2 hp Non-Enclosure VFD, 1ph Input, 3ph Output

$161.55
High quality 2 hp (1.5 kW) single phase VFD without enclosure, 220-240v 1-phase input to 3ph output, built-in braking unit, V/F control, sensorless vector control, driving single and three phase AC motors.
SKU: GK3300-2S0015
Free Shipping
Delivery date: 6-12 days

Discounted 2 hp VFD, customized non-enclosure desgin, single phase input, 7.5 amps, brand new direct sale by manufacturer.

Specification:

BasicsModelGK3300-2S0015
Capacity2 hp (1.5 kW)
Shipping weight887 g
Dimension (L*W*H)150*98*114 mm
I/O FeatureRated current7.5 A
Input voltage1 phase 220~240V AC
Input frequency50Hz/ 60Hz
Output voltage3 phase AC 0~input voltage
Output frequency0Hz~1000Hz
Over load capacity150% of rated current for 1 minute, 180% of rated current for 3 seconds
Control FeatureControl modeV/F control;
Sensorless vector control;
CommunicationRS485
Speed regulation1:100
Start torque150% of rating torque at 1 Hz
Speed control accuracy≤±0.5% of rating synchronous speed
Frequency precisionDigital setting: max frequency x± 0.01%;
Analog setting: max frequency x± 0.2%
Frequency resolutionAnalog setting: 0.1% of max frequency;
Digital setting: 0.01Hz
Torque boostAutomatic torque boost, manual torque boost 0.1%~30.0%
Interior PID controllerBe convenient to make closed-loop system
Automatic energy save runningOptimize V/F curve automatically based on the load to realize power save running
Automatic voltage regulation (AVR)Can keep constant output voltage when power source voltage varies.
Automatic current limitingLimit running current automatically to avoid frequent over-current which will cause trip
EnvironmentEnclosure ratingIP 20
Temperature–10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5%
Humidity5%-95%, without condensation
Altitude≤1000m; VFD will be derated if above 1000m
Impingement and oscillationNormal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g)
Store environment–20℃~ +60℃; no dust, no corrosive gas, no direct sunlight

Note: ATO VFD Cannot be used as a power source, it Can only be directly connected to an induction motor to control the motor speed.

Tips: Whether the VFD is suitable for your application.
The main function of the variable frequency drive (VFD) is to change the speed of the AC motor. VFD also provides non-emergency start & stop control, acceleration, deceleration and overload protection. In addition, the frequency inverter can reduce the motor startup inrush current by gradually accelerating the motor. ATO VFD is suitable for machines such as conveyors, fans and pumps which benefit from reduced and controlled motor operating speeds.

This video includes three parts: 1. What is customized equipment? 2. Difference between non-enclosure and standard VFDs. 3. Pratical operation of ATO non-enclosure VFD. All above explains the features, functions and working of non-enclosure VFD.

In this video, ATO will show you the vfd basic troubleshooting guide.

This video will show you how to measure electrical circuit using digital multimeter.

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
High quality 2hp non-enclosure VFD
5
Dagobert
Avatar
3/23/2021 12:45 AM
In the case of a single phase input and output 2hp non-enclosure VFD, can you estimate the percentage of inrush current reduction?
Was this review helpful? Yes No (0/0)
ATO Responded
You can completely eliminate the influx by increasing the acceleration time.
The perfect VFD
5
Fenlon
Avatar
9/16/2021 7:29 PM
Hi, I am wiring a model GK3000-230037 and am wondering where to ground the 220V single phase input. Does it share the same ground as the 3 Phase output.
Was this review helpful? Yes No (0/0)
ATO Responded
Thanks for your email.
For 220V input, you can share the same ground as the 3 phase output(E).
Sure, if you connect to the ground system directly, that would be better.
Do you have any suggestions?
5
Karlson
Avatar
7/27/2022 1:28 AM
We do maintenance to railway products here in Sweden and need a way to test fan motors. The Swedish railway use 16.7Hz. The motors are 1ph (rejected by 99% of all VFDs). Looking through your products we find GK3300-2S0015 - which on paper looks like a good match for us (allowing us to run a 1ph, 16.7Hz, 220VAC, 0.5kW motor). We not wish to disconnect any capacitors or rewire the motors before testing... Do you have any suggestions?
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, we do not recommend using this item. Because we haven't tested a 16.7Hz motor with it before, we can't judge whether it can be used or not.
remote start stop
5
Kevin
Avatar
12/1/2023 3:59 PM
does this unit feature remote start stop from basic dry contacts?
Was this review helpful? Yes No (0/0)
ATO Responded
How far do you mean by remote control? Our VFD wired dry contact control distance is within 100m.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Discounted 2 hp VFD, customized non-enclosure desgin, single phase input, 7.5 amps, brand new direct sale by manufacturer.

