470μF 16V SMD Electrolytic Capacitor

$1.58
Lower cost SMD electrolytic capacitor for sale online. SMD aluminum electrolytic capacitor with 470μF capacity, 16V rated voltage, ±20% cap. tolerance, operating temperature is -55~105℃. Surface mount electrolytic capacitor with stable performance and high reliability and suitable for high density assembly.
SKU: ATO-EC-S470UF16V
This product has a minimum quantity of 100
Free Shipping
Delivery date: 6-12 days

High-performance SMD electrolytic capacitor has low ESR and high ripple current, 24% dissipation factor. SMD aluminum electrolytic capacitors usually play the electrical functions of filtering, bypassing, coupling, decoupling, and switching.

Features

  • Endurance: 105℃ - 2000 hours
  • Low ESR and high ripple current
  • Vibration-proof (vP) version (up to 30g) available upon request
  • AEC-Q200 version available
  • High voltage, automotive 105°C type

Specification

ModelATO-EC-HV471M
Capacity470㎌
Rated voltage16V
Size8*10.5 mm
Installation typeSurface mount
Operating temperature-55~105℃
Cap. tolerance (∆C)±20% (120Hz 20℃)
Dissipation factor (tanδ)24%
Low temperature characteristic at 120Hz (Z ratio max.)3 (Z-25℃/Z+20℃)
Leakage current (Lleak)≤0.01*CR*VR or 3 ㎂ * after 2 minutes
Enduarance (105℃)Test2000h
∆C≤20% of initial measured value
tanδ≤200% of specified measured value
Lleak≤ the specified measured value
Shelf life (105℃)Test1000h
∆C≤20% of initial measured value
tanδ≤200% of specified measured value
Lleak≤ the specified measured value
Resistance to soldering heat (105℃)∆CWithin ±10% of initial value
tanδLess than specified value
LleakLess than specified value

Dimension (mm)

SMD electrolytic capacitor dimension

ModelDimension (mm)
ATO-EC-HV471M∅D8
L10.5
aMax
A8.3
B8.3
C9
W0.7~1.1
P±23.1

Tips:  What is Electrolytic Capacitor?

SMD electrolytic capacitors are usually made of metal foil (aluminum/ tantalum) as the positive electrode, and the insulating oxide layer of the metal foil (alumina/ tantalum pentoxide) as the dielectric. Electrolytic capacitors are divided into aluminum electrolytic capacitors and Tantalum Electrolytic Capacitors. The negative electrode of aluminum electrolytic capacitors consists of thin paper/film or electrolyte polymer soaked in an electrolyte (liquid electrolyte); the negative electrode of tantalum electrolytic capacitors is usually manganese dioxide. Electrolytic capacitors get their name because they all use electrolytes as negative electrodes (note the distinction from dielectrics).

In this video, ATO will show you three phase parallel capacitors / self-healing.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

High-performance SMD electrolytic capacitor has low ESR and high ripple current, 24% dissipation factor. SMD aluminum electrolytic capacitors usually play the electrical functions of filtering, bypassing, coupling, decoupling, and switching.

Features

  • Endurance: 105℃ - 2000 hours
  • Low ESR and high ripple current
  • Vibration-proof (vP) version (up to 30g) available upon request
  • AEC-Q200 version available
  • High voltage, automotive 105°C type

Specification

ModelATO-EC-HV471M
Capacity470㎌
Rated voltage16V
Size8*10.5 mm
Installation typeSurface mount
Operating temperature-55~105℃
Cap. tolerance (∆C)±20% (120Hz 20℃)
Dissipation factor (tanδ)24%
Low temperature characteristic at 120Hz (Z ratio max.)3 (Z-25℃/Z+20℃)
Leakage current (Lleak)≤0.01*CR*VR or 3 ㎂ * after 2 minutes
Enduarance (105℃)Test2000h
∆C≤20% of initial measured value
tanδ≤200% of specified measured value
Lleak≤ the specified measured value
Shelf life (105℃)Test1000h
∆C≤20% of initial measured value
tanδ≤200% of specified measured value
Lleak≤ the specified measured value
Resistance to soldering heat (105℃)∆CWithin ±10% of initial value
tanδLess than specified value
LleakLess than specified value

Dimension (mm)

SMD electrolytic capacitor dimension

ModelDimension (mm)
ATO-EC-HV471M∅D8
L10.5
aMax
A8.3
B8.3
C9
W0.7~1.1
P±23.1

Tips:  What is Electrolytic Capacitor?

SMD electrolytic capacitors are usually made of metal foil (aluminum/ tantalum) as the positive electrode, and the insulating oxide layer of the metal foil (alumina/ tantalum pentoxide) as the dielectric. Electrolytic capacitors are divided into aluminum electrolytic capacitors and Tantalum Electrolytic Capacitors. The negative electrode of aluminum electrolytic capacitors consists of thin paper/film or electrolyte polymer soaked in an electrolyte (liquid electrolyte); the negative electrode of tantalum electrolytic capacitors is usually manganese dioxide. Electrolytic capacitors get their name because they all use electrolytes as negative electrodes (note the distinction from dielectrics).

Only registered users can write reviews