1500 W DC Worm Gear Motor, 36V/48V

$978.32
Buy 1500 W DC worm gear motor for electric car, renewable energy systems and industrial equipment, works with 2000 rpm high speed and 4.78N·m rated torque, selectable 36V or 48V power supply, gear ratio from 7.5:1 to 100:1.
SKU: ATO-GEAR-W1500
*
*
Free Shipping
Delivery date: 6-25 days

1500 W (2 hp) 3 phase BLDC motor is equipped with worm gearbox providing high speed and high torque at 36V or 48V power supply. The power, voltage, speed, shaft, motor length and lead can be customized.

Specification

Motor ModelATOD110BLD1500-36AATOD110BLD1500-48A
Motor TypeBLDC Motor
Power1500W
Voltage36V DC48V DC
Rated Current52.08A39.06A
No Load Current<20A<15A
No Load Speed2700 rpm
Rated Speed2000 rpm
Rated Torque4.78N·m
Peak Torque14.34N·m
Motor Dimension110mm
Shaft Diameter11mm
ConstructionPermanent Magnet
Direction of RotationCW/CCW
CertificateCCC, CE, ROSH, LVD, EMC
Gear Ratio7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100
Recommended Drive ModelATO-BD100ATO-BD100
What Parameters of ATO Worm Gear Motors Can Be Customized?
PowerYes
VoltageYes
SpeedYes
ShaftYes
Motor LengthYes
Motor LeadYes

Allowable Torque with Gear Head

Gear Ratio7.5101520253040506080100
Rated Output Speed (rpm)26720013310080675040332520
Rated Output Torque (Nm)43.057.386.0111.7136.1159.0200.6177.0200.0180.0139.0

Note:

  • This torque value is the rated output value of the reducer, not the final motor + output torque value T after reducer.
  • The formula for calculating the output torque after the final motor + reducer: T = rated torque of the motor * reduction ratio * 0.6, and T≤ rated allowable output torque value of the reducer.

Dimensions (Unit: mm)

Mounting screws are included with gearhead

Dimensions of 1500 W DC Worm Gear Motor

Speed-Torque Curve

1500 W DC Worm Gear Motor Speed Torque Curve

  • Instantaneous maximum torque line
    The maximum torque momentarily impacts the load when the motor is started.
    Beyond this torque, the over-current protection of the driver will cause the motor to stop.
  • Short time operation area
    The motor can run at a short time within this torque range at different speeds.
    If the operation time is too long, the motor will generate heat, which may cause the motor to stop or burn.
  • Rated operating torque line
    The rated torque of motor running at different speeds, and the motor can run for a long time at this torque.
  • Continuous operating area
    When the motor rotates at different speeds, it runs continuously in this corresponding zone.

Details

1500W DC Worm Gear Motor Details

Tips: How to prevent the generation of brush sparks in a worm gear motor

  1. The commutation pole can be installed, which is offset by the potential of the commutation pole.
  2. The brush should be selected reasonably, the contact resistance between the brush and the surface of the commutator should be as large as possible, and the wear resistance of the brush should be good.
  3. The pressure of the brush should be adjusted well. If the pressure is too tight, it will aggravate the wear of the brush and commutator. However, if the pressure is too loose, the contact between the brush and the commutator will be poor, which will cause some problems. The inner surface of the brush holder box should be smooth and flat, without burrs and other problems, and the inner hole roughness should be less than 2um.
  4. The material and model of the brush should be choosen correctly, which is generally determined according to the operating conditions of the generator.
  5. The number of positive and negative brushes should be equal, and during the installation process, the brush distance between the brushes should be equal, and the contact between the brushes and the collector ring should be good.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
Great! Just what I wanted.
5
Mesnard
Avatar
4/14/2022 7:37 PM
This 1500W DC worm gear motor works great with a BLDC motor speed controller for my machine. It will run at any speed from zero to full speed with no glitches. Can recommend for industrial applications and in areas where you need to be able to fit a super reliable unit such as this.
Was this review helpful? Yes No (0/0)
High Power Output
5
Lucien
Avatar
9/19/2023 3:17 AM
This motor has a power output of 1500 watts, making it powerful and suitable for applications that require high torque and power. This makes it ideal for driving heavy machinery or equipment.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

1500 W (2 hp) 3 phase BLDC motor is equipped with worm gearbox providing high speed and high torque at 36V or 48V power supply. The power, voltage, speed, shaft, motor length and lead can be customized.

