3 kVA three phase solid state (static) frequency converter, converting 50 Hz to 60 Hz, 400 Hz adjustable, compatible with 3 phase 220V - 240V, 380V, 400V - 480V power system, 3-phase or 1-phase output.
Specification:
| Model | HZ-50-3303 | |
| Capacity | 3 kVA | |
| Dimension | 680 (D)*500 (W)*970 (H) mm | |
| Weight | 120 kg | |
| Input | Voltage | 3 Phase 4 Wire: Wye Type 190/110, 200/115, 208/120, 220/128, 230/132, 240/139V ±10% (option *) |
| 3 Phase 4 Wire: Wye Type 380/220, 400/230, 415/240, 440/254, 460/265, 480/277V ± 10% (option *) | ||
| 3 Phase 4 Wire: Della Type 220, 230, 240, 380, 400, 415, 440V ± 10% (option *) | ||
| Frequency | 50 Hz, 60 Hz | |
| Output | Voltage, current | 110V Setting (Low grade): 0-150V (phase voltage), 0-260V (line voltage) 8.4A |
| 220V Setting (High grade): 0-300V (phase voltage), 0-520V (line voltage) 4.2A | ||
| Load stabilization Rate | ≤±1% | |
| Frequency | 50Hz, 60Hz up to 400Hz adjustable Note: -When the output is 400Hz, the load capacity can only reach 50% of the rated capacity. -When the output is ≤120Hz, the load capacity can reach 100% of the rated value. -You can just adjust converter output frequency in the range (40-400Hz) for 400Hz option. | |
| Frequency Stability | ≤±0.01% | |
| Harmonic Distortion | Pure Sine Wave ≤2% | |
| Frequency meter | 4 digit, digital frequency meter, resolution 0.1Hz/Step | |
| Voltmeter | 4 digit, digital voltage meter, resolution 0.1V | |
| Ammeter | 4 digit, digital ammeter, resolution 0.1A | |
| Watt meter | 4 digit, digital Watt meter, resolution 0.1W | |
| Protection | With overload, short circuit, over temperature | |
| Instantaneous power failure protection and alarm device | ||
| Working Environment | Temperature | 0 - 40 deg.℃ |
| Humidity | 0 - 90% (Non condensation) | |
| Warranty | 18 months | |
Tips: Influence of 50Hz 60Hz exchange to resistive components
Most people usually believe that these components are simply one resistance. Connecting with both AC and DC currents can satisfy its lightening and heating functions. Its power can be satisfied through satisfying the voltage grade requirement. In fact, that is not the case. The lamp and heater are assimilated to regulated conductor(take roundness as an example). The theoretical current is evenly distributed in the conductor. When we supply AC current into it, because of the electromagnetic induction, the electromotive force impending current will be perceived in the conductor center. At this moment, the current tends to the outer ring and outer surface of the conductor. The distribution starts to become uneven. This is a “skin effect” phenomenon. Therefore, it is not hard to infer that, when the voltage is fixed, the frequency exchanges from 50 Hertz to 60 Hertz application, the induced electromotive force increases, the area of the conductor center ring enlarges, the active area of conductor current circulation decreases, the corresponding conductor resistance increases, the current reduces, and the power decreases.
Strictly speaking, it still affects the resistive element. It is sometimes that it does not took into account because the low voltage level does not affect its performance.
Input 3 phase 4 wire: Wye Type 380/220 50Hz
Output 3 phase 115/400Hz Wye (L1, L2, L3 N, G)
This instrument will not power motor only some power supplies
240v 1ph-50hz
380v-416v-50Hz 3 phase and (380 to 416 Volts is phase to phase) measurement is taken line to line. Please note it is three phase with a neutral though.
We must provide:
Rated current is 50amps with a nice to have of 60amps for the 380-416v range.
The 240v single phase would be under 25 amps.
Inrush current would be x2 rated current for 10ms.
We are a company based in Ireland and we have some machines to run with 60hz 120/208V.
Total current and Power we need: 75A and 20KW.
we are interested to buy a converter for this, what do you recommend ?