2.5 hp (1.9 kW) Brushless DC Motor, 48/72/96V, 6 Nm

$553.28
Cheap and best 2.5 hp (1.9 kW) brushless DC electric motor combines with BLDC motor controller at 48V/72V/96V voltage. 3 phase DC motor has 3000 rpm, 6 Nm holding torque, brushless design for long periods of operation.
SKU: ATO-BLDC-1900R3
*
*
*
Free Shipping
Delivery date: 6-25 days

3 phase brushless DC motor kit (2.5 hp BLDC electric motor + BLDC controller + planetary gearbox) for sale, with competitive price, 110mm square flange size, rated speed of 3000 rpm and rated torque of 6 Nm, high efficiency more than 85%. IP54 rating with shaft seal, complete protection from dust particles, can be subjected to moist or humid environments, economical replacement for brush DC motors. In general, it would be more cost-effective to buy a complete set of our BLDC motors.

Basic Specifications

  • Model: ATO-110BLD1900
  • Matched Controller Model: ATO-BD100 (48VDC/72VDC); ATO-BLDC-KBL (24VDC/96VDC) (Click to the controller page)
  • Rated Power: 1900W
  • Rated Voltage: 24V DC / 48V DC / 72V DC / 96V DC (Optional)
  • Rated Current: 100.2A at 24V, 49.5A at 48V, 37A at 72V, 25A at 96V
  • Phase: 3 phase
  • Holding Torque: 6 Nm
  • Peak Torque: 18 Nm
  • Rated Speed: 3000 rpm (Rated input speed is 2000 rpm when using a worm gearbox)
  • No-load Speed: 3600 rpm
  • Square Flange Size: 110 mm (Flange size is 130 mm when using a worm gearbox)
  • Weight: 6.6 kg

Technical Parameters

  • Working Efficiency: 85%
  • Number of Poles: 4 pairs of poles (8 poles)
  • Brake Apparatus Voltage: 24V DC/ 48V DC, (Electromagnetic brake will trigger when the DC supply cuts off)
  • Brake Length: 40-50mm
  • Insulation Grade: F
  • Protection Grade: IP54 (IP65 can be customized, just contact us)
  • Working Temperature: 10℃~+40℃
  • Humidity: ≤90% (no condensation)
  • Motor Lead Length: 30cm
  • Certificate: CE, RoHS, ISO/TS16949

Note: Power, Voltage, Speed, Shaft, Motor Length, and Motor Lead of ATO BLDC Motors can be customized.

Features

  1. High performance and low consumption
    2.5hp BLDC motor is a three phase electric motor, which especially suited for application requiring higher efficiency and power density.
  2. Wide application range and good control effect
    Brushless dc motor works with a matching controller (ATO-BD100) may achieve simple to complex control, turn from CW to CCW, and meet various communication requirements (RS232, RS485, CAN, etc.). BLDC controller can be controlled through 0-5VDC analog signal to adjust the speed.
  3. Wide control speed torque range
    Brushless DC motor works with a gearbox (choose planetary gearbox with gear ratio from 4:1 to 200:1 or worm gearbox with gear ratio from 7.5:1 to 100:1) effectively reduce the motor's speed and moment of inertia to increase torque in your application, because the gearbox can control the start/stop and change speed in time.
  4. Low noise and smooth operation
    Brushless DC motor has no brushes, no sparks will be generated during operation, which greatly reduces friction.
  5. Good protection performance and continuous duty (24/7)
    1900W 48 volt BLDC motor kit adopts a new type of sealing device, which has good protection performance and strong adaptability to the environment, and works continuously in harsh environments such as corrosion and humidity.

Line Define

Power WireHall Wire
RedYellowBlackRedBlackBlueGreenWhite
UVW5VGNDHuHvHw


Dimension (Unit: mm)

1.9 kw bldc motor dimension

Tips: Rotor Position Detector of BLDC Motor

The rotor position detector mounted on the motor shaft is an important part of the brushless DC motor. It determines the moment when the armature phase winding starts to energize. Its role is equivalent to the general brushless DC motor. Changing the timing (phase) of the position detector signal is equivalent to changing the position of the brush in space in the DC motor, which has a great influence on the characteristics of the brushless DC motor.

