7.5 hp VFD, Single Phase to Three Phase VFD

$697.14
7.5 hp variable frequency drive, single phase to three phase VFD, 28 amps, RS485 enabled, manufacturer direct sale.
SKU: GK3000-2S0055G
Availability: In stock
Free Shipping
Delivery date: 2-12 days

Single phase 7.5 hp VFD, single phase 220V to three phase variable frequency drive, 28 amps. Using it as a phase converter to convert 1-phase 220v (230v, 240v) home power supply to drive 3-phase motors.

Specification:

BasicsModelGK3000-2S0055G
Capacity7.5 hp (5.5 kW)
Shipping weight8 kg
Dimension330*200*200 mm
I/O FeatureRated current28 A
Input voltage1 phase 220~240V AC
Input frequency50Hz/ 60Hz
Output voltage3 phase AC 0~input voltage
Output frequency0Hz~1000Hz
Over load capacity150% of rated current for 1 minute, 180% of rated current for 3 seconds
Control FeatureControl modeV/F, Sensorless vector control (SVC), Speed sensor vector control (FVC)
CommunicationRS485
Speed regulation1:100
Start torque150% of rating torque at 1 Hz
Speed control accuracy≤±0.5% of rating synchronous speed
Frequency precisionDigital setting: max frequency x± 0.01%;
Analog setting: max frequency x± 0.2%
Frequency resolutionAnalog setting: 0.1% of max frequency;
Digital setting: 0.01Hz
Torque boostAutomatic torque boost, manual torque boost 0.1%~30.0%
Interior PID controllerBe convenient to make closed-loop system
Automatic energy save runningOptimize V/F curve automatically based on the load to realize power save running
Automatic voltage regulation (AVR)Can keep constant output voltage when power source voltage varies.
Automatic current limitingLimit running current automatically to avoid frequent over-current which will cause trip
EnvironmentEnclosure ratingIP 20
Temperature–10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5%
Humidity5%-95%, without condensation
Altitude≤1000m; VFD will be derated if above 1000m
Impingement and oscillationNormal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g)
Store environment–20℃~ +60℃; no dust, no corrosive gas, no direct sunlight

Note: ATO VFD Cannot be used as a power source, it Can only be directly connected to an induction motor to control the motor speed.

Details

7.5 hp Single Phase to Three Phase VFD Details

Tips: Difference between VSD, VFD, ASD, AFD

The most correct term - according to IEEE and IEC - is ASD (Adjustable Speed Drive). This refers to the electronic equipment used to regulate the operating speed of the motor and driven equipment by controlling the frequency and voltage applied to the motor.
NOTE that other terms in common use include (but are not limited to): VSD (Variable Speed Drive), AFD (Adjustable Frequency Drive), and VFD (Variable Frequency Drive), they are referring to the same motor drives, just different names.
There is no difference between a VSD and VFD in terms of what it is designed to do. There MAY be differences based on specific internal components/construction and how it achieves that goal.

VFD Analog Input 0-10V Frequency Control (VI Port)

In this video, the ATO GK3000 inverter uses external voltage analog quantity to control the frequency, thereby achieving the purpose of motor speed regulation.

VFD Programming for Stabilizing Water Pressure in Water Supply System

In this video, we explore how to use ATO's VFD to ensure stable water pressure in your water supply system. We have covered the complete process from wiring, parameter setting and test run.

VFD Frequency Setting to 400Hz

In this video we show you a step-by-step guide on how to set the frequency of ATO's GK3000 VFD to 400Hz.

VFD Basic Troubleshooting Guide

In this video, ATO will show you the vfd basic troubleshooting guide.

4-20mA is as common in analog control systems as 0~10V, and ATO GK3000 series VFDs are also perfectly compatible.

