rated Voltage: 24V DC/ 36V DC / 48V DC (Optional)
- Rated Current: 52.08A at 24V, 34.72A at 36V, 26.04A at 48V
- Phase: 3 phase
- Holding Torque: 3.18 Nm
- Peak Torque: 9.55 Nm
- Rated Speed: 3000 rpm for standard (or 2000 rpm when matching the worm gearbox)
- No-load Speed: 4200 rpm
- Square Flange Size: 110 mm
- Weight: 4.2 kg
Technical Parameters
- Working Efficiency: 85%
- Number of Poles: 4 pairs of poles (8 poles)
- Brake Apparatus Voltage: 24V DC/ 48V DC, (If 24V voltage is not connected, the motor brake)
- Brake Size: Φ76.8*27.7mm
- Brake length: 40-50mm
- Insulation Grade: F
- Protection Grade: IP54
- Working Temperature: 10℃~+40℃
- Humidity: ≤90% (no condensation)
- Motor Lead Length: 100 cm
- Certificate: CE, RoHS, ISO/TS16949
Note: Power, Voltage, Speed, Shaft, Motor Length, and Motor Lead of ATO BLDC Motors can be customized.
Features
- High performance and low consumption
1000W brushless DC motor is three phase electric motor, which especially suited for application requiring higher efficiency and power density. - Wide application range and good control effect
Brushless dc motor works with a matching controller (ATO-BD100) may achieve simple to complex control, turn from CW to CCW, and meet various communication requirements (RS232, RS485, CAN, etc.). BLDC controller can be controlled through 0-5VDC analog signal to adjust the speed. - Wide control speed torque range
Brushless dc motor works with a gearbox (choose planetary gearbox with gear ratio from 4:1 to 200:1 or worm gearbox with gear ratio from 7.5:1 to 100:1) effectively reduce the motor's speed and moment of inertia to increase torque in your application, because the gearbox can control the start/stop and change speed in time. - Low noise and smooth operation
Brushless dc motor has no brushes, no sparks will be generated during operation, which greatly reduces friction. - Good protection performance and continuous duty (24/7)
1kW 48V BLDC motor kit adopts a new type of sealing device, which has good protection performance and strong adaptability to the environment, and works continuously in harsh environments such as corrosion and humidity.
Line Define

Motor Dimension (Unit: mm)

Speed-Torque Diagram

- Instantaneous maximum torque line
The maximum torque momentarily impacts the load when the motor is started.
Beyond this torque, the over-current protection of the driver will cause the motor to stop. - Short time operation area
The motor can run at a short time within this torque range at different speeds.
If the operation time is too long, the motor will generate heat, which may cause the motor to stop or burn. - Rated operating torque line
The rated torque of motor running at different speeds, and the motor can run for a long time at this torque. - Continuous operating area
When the motor rotates at different speeds, it runs continuously in this corresponding zone.
Characterstic Curve

