Get a SMD electrolytic capacitor at reasonable price. Surface mount electrolytic capacitor featuring 33μF capacity, 1000h shelf life, -55~105℃ operating temperature.
Features
- Endurance: 105℃ - 2000 hours
- Low ESR and high ripple current
- Vibration-proof (vP) version (up to 30g) available upon request
- AEC-Q200 version available
- High voltage, automotive 105°C type
Specification
| Model | ATO-EC-HV330M035 | |
| Capacity | 33㎌ | |
| Rated voltage | 35V | |
| Size | 6.3*5.5mm | |
| Installation type | Surface mount | |
| Operating temperature | -55~105℃ | |
| Cap. tolerance (∆C) | ±20% (120Hz 20℃) | |
| Dissipation factor (tanδ) | 14% | |
| Low temperature characteristic at 120Hz (Z ratio max.) | 3 (Z-25℃/Z+20℃) | |
| Leakage current (Lleak) | ≤0.01*CR*VR or 3 ㎂ * after 2 minutes | |
| Enduarance (105℃) | Test | 2000h |
| ∆C | ≤20% of initial measured value | |
| tanδ | ≤200% of specified measured value | |
| Lleak | ≤ the specified measured value | |
| Shelf life (105℃) | Test | 1000h |
| ∆C | ≤20% of initial measured value | |
| tanδ | ≤200% of specified measured value | |
| Lleak | ≤ the specified measured value | |
| Resistance to soldering heat (105℃) | ∆C | Within ±10% of initial value |
| tanδ | Less than specified value | |
| Lleak | Less than specified value | |
Dimension (mm)

| Model | Dimension (mm) | |
| ATO-EC-HV330M035 | ∅D | 6.3 |
| L | 5.5 | |
| a | 0.2 | |
| A | 6.6 | |
| B | 6.6 | |
| C | 7.2 | |
| W | 0.5~0.8 | |
| P±2 | 2.2 | |
Tips: Reflow Soldering Conditions of SMD Electrolytic Capacitor.
Reflow soldering is suitable for SMD aluminum electrolytic capacitors. Reflow Soldering Conditions:
- Infrared or hot air reflow soldering should be used instead of vapor phase heating reflow soldering.
- The number of reflow soldering is up to 2 times, please ensure that the product has sufficient cooling time between the first and second times.
- The preheating time from 150C to 200C is within 180 seconds: the soldering time of the capacitor top temperature exceeding 217C shall not exceed tL (seconds); the peak temperature of the capacitor top shall not be better than TP (C), the actual peak value in the range of 5C temperature time must not exceed tp (seconds).
- The average temperature rise is at most 3C per second.
- Temperature drop averages up to 6C per second.
- Up to 8 minutes from 25C to peak temperature.
Only registered users can write reviews