Specification

Motor ModelATOD110BLD1500-36AATOD110BLD1500-48A
Motor TypeBLDC Motor
Power1500W
Voltage36V DC48V DC
Rated Current52.08A39.06A
No Load Current<20A<15A
No Load Speed2700 rpm
Rated Speed2000 rpm
Rated Torque4.78N·m
Peak Torque14.34N·m
Motor Dimension110mm
Shaft Diameter11mm
ConstructionPermanent Magnet
Direction of RotationCW/CCW
CertificateCCC, CE, ROSH, LVD, EMC
Gear Ratio7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100
Recommended Drive ModelATO-BD100ATO-BD100
What Parameters of ATO Worm Gear Motors Can Be Customized?
PowerYes
VoltageYes
SpeedYes
ShaftYes
Motor LengthYes
Motor LeadYes

Allowable Torque with Gear Head

Gear Ratio7.5101520253040506080100
Rated Output Speed (rpm)26720013310080675040332520
Rated Output Torque (Nm)43.057.386.0111.7136.1159.0200.6177.0200.0180.0139.0

Note:

  • This torque value is the rated output value of the reducer, not the final motor + output torque value T after reducer.
  • The formula for calculating the output torque after the final motor + reducer: T = rated torque of the motor * reduction ratio * 0.6, and T≤ rated allowable output torque value of the reducer.

Dimensions (Unit: mm)

Mounting screws are included with gearhead

Dimensions of 1500 W DC Worm Gear Motor

Speed-Torque Curve

1500 W DC Worm Gear Motor Speed Torque Curve

  • Instantaneous maximum torque line
    The maximum torque momentarily impacts the load when the motor is started.
    Beyond this torque, the over-current protection of the driver will cause the motor to stop.
  • Short time operation area
    The motor can run at a short time within this torque range at different speeds.
    If the operation time is too long, the motor will generate heat, which may cause the motor to stop or burn.
  • Rated operating torque line
    The rated torque of motor running at different speeds, and the motor can run for a long time at this torque.
  • Continuous operating area
    When the motor rotates at different speeds, it runs continuously in this corresponding zone.

Details

1500W DC Worm Gear Motor Details

Tips: How to prevent the generation of brush sparks in a worm gear motor

  1. The commutation pole can be installed, which is offset by the potential of the commutation pole.
  2. The brush should be selected reasonably, the contact resistance between the brush and the surface of the commutator should be as large as possible, and the wear resistance of the brush should be good.
  3. The pressure of the brush should be adjusted well. If the pressure is too tight, it will aggravate the wear of the brush and commutator. However, if the pressure is too loose, the contact between the brush and the commutator will be poor, which will cause some problems. The inner surface of the brush holder box should be smooth and flat, without burrs and other problems, and the inner hole roughness should be less than 2um.
  4. The material and model of the brush should be choosen correctly, which is generally determined according to the operating conditions of the generator.
  5. The number of positive and negative brushes should be equal, and during the installation process, the brush distance between the brushes should be equal, and the contact between the brushes and the collector ring should be good.
Product reviews
Great! Just what I wanted.
5
Mesnard
Avatar
4/14/2022 7:37 PM
This 1500W DC worm gear motor works great with a BLDC motor speed controller for my machine. It will run at any speed from zero to full speed with no glitches. Can recommend for industrial applications and in areas where you need to be able to fit a super reliable unit such as this.
Was this review helpful? Yes No (0/0)
High Power Output
5
Lucien
Avatar
9/19/2023 3:17 AM
This motor has a power output of 1500 watts, making it powerful and suitable for applications that require high torque and power. This makes it ideal for driving heavy machinery or equipment.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

600 W DC Worm Gear Motor, 24V/48V

ATO-GEAR-W600
$759.88
High torque 600 W DC worm gear motor with gear ratio from 7.5:1 to 100:1, provides 2000 rpm rated speed at 24V, 36V or 48V, rated torque at 1.91N·m and peak torque at 5.73N·m. This BLDC gear motor is easy for speed adjustment and reversible direction.