There are many types of position detectors, which usually include a stationary set of detector elements and a position signal generator that rotates with the rotor of the motor. In a position detector consisting of Hall elements, the Hall element is the sensing element, and the motor rotor pole itself is the position signal former. In other structures, such as electromagnetic induction, photoelectric, and proximity switches, a notched disk is often used as the position signal former. For example, in the photoelectric type, the gap is used to make the light irradiate the photocell to generate a signal. In the electromagnetic induction mode, the gap is used to change the magnetic circuit of the open transformer so as to generate the electromotive force in the detection coil.

PDF:

ATO High Torque BLDC Motor Drawings & Price

Note:

  1. ATO highly recommends 48V motors because all models of 48V are in stock, the price is cheaper and the delivery time is shorter, only about 7 days.
  2. 24V/ 72V/ 96V motors are generally not in stock, need to be produced by the factory, which will cost more to start the production line and the delivery time will be longer, about 25 days.
  3. The prices in the table are just for your reference. If you want to get the latest quotation, please feel free to contact us.
ModelMotor PriceController PriceRated Power
(USD/Piece)(USD/Piece)(kW)
80mm Series DC Brushless Motor
ATO-80WDM01330 24/48/72/96V24V: 458.24395.520.41
48V: 305.49
72/96V: 580.43
ATO-80WDM02420 24/48/72/96V24V: 564.53395.520.5
48V: 376.35
72/96V: 715.06
ATO-80WDM02430 24/48/72/96V24V: 529.16395.520.75
48V: 352.77
72/96V: 670.26
ATO-80WDM03320 24/48/72/96V24V: 597.68395.520.69
48V: 398.45
72/96V: 757.36
ATO-80WDM03330 24/48/72/96V24V: 639.27395.521.04
48V: 426.18
72/96V: 809.74
110mm Series DC Brushless Motor
ATO-110WDM02020 24/48/72/96V24V: 687.38395.520.4
48V: 458.25
72/96V: 824.85
ATO-110WDM02030 24/48/72/96V24V: 745.11395.520.6
48V: 496.74
72/96V: 894.13
ATO-110WDM04010 24/48/72/96V24V: 779.86395.520.4
48V: 519.93
72/96V: 935.87
ATO-110WDM04020 24/48/72/96V24V: 788.57395.520.8
48V: 525.71
72/96V: 988.33
ATO-110WDM04030 24/48/72/96V24V: 798.63653.051.3
48V: 532.42
72/96V: 1001.95
ATO-110WDM06010 24/48/72/96V24V: 758.82395.520.6
48V: 505.88
72/96V: 956.69
ATO-110WDM06020 24/48/72/96V24V: 819.59653.051.3
48V: 546.39
72/96V: 1010.82
ATO-110WDM06030 24/48/72/96V24V: 995.94653.051.9
48V: 553.28
72/96V: 1051.23
130mm Series DC Brushless Motor
ATO-130WDM04010 24/48/72/96V24V: 876.95395.520.4
48V: 584.62
72/96V: 1099.08
ATO-130WDM04020 24/48/72/96V24V: 910.67395.520.8
48V: 607.13
72/96V: 1104.98
ATO-130WDM04030 24/48/72/96V24V: 959.18653.051.3
48V: 639.45
72/96V: 1151.01
ATO-130WDM06010 24/48/72/96V24V: 987.65395.520.6
48V: 658.43
72/96V: 1185.17
ATO-130WDM06020 24/48/72/96V24V: 1012.23653.051.3
48V: 674.82
72/96V: 1147.19
ATO-130WDM06030 24/48/72/96V24V: 1047.72653.051.9
48V: 698.48
72/96V: 1208.34
ATO-130WDM07710 24/48/72/96V24V: 1060.07395.520.8
48V: 706.71
72/96V: 1257.94
ATO-130WDM07720 24/48/72/96V24V: 1093.21653.051.6
48V: 738.65
72/96V: 1292.64
ATO-130WDM07730 48/72/96V48V: 751.52653.052.3
72/96V: 1337.71
ATO-130WDM10010 24/48/72/96V24V: 1161.55653.051
48V: 784.83
72/96V: 1396.89
ATO-130WDM10020 24/48/72/96V24V: 1224.36653.052
48V: 816.24
72/96V: 1371.28
ATO-130WDM10030 48/72/96V48V: 879.12898.213.1
72/96V: 1450.55
ATO-130WDM15010 24/48/72/96V24V:1311.88653.051.6
48V: 936.47
72/96V: 1498.35
ATO-130WDM15020 48/72/96V48V: 1086.36898.213.1
72/96V: 1738.17
ATO-130WDM15030 48/72/96V48V: 1127.541119.074.7
72/96V: 1804.64
180mm Series DC Brushless Motor
ATO-180WDM12010 48/72/96V48V: 1246.31653.051.3
72/96V: 1994.09
ATO-180WDM12020 48/72/96V48V: 1323.69653.052.5
72/96V: 2117.91
ATO-180WDM12030 48/72/96V48V: 1398.84898.213.8
72/96V: 2238.14
ATO-180WDM16010 48/72/96V48V: 1555.69653.051.7
72/96V: 2411.32
ATO-180WDM16020 48/72/96V48V: 1625.36898.213.4
72/96V: 2568.07
ATO-180WDM16030 48/72/96V48V: 1745.931119.075
72/96V: 2618.89
ATO-180WDM25010 48/72/96V48V: 2012.54653.052.6
72/96V: 3179.81
ATO-180WDM25020 48/72/96V48V: 2274.191119.075.2
72/96V: 3411.26
ATO-180WDM25030 48/72/96V48V: 2448.581531.997.9
72/96V: 3672.87
ATO-180WDM36010 48/72/96V48V: 2644.28898.213.8
72/96V: 3966.42
ATO-180WDM36020 48/72/96V48V: 2832.561119.077.5
72/96V: 4248.84
ATO-180WDM36030 72/96V72/96V: 4334.691885.1511.3
ATO-180WDM50010 48/72/96V48V: 3284.581119.075.2
72/96V: 4556.41
ATO-180WDM50020 48/72/96V48V: 4344.121531.9910.8
72/96V: 5994.72
ATO-180WDM50030 96V96V: 6204.652261.8415.7

