600 W DC Worm Gear Motor, 24V/48V

$759.88
High torque 600 W DC worm gear motor with gear ratio from 7.5:1 to 100:1, provides 2000 rpm rated speed at 24V, 36V or 48V, rated torque at 1.91N·m and peak torque at 5.73N·m. This BLDC gear motor is easy for speed adjustment and reversible direction.
SKU: ATO-GEAR-W600
*
*
Free Shipping
Delivery date: 6-25 days

600 W 3 phase BLDC motor matches with worm gearbox providing high torque at 24V, 36V or 48V power supply, gear ratio from 7.5:1 to 100:1 available, high speed and high performance.

Specification

Motor ModelATOD110BLD600-24AATOD110BLD600-36AATOD110BLD600-48A
Motor TypeBLDC Motor
Power600W
Voltage24V DC36V DC48V DC
Rated Current31.25A20.83A15.63A
No Load Current<7.5A<5A<3.8A
No Load Speed2700 rpm
Rated Speed2000 rpm
Rated Torque1.91N·m
Peak Torque5.73N·m
Motor Dimension110mm
Shaft Diameter11mm
ConstructionPermanent Magnet
Direction of RotationCW/CCW
CertificateCCC, CE, ROSH, LVD, EMC
Gear Ratio7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100
Recommended Drive ModelATO-BD100ATO-BLD50AATO-BLD750
What Parameters of ATO Worm Gear Motors Can Be Customized?
PowerYes
VoltageYes
SpeedYes
ShaftYes
Motor LengthYes
Motor LeadYes

Allowable Torque with Gear Head

Gear Ratio7.5101520253040506080100
Rated Output Speed (rpm)26720013310080675040332520
Rated Output Torque (Nm)17.222.934.444.754.463.668.054.060.052.040.0

Note:

  • This torque value is the rated output value of the reducer, not the final motor + output torque value T after reducer.
  • The formula for calculating the output torque after the final motor + reducer: T = rated torque of the motor * reduction ratio * 0.6, and T≤ rated allowable output torque value of the reducer.

Dimensions (Unit: mm)

Mounting screws are included with gearhead

Dimensions of 600 W DC Worm Gear Motor

Speed-Torque Curve

600 W DC Worm Gear Motor Speed Torque Curve

  • Instantaneous maximum torque line
    The maximum torque momentarily impacts the load when the motor is started.
    Beyond this torque, the over-current protection of the driver will cause the motor to stop.
  • Short time operation area
    The motor can run at a short time within this torque range at different speeds.
    If the operation time is too long, the motor will generate heat, which may cause the motor to stop or burn.
  • Rated operating torque line
    The rated torque of motor running at different speeds, and the motor can run for a long time at this torque.
  • Continuous operating area
    When the motor rotates at different speeds, it runs continuously in this corresponding zone.

Details

600W DC Worm Gear Motor Details

Tips: Why does DC worm gear motor produce vibration?

  • The motor, worm gearbox and working machine are not fixed well, check the fixing bolts.
  • The teeth of the worm gear pair are excessively worn and damaged. It is recommended to replace the worm gear pair teeth.
  • The bearing is worn and the gap is large, and it needs to be replaced with a new bearing.
  • The bolts are not fixed properly, check the fixing bolts of each part and tighten them.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
Excellent worm gear motor.
5
Benny
Avatar
3/28/2022 7:49 PM
This 600W worm DC gear motor has good torque and good power capability, perfect for the robotic arm I'm building. It runs exactly at the speed specified. I am buying another. Great value.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

600 W 3 phase BLDC motor matches with worm gearbox providing high torque at 24V, 36V or 48V power supply, gear ratio from 7.5:1 to 100:1 available, high speed and high performance.

Specification

Motor ModelATOD110BLD600-24AATOD110BLD600-36AATOD110BLD600-48A
Motor TypeBLDC Motor
Power600W
Voltage24V DC36V DC48V DC
Rated Current31.25A20.83A15.63A
No Load Current<7.5A<5A<3.8A
No Load Speed2700 rpm
Rated Speed2000 rpm
Rated Torque1.91N·m
Peak Torque5.73N·m
Motor Dimension110mm
Shaft Diameter11mm
ConstructionPermanent Magnet
Direction of RotationCW/CCW
CertificateCCC, CE, ROSH, LVD, EMC
Gear Ratio7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100
Recommended Drive ModelATO-BD100ATO-BLD50AATO-BLD750
What Parameters of ATO Worm Gear Motors Can Be Customized?
PowerYes
VoltageYes
SpeedYes
ShaftYes
Motor LengthYes
Motor LeadYes

Allowable Torque with Gear Head

Gear Ratio7.5101520253040506080100
Rated Output Speed (rpm)26720013310080675040332520
Rated Output Torque (Nm)17.222.934.444.754.463.668.054.060.052.040.0

Note:

  • This torque value is the rated output value of the reducer, not the final motor + output torque value T after reducer.
  • The formula for calculating the output torque after the final motor + reducer: T = rated torque of the motor * reduction ratio * 0.6, and T≤ rated allowable output torque value of the reducer.

Dimensions (Unit: mm)

Mounting screws are included with gearhead

Dimensions of 600 W DC Worm Gear Motor

Speed-Torque Curve

600 W DC Worm Gear Motor Speed Torque Curve

  • Instantaneous maximum torque line
    The maximum torque momentarily impacts the load when the motor is started.
    Beyond this torque, the over-current protection of the driver will cause the motor to stop.
  • Short time operation area
    The motor can run at a short time within this torque range at different speeds.
    If the operation time is too long, the motor will generate heat, which may cause the motor to stop or burn.
  • Rated operating torque line
    The rated torque of motor running at different speeds, and the motor can run for a long time at this torque.
  • Continuous operating area
    When the motor rotates at different speeds, it runs continuously in this corresponding zone.

Details

600W DC Worm Gear Motor Details

Tips: Why does DC worm gear motor produce vibration?

  • The motor, worm gearbox and working machine are not fixed well, check the fixing bolts.
  • The teeth of the worm gear pair are excessively worn and damaged. It is recommended to replace the worm gear pair teeth.
  • The bearing is worn and the gap is large, and it needs to be replaced with a new bearing.
  • The bolts are not fixed properly, check the fixing bolts of each part and tighten them.
Product reviews
Excellent worm gear motor.
5
Benny
Avatar
3/28/2022 7:49 PM
This 600W worm DC gear motor has good torque and good power capability, perfect for the robotic arm I'm building. It runs exactly at the speed specified. I am buying another. Great value.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

1500 W DC Worm Gear Motor, 36V/48V

ATO-GEAR-W1500
$978.32
Buy 1500 W DC worm gear motor for electric car, renewable energy systems and industrial equipment, works with 2000 rpm high speed and 4.78N·m rated torque, selectable 36V or 48V power supply, gear ratio from 7.5:1 to 100:1.