Details

Tips: How to Select 1000 watt BLDC Motor?
The followings are the main parameters that need to be referenced when selecting 1 kW 48V brushless DC motors:
- The maximum torque: Can be obtained by adding the load torque, moment of inertia and friction, in addition, there are some additional factors that affect the maximum torque, such as air gap air resistance and so on.
- Squared Modular Torque: It can be approximated as the continuous output torque required by the actual application. It depends on many factors: maximum torque, load torque, moment of inertia, acceleration, deceleration and running time.
- Speed: This is the speed according to the application needs, according to the motor speed trapezoidal curve to determine the motor speed requirements, usually leave 10% margin.
Product reviews
Recently I have made several purchases from ATO.com
Jesse Deel
11/6/2018 7:10 PM
Recently I have made several purchases from ATO.com. I have always received great service, quick turn around, and timely delivery of their excellent products like this 1kW 48V brushless dc motor. Nothing but positives in every aspect of conducting business. I highly recommend them!
Was this review helpful? (0/0)
Very good BLDC motor and recommended controller
Kristen
1/16/2019 7:07 PM
Very good BLDC motor and recommended controller, arrived on time with solid package.
Was this review helpful? (0/0)
technical specs
VISHNU
5/20/2019 3:34 AM
Sir, I wish to know more about this BLDC motor. Kindly clarify my doubts.
1) Whether this model can be used for electric vehicle applications.
2)What is the number of poles
3) Please mention the stator resistance and inductance values.
4)What is the maximum load torque it can handle.
Awaiting for your responses. My email is psvishnuchentrappinni@gmail.com
1) Whether this model can be used for electric vehicle applications.
2)What is the number of poles
3) Please mention the stator resistance and inductance values.
4)What is the maximum load torque it can handle.
Awaiting for your responses. My email is psvishnuchentrappinni@gmail.com
Was this review helpful? (0/0)
Tracking number for the order
Ron
6/27/2019 8:34 PM
Can you please give me a tracking number and status for this order?
Was this review helpful? (1/0)
Is the 48V 3000rpm Brushless DC Motor with Planet Gearbox 16:1 also usable as a generator for a Savonius wind turbine?
Andreas
9/21/2019 9:38 AM
Is the 48V 3000rpm Brushless DC Motor with Planet Gearbox 16:1 also usable as a generator for a Savonius wind turbine?
and if so, there is a power curve at which which power is generated.
and a value of the NM resistance from the engine gearbox that must be
and if so, there is a power curve at which which power is generated.
and a value of the NM resistance from the engine gearbox that must be
Was this review helpful? (0/0)
We are looking forward to buying your 1kW BLDC motor with 48V
Gus Bisbal
4/12/2020 6:55 PM
We are looking forward to buying your 1kW BLDC motor with 48V, and have the following inquiries please:
1. Can this motor be ordered with a double-extended shaft (e.g. the shaft extends from the back of the motor - like used for an electric brake application, but without the brake)?
2. Can the 30:1 ratio worm gearbox for this motor be used with output shaft from the gearbox pointed in a vertical direction?
3. Can the 30:1 worm gearbox be ordered separately, without the motor?
1. Can this motor be ordered with a double-extended shaft (e.g. the shaft extends from the back of the motor - like used for an electric brake application, but without the brake)?
2. Can the 30:1 ratio worm gearbox for this motor be used with output shaft from the gearbox pointed in a vertical direction?
3. Can the 30:1 worm gearbox be ordered separately, without the motor?
Was this review helpful? (0/0)
What battery used for the 1 kW 36V/48V 3000rpm brushless DC motor?
Kim Nguyen
5/10/2020 7:21 PM
Do you have recommendation on what battery used for the 1 kW 36V/48V 3000rpm brushless DC motor, so the motor can run 8 hour per day?
Was this review helpful? (0/0)
1 kW 36V/48V 3000rpm Brushless DC Motor
Jeff
8/23/2020 10:14 PM
Do you have a full specs of 1 kW 36V/48V 3000rpm Brushless DC Motor and its motor controller?
Was this review helpful? (0/0)
About the cooling problem of 1kW brushless DC motor kit
Tritton
4/18/2021 8:06 PM
What is the efficiency of your 1kW brushless DC motors kit? What kind of cooling does it need?
Was this review helpful? (0/0)
Use of 1kW brushless DC motor kit
Obaya
5/26/2021 9:30 PM
Can we use 1000R3 BLDC motor with mounting pulley and use belt drive?
Was this review helpful? (0/0)
High quality 1kW brushless DC motor
Merchant
6/22/2021 11:39 PM
Would you have a BLDC motor controller that supports 54VDC, that what is available for us?
Was this review helpful? (0/0)
Regenerative braking possibilities
Weng Han
8/11/2021 6:32 AM
Hi, we recently bought this 48V motor with 7:1 planetary gearbox, and would like to ask a few more questions:
1. Can this motor be used in regenerative braking?
2. Does the motor controller also support regenerative braking, aka. reverse current to battery?
3. If yes, how to configure it to output power back to the battery?
1. Can this motor be used in regenerative braking?
2. Does the motor controller also support regenerative braking, aka. reverse current to battery?
3. If yes, how to configure it to output power back to the battery?
Was this review helpful? (0/0)
mounting brackets
Peter
9/21/2021 2:49 PM
I would like a contact or source for a mounting bracket for this motor please.
Was this review helpful? (0/0)
I am interested in your 3000rpm brushless DC motor
Horowitz
10/14/2021 8:34 PM