Wiring ATO High Torque BLDC Motor With Controller

In this video, we will show you how to connect a ATO 400W-15kW 24V/48V/72V/96V high torque brushless DC motor with the matching controller.

How to Make Your BLDC Motor Forward and Reverse Control

If you want your electric car to be more powerful, try using ATO high torque BLDC motor kit as the power unit. It is a good idea. Refer to the video step by step to operate, you can achieve the forward and reverse control of the brushless DC motor.

This video shows you how to connect a 50W 24V 3 phase BLDC motor to its driver and achieve speed control.

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Modbus RS-485 Serial Communication with Upgraded BLDC Motor Driver

This video will provide you with step-by-step instructions for RS485 serial communication with an upgraded ATO BLDC driver rated at 30A/50A/100A.

Product reviews
contact
5
Guest
Avatar
5/2/2018 4:25 AM
Good morning

My name is Marcus Pigato
I work at PSEGrippers.
I wonder if you have driver and control boards of your models.
Does this own encoder?
If you have demonstrative videos.
If you have the possibility of supplying a special item.
For housing in a hole.

What's the communication?
Modbus, CANopen, eternet.

My phone.
55 51 991785145 Whatsap.
Grateful for your attention
Was this review helpful? Yes No (0/0)
ATO Responded
Hi Marcus,
Thank you for your interest.
Yes, we can provide a matched controller/driver for this 1.9 kW BLDC motor. The standard motor has Hall sensors (Hu/Hv/Hw), but not an encoder.
Depending on the controller, RS485/Modbus RTU and CAN Bus communication are available. For CANopen or Ethernet, we need to confirm with our engineering team.
Custom motor configurations are also possible. Please send us a drawing or the required mounting dimensions, especially the hole/bore size, so we can evaluate your application.
Great 2.5 hp 48V BLDC motor
5
Joshua Bruno
Avatar
2/12/2019 11:28 PM
After purchasing 2 other motors, I finally bought this one which has been perfect for my application. I needed something with high torque at low RPMs. This 48V BLDC motor did the job.
Was this review helpful? Yes No (1/0)
Wiring confusion between motor and controller
5
Kiel
Avatar
7/10/2019 7:34 PM
I saw wiring instructions of BLDC motor at your YouTube video for the controller, if I want the motor to run at full speed without speed control - which two wires do i connect together?
Was this review helpful? Yes No (0/0)
ATO Responded
Connect wire 5 and 7 to each other.
Does your 2.5 hp 48V BLDC motor generate stall torque?
5
Emanuel Soares
Avatar
8/9/2020 7:02 PM
Does your 2.5 hp 48V BLDC motor generate stall torque? Like, it can hold with external torque applied on it? Can it produce a reliable torque in stall and while being back driven.
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, our BLDC motor doesn't support producing a reliable and controllable torque in stall while being back-driven, also, the torque is not constant and it can't be controlled.
Working temperature of 1.9KW brushless DC motor
5
Lakin
Avatar
4/17/2021 7:58 PM
For your 1.9 kW BLDC motor, can we use it at -10℃? Also, how can we control the brake, is it manually or electrically?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, motor can work normally at -20~55℃, no need to add heater.
Also for the brake, it can be controlled electrically through 24V supply.
Stall torque of brushless DC motor
5
Finucci
Avatar
6/3/2021 8:45 PM
What is the stall torque for your BLDC motors?
