100μF 50V SMD Electrolytic Capacitor

$1.62
100μF SMD aluminum electrolytic capacitor with rated voltage 50V, surface mount installation type, ±20% cap. tolerance, 14% dissipation factor. Aluminum electrolytic capacitor capacitor with stable performance and high reliability, suitable for high density assembly.
SKU: ATO-EC-S100UF50V
This product has a minimum quantity of 100
Free Shipping
Delivery date: 6-12 days

Surface mount electrolytic capacitor provides 100μF capacity, -55~105℃ operating temperature, 2000h endurance. SMD aluminum electrolytic capacitor can be applied for air conditioners, tape recorders, washing machines, communication machines and other household appliances.

Features

  • Endurance: 105℃ - 2000 hours
  • Low ESR and high ripple current
  • Vibration-proof (vP) version (up to 30g) available upon request
  • AEC-Q200 version available
  • High voltage, automotive 105°C type

Specification

ModelATO-EC-HV101M050G
Capacity220㎌
Rated voltage50V
Size10*10.5mm
Installation typeSurface mount
Operating temperature-55~105℃
Cap. tolerance (∆C)±20% (120Hz 20℃)
Dissipation factor (tanδ)14%
Low temperature characteristic at 120Hz (Z ratio max.)3 (Z-25℃/Z+20℃)
Leakage current (Lleak)≤0.01*CR*VR or 3 ㎂ * after 2 minutes
Enduarance (105℃)Test2000h
∆C≤20% of initial measured value
tanδ≤200% of specified measured value
Lleak≤ the specified measured value
Shelf life (105℃)Test1000h
∆C≤20% of initial measured value
tanδ≤200% of specified measured value
Lleak≤ the specified measured value
Resistance to soldering heat (105℃)∆CWithin ±10% of initial value
tanδLess than specified value
LleakLess than specified value

Dimension (mm)

SMD electrolytic capacitor dimension

ModelDimension (mm)
ATO-EC-HV101M050G∅D10
L10.5
aMax
A10.3
B10.3
C11
W0.7~1.1
P±24.5

Tips: How to judge the positive and negative electrodes of SMD aluminum electrolytic capacitor?

The positive and negative poles of the SMD aluminum electrolytic capacitor are distinguished and measured, and the black block with the mark on the capacitor is the negative pole. There are two semi-circles on the capacitor position on the PCB. The colored semi-circle corresponds to the negative electrode, or the length of the pin is used to distinguish the positive and negative electrodes. The long leg is positive and the short leg is negative.

When you don't know the positive and negative poles of the capacitor, you can use a multimeter to measure it. The medium between the two poles of the capacitor is not an absolute insulator, and its resistance is not infinite, but a finite value, generally above 1000 megohms.

In this video, ATO will show you three phase parallel capacitors / self-healing.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Surface mount electrolytic capacitor provides 100μF capacity, -55~105℃ operating temperature, 2000h endurance. SMD aluminum electrolytic capacitor can be applied for air conditioners, tape recorders, washing machines, communication machines and other household appliances.

Features

  • Endurance: 105℃ - 2000 hours
  • Low ESR and high ripple current
  • Vibration-proof (vP) version (up to 30g) available upon request
  • AEC-Q200 version available
  • High voltage, automotive 105°C type

Specification

ModelATO-EC-HV101M050G
Capacity220㎌
Rated voltage50V
Size10*10.5mm
Installation typeSurface mount
Operating temperature-55~105℃
Cap. tolerance (∆C)±20% (120Hz 20℃)
Dissipation factor (tanδ)14%
Low temperature characteristic at 120Hz (Z ratio max.)3 (Z-25℃/Z+20℃)
Leakage current (Lleak)≤0.01*CR*VR or 3 ㎂ * after 2 minutes
Enduarance (105℃)Test2000h
∆C≤20% of initial measured value
tanδ≤200% of specified measured value
Lleak≤ the specified measured value
Shelf life (105℃)Test1000h
∆C≤20% of initial measured value
tanδ≤200% of specified measured value
Lleak≤ the specified measured value
Resistance to soldering heat (105℃)∆CWithin ±10% of initial value
tanδLess than specified value
LleakLess than specified value

Dimension (mm)

SMD electrolytic capacitor dimension

ModelDimension (mm)
ATO-EC-HV101M050G∅D10
L10.5
aMax
A10.3
B10.3
C11
W0.7~1.1
P±24.5

Tips: How to judge the positive and negative electrodes of SMD aluminum electrolytic capacitor?

The positive and negative poles of the SMD aluminum electrolytic capacitor are distinguished and measured, and the black block with the mark on the capacitor is the negative pole. There are two semi-circles on the capacitor position on the PCB. The colored semi-circle corresponds to the negative electrode, or the length of the pin is used to distinguish the positive and negative electrodes. The long leg is positive and the short leg is negative.

When you don't know the positive and negative poles of the capacitor, you can use a multimeter to measure it. The medium between the two poles of the capacitor is not an absolute insulator, and its resistance is not infinite, but a finite value, generally above 1000 megohms.

Only registered users can write reviews