Product reviews
Recommend a suitable VFD
5
Lucas
Avatar
6/8/2021 12:06 AM
We are looking for single phase input and output VSD for single phase fan 230VAC, 0.4kW. Could you please advice.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, recommended drive model: GK3000-1S000, 1 hp (0.75 kW) power capacity.
Do you provide reactors for 1-phase VFD?
5
Jubil
Avatar
11/24/2021 2:19 AM
We are looking forward to using your 1-phase VFD for a wall pump application. The pump motor will be about 180 meters from the VFD and your VFD manual says to use line reactors if the motor is more than 100 meters away. Please advise if you provide reactors for 1-phase.
VFD.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we provide, and usually when the distance between the VFD and the motor is more than 100m, a reactor is required to be installed at the output.
5kW Aircon Application
5
Marc
Avatar
8/21/2022 11:30 PM
Here's my problem; I bought a 5 kW 220V aircon which is 3 phase but the power provision is single phase; Can I use VFD for converting single phase into 3 phase? Any recommendation or suggestion is highly appreciated. thanks
Was this review helpful? Yes No (0/0)
ATO Responded
Yes. 7.5 hp VFD meets your application.
What VFD settings do I need to change?
5
sera
Avatar
6/13/2023 8:07 PM
Okay. Installed new gk3000, it ran the compressor and built up 150 lbs when pressure drop and try to restart got error E03 ?
What settings do I need to change?
Was this review helpful? Yes No (0/0)
ATO Responded
When error E03 occurs, is it started with load or no load?
Will it report error E03 if it runs without load?
What is your starting current?
The compressor has a set of start-stop loading logic.
If the loading logic does not cooperate well with the inverter, it will fail.
Please check the start-stop loading logic of the compressor.
Hope my explanation is able to assist you.
Look forward to your reply.
Please check what is the VFD starting current?
5
ronnie
Avatar
6/13/2023 9:22 PM
Please check what is the starting current?
Are you starting the compressor on no load or on load?
Was this review helpful? Yes No (0/0)
ATO Responded
Please check what is the starting current?
Are you starting the compressor on no load or on load?
Do I need a bigger VFD?
5
Glack
Avatar
8/2/2023 12:46 AM
The VFD does not seem capable of running the motor & pump. I tried increasing the acceleration time to 10 seconds and increased the torque percent to 20%, but it doesn't help. Please advise do I need a bigger VFD?
Was this review helpful? Yes No (0/0)
ATO Responded
We believe that this situation is due to the instantaneous overcurrent of the motor starting. Please follow the steps below to test again: Your motor wiring is three-phase 220V/440V, three-phase 230V/460V, please confirm whether your motor wiring is connected according to three-phase 220V or three-phase 230V? Please refer to the motor manual and double check the wiring of the motor.
Please recommend a suitable VFD
4
hi
Avatar
8/3/2024 11:05 PM
I have a 220v 3 phase 5hp table saw at high rpm but only have a 220 single phase main power. I usually cut 4x4 or 2x6' lumber and would like to know hat VFD will be enough to handle my application. Thank you.
Was this review helpful? Yes No (0/0)
ATO Responded
Please send us a picture of your 5HP table saw nameplate label to sales (at) ato.com, and they will confirm the appropriate VFD model for you.
Wiring gauge and breaker size
5
Lewis
Avatar
3/29/2026 6:51 AM
I’m using this VFD (recommended by your company) to run a 3phase 5HP radial arm saw.
What gauge wire and breaker do I need for approximately 50 foot run from breaker box? I’m going to use 220V power.
Was this review helpful? Yes No (0/0)
ATO Responded
Here are our configuration recommendations:
Breaker Size: We recommend a 40-Amp 2-Pole Breaker.
Wire Size: From the distribution box to the inverter, we recommend 8AWG (approximately 10 mm²) pure copper wire.
Configuration Notes: Your 5 HP (approximately 3.7kW) three-phase 220V motor will draw approximately 15A at full load.
Since you are using a single-phase to three-phase inverter, the current at the single-phase input will be higher, approximately 25A-28A at full load.
To comply with electrical safety regulations and to allow sufficient margin for equipment startup (typically 1.25 times the full load current), a 40A or higher circuit breaker is a reasonable choice. 8 AWG copper wire can safely carry 40A of current.
A distance of 50 feet is relatively short; the voltage drop when using 8AWG wire is less than 1%, which will not affect equipment performance.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Single phase 7.5 hp VFD, single phase 220V to three phase variable frequency drive, 28 amps. Using it as a phase converter to convert 1-phase 220v (230v, 240v) home power supply to drive 3-phase motors.