Was this review helpful? Yes No (0/0)
ATO Responded
The stall torque is about 3 times of the rated torque.
Braking mode of 1.9kW brushless DC motor
5
Jbusse
Avatar
8/11/2021 2:22 AM
Is the braking on your 1.5-3KW BLDC high torque motors done electronically or a mechanical brake?
Was this review helpful? Yes No (0/0)
ATO Responded
Our BLDC motors brake is electro-magnetic "24VDC", and it works when the 24VDC is disconnected.
I want to ask you two questions about the 1.9kW brushless DC motor
5
Salocin
Avatar
11/1/2021 9:37 PM
Please could you tell me the number of poles and the coil inductance of your 1.9kW BLDC motor?
Was this review helpful? Yes No (0/0)
ATO Responded
1. Number of Poles: 4 pairs of poles (8 poles).
2. Coil inductance: 53uH.
Interested in this 1.9 kW BLDC motor
5
Matte
Avatar
8/2/2022 2:33 AM
Hi, I'm interested in purchasing 1.9 kW BLDC Motor ATO-BLDC-1900R3 and the corresponding controller ATO-BLDC-TH-G (1 kW to 3 kW) rated for 48V. Can both of these ship immediately? What is the lead time for these? I notice that the motor is rated for 44A at 48V, what would be the total amperage requirements for the motor and controller power supply? 50A? 60A? Do you have 3-D CAD models for them as I am interested in integrating them into a larger machine?
Was this review helpful? Yes No (0/0)
ATO Responded
This 1.9 kW BLDC Motor ATO-BLDC-1900R3 is currently out of production. We recommend a similar motor ATO-130WDM06030-48, which is also 1.9 kW, 3000 rpm, and has a rated current of 44A. If the motor is not overloaded, the total current requirement of the motor and the controller power supply is more than 50A~60A. Currently this motor is in stock, and the lead time will be approx 4-5 working days.
Please check the attached 3D model of this motor ATO-130WDM06030-48, and see the motor spec on: https://www.ato.com/Content/doc/bldc-motor-130mm-series/ATO-130WDM06030-24-48 -72-96.pdf
130WD-M06030-48 Motor Parameters
5
Greg
Avatar
9/8/2023 11:21 AM
Are there any datasheet that include FOC (Field oriented control) parameters such as:
-Flux Proportional Gain
-Flux Integral Gain
-Torque Proportional Gain
-Torque Integral Gain

Thank you.
Was this review helpful? Yes No (0/0)
ATO Responded
We can only provide a graph of the relationship between torque, voltage, power, and time at this time, for more information, please contact our pre-sales technical team.
Adjusting the speed
5
Kumire
Avatar
7/10/2025 8:58 PM
I would like to order a 2.5 hp (1.9 kW) brushless DC motor with a voltage specification of 48/72/96V and a rated torque of 6 Nm (model: ATO-BLDC-1900R3). I would like to increase the rated speed from 3000 rpm to 4500 rpm. Is this adjustment possible?
Was this review helpful? Yes No (0/0)
ATO Responded
Can you please describe your application scenario? How long does the motor need to run? And what is the required protection level? Only with this information can we determine whether we can provide a solution.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

3 phase brushless DC motor kit (2.5 hp BLDC electric motor + BLDC controller + planetary gearbox) for sale, with competitive price, 110mm square flange size, rated speed of 3000 rpm and rated torque of 6 Nm, high efficiency more than 85%. IP54 rating with shaft seal, complete protection from dust particles, can be subjected to moist or humid environments, economical replacement for brush DC motors. In general, it would be more cost-effective to buy a complete set of our BLDC motors.