We are interested in buying one unit, ATO-BLDC-1000R3, as a test sample with brake and matched control. Our electrical machine we are using today we communicate by CAN open. If we understand your manual correctly, we can still use CAN open by your separate matched control unit. Is that correct? What program do we need to transfer the PLC program into the matched controller?
Was this review helpful? (0/0)
Output torque and speed of 1kW brushless DC motor
Brittany
12/1/2021 7:22 PM
For your 1000W BLDC motor which provides 3000rpm and 10Nm rated, what will be 3:1 gear output torque and speed if we install it?
Was this review helpful? (0/0)
Please help me to solve DC motor problem
jennie
7/27/2023 1:16 AM
Thank you very much for your e-mail.
In the meanwhile, I have a technical question.
I hope you will be able to answer it.
I have another motor-controller combination running but now it does not work any longer. It has been functioning correctly so far, but when I connect the power, the green light on the controller does not come on. Only the red light lights up and then fades away in a couple of seconds. The motor will not start running.
Would you, or the ATO engineers be able to tell what is the matter here?
In the meanwhile, I have a technical question.
I hope you will be able to answer it.
I have another motor-controller combination running but now it does not work any longer. It has been functioning correctly so far, but when I connect the power, the green light on the controller does not come on. Only the red light lights up and then fades away in a couple of seconds. The motor will not start running.
Would you, or the ATO engineers be able to tell what is the matter here?
Was this review helpful? (0/0)
I hope you can tell me what is DC motor wrong
xena
7/27/2023 3:29 AM
Thank you very much for your e-mail. I will send you a short video via Wetransfer. In this video, you can see what happens if I try to start up the controller.
When the power (2 kW switched power supply, 48V) is plugged in the red light lights up and then slowly extinguishes.
In the video, it seems to blink but in reality, that is not the case.
This is due to the frame rate of the recording. In reality, it just fades out.
I hope you will be able to tell me what is wrong.
With kind regards.
When the power (2 kW switched power supply, 48V) is plugged in the red light lights up and then slowly extinguishes.
In the video, it seems to blink but in reality, that is not the case.
This is due to the frame rate of the recording. In reality, it just fades out.
I hope you will be able to tell me what is wrong.
With kind regards.
Was this review helpful? (0/0)
48V, 50amp battery to supply the power to DC motor
luna
7/30/2023 11:49 PM
Hi, I've purchased a 1kW brushless DC 48V motor, with the SKU: ATO-BLDC-1000R3, with an included controller ATO-BD50.
I have a 48V, 50amp battery to supply the power to it, but I'm wondering if the 50 amps battery supply would break/burnout the controller if I'm running the motor at maximum power.
I have a 48V, 50amp battery to supply the power to it, but I'm wondering if the 50 amps battery supply would break/burnout the controller if I'm running the motor at maximum power.
Was this review helpful? (0/0)
Does the brake add considerable length to the motor?
Ethan
10/23/2023 3:13 AM
We have a 48V system, undecided on the brake yet. Does the brake add considerable length to the motor?
Was this review helpful? (0/0)
Brushless DC Motor
Blake
11/27/2023 8:04 PM
For this motor, do you offer a NEMA42 sized power-off brake? This brake will lock the rotor when power to the brake is <Off>, and will only unlock the rotor when power to the brake is <On>.
Was this review helpful? (0/0)
Something wrong with this motor
Mia
1/8/2024 12:40 AM
We have a problem for the motor we bought from you ATO-BLDC-1000R3.
On the controller there is a red LED blinking 2 times and we don't know how to reset the fault. Can you help us with this?
And how much breaking current does the controller allow?
On the controller there is a red LED blinking 2 times and we don't know how to reset the fault. Can you help us with this?
And how much breaking current does the controller allow?
Was this review helpful? (0/0)
Only registered users can write reviews
Customers who bought this item also bought
Tension and Compression Load Cell, 1 kg - 500 kg
ATO-LC-TC01
$137.98
Tension and compression load cell can bear both tension and pressure, with good anti-eccentric load performance, low height, all sealed structure and complete specifications. Miniature load cell with optional capacity 1 kg/ 100kg/ 200 kg/ 300kg/ 500 kg is suited to use in restricted spaces, such as using in vehicle/test instrument/laminator measurement and control.
Load Cell Transmitter, Output 0-5V/0-10V/4-20mA
ATO-LCTR-OA
$81.27
Load cell transmitter is made of aluminum alloy, output standard signal 0-5V/0-10V/4-20mA, has linear compensation, humidity compensation, external zero debugging, external span debugging, input overload protection and output short circuit protection functions.
1 hp (750W) Brushless DC Motor, 24V/48V/72V, 2.4 Nm
ATO-BLDC-750R3
$352.77
1 hp (750W) brushless DC electric motor with reasonable price, 3 phase 4 pair of poles design, 3000 rpm rated speed, 2.3 Nm holding torque, works at 24V/48V DC power supply. Buy BLDC motor controller and gearbox combines with the BLDC motor will provide you higher torque.
2 hp (1.5 kW) Brushless DC Motor, 36V/48V, 4.78 Nm
ATO-BLDC-1500R3
$432.36
Buy best 1500 watt brushless DC motor kit (3 phase BLDC motor and controller) at low price for your electric car. Motor features 3000 rpm rated speed, 4.78 Nm holding torque, peak torque up to 14.33 Nm, working at 36V / 48V DC power supply.
500W Brushless DC Motor, 24V/48V, 2.4 Nm
ATO-BLDC-500R2
$376.35
3 phase 500W BLDC motor combines with BLDC motor controller working at 24V/ 48V to provide high torque, with competitive price. Electric DC motor features 2000 rpm rated speed and 2.4 Nm holding torque, brushless design for long life.