Specification:

BasicsModelGK3000-2S0055G
Capacity7.5 hp (5.5 kW)
Shipping weight8 kg
Dimension330*200*200 mm
I/O FeatureRated current28 A
Input voltage1 phase 220~240V AC
Input frequency50Hz/ 60Hz
Output voltage3 phase AC 0~input voltage
Output frequency0Hz~1000Hz
Over load capacity150% of rated current for 1 minute, 180% of rated current for 3 seconds
Control FeatureControl modeV/F, Sensorless vector control (SVC), Speed sensor vector control (FVC)
CommunicationRS485
Speed regulation1:100
Start torque150% of rating torque at 1 Hz
Speed control accuracy≤±0.5% of rating synchronous speed
Frequency precisionDigital setting: max frequency x± 0.01%;
Analog setting: max frequency x± 0.2%
Frequency resolutionAnalog setting: 0.1% of max frequency;
Digital setting: 0.01Hz
Torque boostAutomatic torque boost, manual torque boost 0.1%~30.0%
Interior PID controllerBe convenient to make closed-loop system
Automatic energy save runningOptimize V/F curve automatically based on the load to realize power save running
Automatic voltage regulation (AVR)Can keep constant output voltage when power source voltage varies.
Automatic current limitingLimit running current automatically to avoid frequent over-current which will cause trip
EnvironmentEnclosure ratingIP 20
Temperature–10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5%
Humidity5%-95%, without condensation
Altitude≤1000m; VFD will be derated if above 1000m
Impingement and oscillationNormal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g)
Store environment–20℃~ +60℃; no dust, no corrosive gas, no direct sunlight

Note: ATO VFD Cannot be used as a power source, it Can only be directly connected to an induction motor to control the motor speed.

Details

7.5 hp Single Phase to Three Phase VFD Details

Tips: Difference between VSD, VFD, ASD, AFD

The most correct term - according to IEEE and IEC - is ASD (Adjustable Speed Drive). This refers to the electronic equipment used to regulate the operating speed of the motor and driven equipment by controlling the frequency and voltage applied to the motor.
NOTE that other terms in common use include (but are not limited to): VSD (Variable Speed Drive), AFD (Adjustable Frequency Drive), and VFD (Variable Frequency Drive), they are referring to the same motor drives, just different names.
There is no difference between a VSD and VFD in terms of what it is designed to do. There MAY be differences based on specific internal components/construction and how it achieves that goal.