Basic Specifications

  • Model: ATO-110BLD1900
  • Matched Controller Model: ATO-BD100 (48VDC/72VDC); ATO-BLDC-KBL (24VDC/96VDC) (Click to the controller page)
  • Rated Power: 1900W
  • Rated Voltage: 24V DC / 48V DC / 72V DC / 96V DC (Optional)
  • Rated Current: 100.2A at 24V, 49.5A at 48V, 37A at 72V, 25A at 96V
  • Phase: 3 phase
  • Holding Torque: 6 Nm
  • Peak Torque: 18 Nm
  • Rated Speed: 3000 rpm (Rated input speed is 2000 rpm when using a worm gearbox)
  • No-load Speed: 3600 rpm
  • Square Flange Size: 110 mm (Flange size is 130 mm when using a worm gearbox)
  • Weight: 6.6 kg

Technical Parameters

  • Working Efficiency: 85%
  • Number of Poles: 4 pairs of poles (8 poles)
  • Brake Apparatus Voltage: 24V DC/ 48V DC, (Electromagnetic brake will trigger when the DC supply cuts off)
  • Brake Length: 40-50mm
  • Insulation Grade: F
  • Protection Grade: IP54 (IP65 can be customized, just contact us)
  • Working Temperature: 10℃~+40℃
  • Humidity: ≤90% (no condensation)
  • Motor Lead Length: 30cm
  • Certificate: CE, RoHS, ISO/TS16949

Note: Power, Voltage, Speed, Shaft, Motor Length, and Motor Lead of ATO BLDC Motors can be customized.

Features

  1. High performance and low consumption
    2.5hp BLDC motor is a three phase electric motor, which especially suited for application requiring higher efficiency and power density.
  2. Wide application range and good control effect
    Brushless dc motor works with a matching controller (ATO-BD100) may achieve simple to complex control, turn from CW to CCW, and meet various communication requirements (RS232, RS485, CAN, etc.). BLDC controller can be controlled through 0-5VDC analog signal to adjust the speed.
  3. Wide control speed torque range
    Brushless DC motor works with a gearbox (choose planetary gearbox with gear ratio from 4:1 to 200:1 or worm gearbox with gear ratio from 7.5:1 to 100:1) effectively reduce the motor's speed and moment of inertia to increase torque in your application, because the gearbox can control the start/stop and change speed in time.
  4. Low noise and smooth operation
    Brushless DC motor has no brushes, no sparks will be generated during operation, which greatly reduces friction.
  5. Good protection performance and continuous duty (24/7)
    1900W 48 volt BLDC motor kit adopts a new type of sealing device, which has good protection performance and strong adaptability to the environment, and works continuously in harsh environments such as corrosion and humidity.

Line Define

Power WireHall Wire
RedYellowBlackRedBlackBlueGreenWhite
UVW5VGNDHuHvHw


Dimension (Unit: mm)

1.9 kw bldc motor dimension

Tips: Rotor Position Detector of BLDC Motor

The rotor position detector mounted on the motor shaft is an important part of the brushless DC motor. It determines the moment when the armature phase winding starts to energize. Its role is equivalent to the general brushless DC motor. Changing the timing (phase) of the position detector signal is equivalent to changing the position of the brush in space in the DC motor, which has a great influence on the characteristics of the brushless DC motor.

There are many types of position detectors, which usually include a stationary set of detector elements and a position signal generator that rotates with the rotor of the motor. In a position detector consisting of Hall elements, the Hall element is the sensing element, and the motor rotor pole itself is the position signal former. In other structures, such as electromagnetic induction, photoelectric, and proximity switches, a notched disk is often used as the position signal former. For example, in the photoelectric type, the gap is used to make the light irradiate the photocell to generate a signal. In the electromagnetic induction mode, the gap is used to change the magnetic circuit of the open transformer so as to generate the electromotive force in the detection coil.

Product reviews
contact
5
Guest
Avatar
5/2/2018 4:25 AM
Good morning

My name is Marcus Pigato
I work at PSEGrippers.
I wonder if you have driver and control boards of your models.
Does this own encoder?
If you have demonstrative videos.
If you have the possibility of supplying a special item.
For housing in a hole.

What's the communication?
Modbus, CANopen, eternet.

