ATO ASW400 reversing contactor is used to change the direction of rotation in alternating current motors, start them gently and to monitor their load. Widely used in auto electric winch, telecommunication equiment, engineering machinery and other electric control system.
Features
- 400 amps rated load current of contact circuit.
- 2NO and 2NC contact form.
- 12V, 24V, 48V DC coil rated voltage for selection.
- Main contact voltage drop at 100A, not above 100mV.
- Mechanical life up to 300 thousand times.
400A DC Reversing Contactor Specifications
| Basics | Model | ATO-ASW400-2Z |
| Body Size | 51*114*160 mm | |
| Weight | 3150 g | |
| Technical Parameters | Coil Rated Voltage | 12V/24V/48V |
| Rated Load Voltage | 12~60V DC | |
| Contact Circuit Rated Load Current | 400 A | |
| Contact Form | 2NO and 2NC | |
| Overload Current | ≤7 le | |
| Coil Power | ≤24 W | |
| Main Contact Voltage Drop at 100A Load | ≤100 mV | |
| The Allowed Range of Coil Voltage | ±20% | |
| Pull-In Time (N/O Contacts to Open) | ≤30 ms | |
| Drop-Out Time (N/O Contact to Close) | ≤20 ms | |
| Insulation Resistance | ≥50 MΩ | |
| Dielectric Withstanding Voltage | 50Hz/60Hz 1000VAC/Min | |
| Auxiliary Contact Rated Load (Option) | 2A/48VDC, 5A/24VDC | |
| Electric Life | Continuous 20000 times | |
| Mechanical Life | 300 thousand times | |
| Environment | Environmental Proctection | IP 50 |
| Operating Temperature | -25℃~55℃ | |
| Operating Humidity | 5~95% RH |
DC Reversing Contactor Circuit Diagram
Installation Diagram (Unit: mm)

Details

Tips: Reasons for the contacts of contactor being unable to separate after powering off
- Control line of the coil is too long, the residual voltage is too large due to the influence of lead capacitance, which is enough to maintain a close situation for the iron core. As a result, the contacts can't be separated.
- Coil of the contactor has burnt out, deformed coil skeleton seizes the movable iron core, which makes it unable to move, thus the contacts can't be separated.
- The contact has been fused.
- The contactor has auto-lock function, and the function is normal.
Product reviews
Best price, work perfectly
Stephen
5/21/2018 7:54 PM
I purchased three of these contacors, they work perfectly for my projects. Best price as well, will buy again as needed.
Was this review helpful? (0/0)
Very impressed with the quality of this 400 amp dc contactor
Arlo Hopkins
10/9/2018 7:24 PM
Very impressed with the quality of this 400 amp dc contactor. It easy to use and dose not take up much room, has lasted a long time with no problems.
Was this review helpful? (0/0)
400A DC reversing contactor worked fine
Darel Palm
11/27/2018 2:02 AM
The DC reversing contactor worked fine, but after replacing it, my winch still didn't work. Found out it was corroded battery terminals that was causing the problem. Cleaned them up and it worked. Only complaint would be that it is a little pricey.
Was this review helpful? (0/0)
Only registered users can write reviews
Customers who bought this item also bought
200A DC Reversing Contactor, 2 pole, 12V/24V/48V
ATO-DCCON-R200
$164.46
Contact circuit rated current 200 amps, 2 pole DC contactor with 12V/24V/48V coil for choice, DPST-NO, DPST-NC contact form, two interlocked contacts are designed to prevent the motor from running forwards and backwards simultaneously.
DC-DC Buck Converter, 24V to 12V
ATO-DCDC-2412
$102.58
24V to 12V mini DC-DC buck converter series is a compact size high reliability power converter with low price. This buck module features wide input voltage 18V to 36V, wide range power from 18 watts to 1200 watts, low power consumption. Industry grade step down converter, efficiency up to 97%.