Product reviews
Recommend a suitable VFD
5
Lucas
Avatar
6/8/2021 12:06 AM
We are looking for single phase input and output VSD for single phase fan 230VAC, 0.4kW. Could you please advice.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, recommended drive model: GK3000-1S000, 1 hp (0.75 kW) power capacity.
Do you provide reactors for 1-phase VFD?
5
Jubil
Avatar
11/24/2021 2:19 AM
We are looking forward to using your 1-phase VFD for a wall pump application. The pump motor will be about 180 meters from the VFD and your VFD manual says to use line reactors if the motor is more than 100 meters away. Please advise if you provide reactors for 1-phase.
VFD.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we provide, and usually when the distance between the VFD and the motor is more than 100m, a reactor is required to be installed at the output.
5kW Aircon Application
5
Marc
Avatar
8/21/2022 11:30 PM
Here's my problem; I bought a 5 kW 220V aircon which is 3 phase but the power provision is single phase; Can I use VFD for converting single phase into 3 phase? Any recommendation or suggestion is highly appreciated. thanks
Was this review helpful? Yes No (0/0)
ATO Responded
Yes. 7.5 hp VFD meets your application.
What VFD settings do I need to change?
5
sera
Avatar
6/13/2023 8:07 PM
Okay. Installed new gk3000, it ran the compressor and built up 150 lbs when pressure drop and try to restart got error E03 ?
What settings do I need to change?
Was this review helpful? Yes No (0/0)
ATO Responded
When error E03 occurs, is it started with load or no load?
Will it report error E03 if it runs without load?
What is your starting current?
The compressor has a set of start-stop loading logic.
If the loading logic does not cooperate well with the inverter, it will fail.
Please check the start-stop loading logic of the compressor.
Hope my explanation is able to assist you.
Look forward to your reply.
Please check what is the VFD starting current?
5
ronnie
Avatar
6/13/2023 9:22 PM
Please check what is the starting current?
Are you starting the compressor on no load or on load?
Was this review helpful? Yes No (0/0)
ATO Responded
Please check what is the starting current?
Are you starting the compressor on no load or on load?
Do I need a bigger VFD?
5
Glack
Avatar
8/2/2023 12:46 AM
The VFD does not seem capable of running the motor & pump. I tried increasing the acceleration time to 10 seconds and increased the torque percent to 20%, but it doesn't help. Please advise do I need a bigger VFD?
Was this review helpful? Yes No (0/0)
ATO Responded
We believe that this situation is due to the instantaneous overcurrent of the motor starting. Please follow the steps below to test again: Your motor wiring is three-phase 220V/440V, three-phase 230V/460V, please confirm whether your motor wiring is connected according to three-phase 220V or three-phase 230V? Please refer to the motor manual and double check the wiring of the motor.
Please recommend a suitable VFD
4
hi
Avatar
8/3/2024 11:05 PM
I have a 220v 3 phase 5hp table saw at high rpm but only have a 220 single phase main power. I usually cut 4x4 or 2x6' lumber and would like to know hat VFD will be enough to handle my application. Thank you.
Was this review helpful? Yes No (0/0)
ATO Responded
Please send us a picture of your 5HP table saw nameplate label to sales (at) ato.com, and they will confirm the appropriate VFD model for you.
Wiring gauge and breaker size
5
Lewis
Avatar
3/29/2026 6:51 AM
I’m using this VFD (recommended by your company) to run a 3phase 5HP radial arm saw.
What gauge wire and breaker do I need for approximately 50 foot run from breaker box? I’m going to use 220V power.
Was this review helpful? Yes No (0/0)
ATO Responded
Here are our configuration recommendations:
Breaker Size: We recommend a 40-Amp 2-Pole Breaker.
Wire Size: From the distribution box to the inverter, we recommend 8AWG (approximately 10 mm²) pure copper wire.
Configuration Notes: Your 5 HP (approximately 3.7kW) three-phase 220V motor will draw approximately 15A at full load.
Since you are using a single-phase to three-phase inverter, the current at the single-phase input will be higher, approximately 25A-28A at full load.
To comply with electrical safety regulations and to allow sufficient margin for equipment startup (typically 1.25 times the full load current), a 40A or higher circuit breaker is a reasonable choice. 8 AWG copper wire can safely carry 40A of current.
A distance of 50 feet is relatively short; the voltage drop when using 8AWG wire is less than 1%, which will not affect equipment performance.
Only registered users can write reviews
Customers who bought this item also bought

10 hp VFD, Single Phase to Three Phase VFD

GK3000-2S0075G
$992.18
Customize 10 hp VFD with single phase input to three phase output. Using it as a phase converter for single phase power supply to vary three phase motor speed.

1 hp VFD, Single Phase to Three Phase VFD

GK3000-2S0007
$159.32
1 hp VFD, convert single phase to three phase for AC motor speed controls, IP20, RS485 enabled, shipping weight 2kg, manufacturer direct sale.

3 hp VFD, Single Phase to Three Phase VFD

GK3000-2S0022
$238.14
Low price 3hp VFD, convert 220V/230V/240V 1 phase to 3 phase, 9.6 amps, RS485 enabled, shipping weight 3kg, manufacturer direct sale.

5 hp VFD, Single Phase to Three Phase VFD

GK3000-2S0037
$294.31
5hp variable frequency drive, single phase to three phase VFD, 17 amps, RS485 enabled, shipping weight 4kg, manufacturer direct sale.

2 hp VFD, Single Phase to Three Phase VFD

GK3000-2S0015
$183.16
2 hp VFD, convert single phase to three phase for AC motor speed controls, 7 amps, IP20, RS485 enabled, manufacturer direct sale.