Specification:

BasicsModelGK3300-2S0015
Capacity2 hp (1.5 kW)
Shipping weight887 g
Dimension (L*W*H)150*98*114 mm
I/O FeatureRated current7.5 A
Input voltage1 phase 220~240V AC
Input frequency50Hz/ 60Hz
Output voltage3 phase AC 0~input voltage
Output frequency0Hz~1000Hz
Over load capacity150% of rated current for 1 minute, 180% of rated current for 3 seconds
Control FeatureControl modeV/F control;
Sensorless vector control;
CommunicationRS485
Speed regulation1:100
Start torque150% of rating torque at 1 Hz
Speed control accuracy≤±0.5% of rating synchronous speed
Frequency precisionDigital setting: max frequency x± 0.01%;
Analog setting: max frequency x± 0.2%
Frequency resolutionAnalog setting: 0.1% of max frequency;
Digital setting: 0.01Hz
Torque boostAutomatic torque boost, manual torque boost 0.1%~30.0%
Interior PID controllerBe convenient to make closed-loop system
Automatic energy save runningOptimize V/F curve automatically based on the load to realize power save running
Automatic voltage regulation (AVR)Can keep constant output voltage when power source voltage varies.
Automatic current limitingLimit running current automatically to avoid frequent over-current which will cause trip
EnvironmentEnclosure ratingIP 20
Temperature–10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5%
Humidity5%-95%, without condensation
Altitude≤1000m; VFD will be derated if above 1000m
Impingement and oscillationNormal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g)
Store environment–20℃~ +60℃; no dust, no corrosive gas, no direct sunlight

Note: ATO VFD Cannot be used as a power source, it Can only be directly connected to an induction motor to control the motor speed.

Tips: Whether the VFD is suitable for your application.
The main function of the variable frequency drive (VFD) is to change the speed of the AC motor. VFD also provides non-emergency start & stop control, acceleration, deceleration and overload protection. In addition, the frequency inverter can reduce the motor startup inrush current by gradually accelerating the motor. ATO VFD is suitable for machines such as conveyors, fans and pumps which benefit from reduced and controlled motor operating speeds.

Product reviews
High quality 2hp non-enclosure VFD
5
Dagobert
Avatar
3/23/2021 12:45 AM
In the case of a single phase input and output 2hp non-enclosure VFD, can you estimate the percentage of inrush current reduction?
Was this review helpful? Yes No (0/0)
ATO Responded
You can completely eliminate the influx by increasing the acceleration time.
The perfect VFD
5
Fenlon
Avatar
9/16/2021 7:29 PM
Hi, I am wiring a model GK3000-230037 and am wondering where to ground the 220V single phase input. Does it share the same ground as the 3 Phase output.
Was this review helpful? Yes No (0/0)
ATO Responded
Thanks for your email.
For 220V input, you can share the same ground as the 3 phase output(E).
Sure, if you connect to the ground system directly, that would be better.
Do you have any suggestions?
5
Karlson
Avatar
7/27/2022 1:28 AM
We do maintenance to railway products here in Sweden and need a way to test fan motors. The Swedish railway use 16.7Hz. The motors are 1ph (rejected by 99% of all VFDs). Looking through your products we find GK3300-2S0015 - which on paper looks like a good match for us (allowing us to run a 1ph, 16.7Hz, 220VAC, 0.5kW motor). We not wish to disconnect any capacitors or rewire the motors before testing... Do you have any suggestions?
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, we do not recommend using this item. Because we haven't tested a 16.7Hz motor with it before, we can't judge whether it can be used or not.
remote start stop
5
Kevin
Avatar
12/1/2023 3:59 PM
does this unit feature remote start stop from basic dry contacts?
Was this review helpful? Yes No (0/0)
ATO Responded
How far do you mean by remote control? Our VFD wired dry contact control distance is within 100m.
Only registered users can write reviews
Customers who bought this item also bought

Pressure Sensor for Air/Water/Oil, 4-20mA/0-5V/RS485 Output

ATO-PRES-P300
$119.68
Silicon piezoresistive pressure sensor covers -0.1 to 100 MPa with 4–20mA, 0–20mA, multiple voltage or RS485 output options. Stainless steel construction supports air, water and oil pressure measurement at medium temperatures from -40°C to 60°C.

Submersible Level Sensor for Water/Oil/Fuel Tank, 0-200M

ATO-LEVS-S200M
$173.28
Submersible level sensor adopts 304 stainless steel housing and waterproof cable, can be put in water/oil/fuel tank or reservoir directly for liquid level measurement. The measuring range can be 0-1m/0-3m/0-5m/0-10m ~ 0-200m. Liquid level sensor has optional accuracy 0.5%FS or 0.3%FS, output signal 4-20mA/0-5V/RS485, power supply DC 24V/12V. The cable type and connection type are also customizable.