My phone.
55 51 991785145 Whatsap.
Grateful for your attention
Was this review helpful? Yes No (0/0)
ATO Responded
Hi Marcus,
Thank you for your interest.
Yes, we can provide a matched controller/driver for this 1.9 kW BLDC motor. The standard motor has Hall sensors (Hu/Hv/Hw), but not an encoder.
Depending on the controller, RS485/Modbus RTU and CAN Bus communication are available. For CANopen or Ethernet, we need to confirm with our engineering team.
Custom motor configurations are also possible. Please send us a drawing or the required mounting dimensions, especially the hole/bore size, so we can evaluate your application.
Great 2.5 hp 48V BLDC motor
5
Joshua Bruno
Avatar
2/12/2019 11:28 PM
After purchasing 2 other motors, I finally bought this one which has been perfect for my application. I needed something with high torque at low RPMs. This 48V BLDC motor did the job.
Was this review helpful? Yes No (1/0)
Wiring confusion between motor and controller
5
Kiel
Avatar
7/10/2019 7:34 PM
I saw wiring instructions of BLDC motor at your YouTube video for the controller, if I want the motor to run at full speed without speed control - which two wires do i connect together?
Was this review helpful? Yes No (0/0)
ATO Responded
Connect wire 5 and 7 to each other.
Does your 2.5 hp 48V BLDC motor generate stall torque?
5
Emanuel Soares
Avatar
8/9/2020 7:02 PM
Does your 2.5 hp 48V BLDC motor generate stall torque? Like, it can hold with external torque applied on it? Can it produce a reliable torque in stall and while being back driven.
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, our BLDC motor doesn't support producing a reliable and controllable torque in stall while being back-driven, also, the torque is not constant and it can't be controlled.
Working temperature of 1.9KW brushless DC motor
5
Lakin
Avatar
4/17/2021 7:58 PM
For your 1.9 kW BLDC motor, can we use it at -10℃? Also, how can we control the brake, is it manually or electrically?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, motor can work normally at -20~55℃, no need to add heater.
Also for the brake, it can be controlled electrically through 24V supply.
Stall torque of brushless DC motor
5
Finucci
Avatar
6/3/2021 8:45 PM
What is the stall torque for your BLDC motors?
Was this review helpful? Yes No (0/0)
ATO Responded
The stall torque is about 3 times of the rated torque.
Braking mode of 1.9kW brushless DC motor
5
Jbusse
Avatar
8/11/2021 2:22 AM
Is the braking on your 1.5-3KW BLDC high torque motors done electronically or a mechanical brake?
Was this review helpful? Yes No (0/0)
ATO Responded
Our BLDC motors brake is electro-magnetic "24VDC", and it works when the 24VDC is disconnected.
I want to ask you two questions about the 1.9kW brushless DC motor
5
Salocin
Avatar
11/1/2021 9:37 PM
Please could you tell me the number of poles and the coil inductance of your 1.9kW BLDC motor?
Was this review helpful? Yes No (0/0)
ATO Responded
1. Number of Poles: 4 pairs of poles (8 poles).
2. Coil inductance: 53uH.
Interested in this 1.9 kW BLDC motor
5
Matte
Avatar
8/2/2022 2:33 AM
Hi, I'm interested in purchasing 1.9 kW BLDC Motor ATO-BLDC-1900R3 and the corresponding controller ATO-BLDC-TH-G (1 kW to 3 kW) rated for 48V. Can both of these ship immediately? What is the lead time for these? I notice that the motor is rated for 44A at 48V, what would be the total amperage requirements for the motor and controller power supply? 50A? 60A? Do you have 3-D CAD models for them as I am interested in integrating them into a larger machine?
Was this review helpful? Yes No (0/0)
ATO Responded
This 1.9 kW BLDC Motor ATO-BLDC-1900R3 is currently out of production. We recommend a similar motor ATO-130WDM06030-48, which is also 1.9 kW, 3000 rpm, and has a rated current of 44A. If the motor is not overloaded, the total current requirement of the motor and the controller power supply is more than 50A~60A. Currently this motor is in stock, and the lead time will be approx 4-5 working days.
Please check the attached 3D model of this motor ATO-130WDM06030-48, and see the motor spec on: https://www.ato.com/Content/doc/bldc-motor-130mm-series/ATO-130WDM06030-24-48 -72-96.pdf
130WD-M06030-48 Motor Parameters
5
Greg
Avatar
9/8/2023 11:21 AM
Are there any datasheet that include FOC (Field oriented control) parameters such as:
-Flux Proportional Gain
-Flux Integral Gain
-Torque Proportional Gain
-Torque Integral Gain

Thank you.
Was this review helpful? Yes No (0/0)
ATO Responded
We can only provide a graph of the relationship between torque, voltage, power, and time at this time, for more information, please contact our pre-sales technical team.
Adjusting the speed
5
Kumire
Avatar
7/10/2025 8:58 PM
I would like to order a 2.5 hp (1.9 kW) brushless DC motor with a voltage specification of 48/72/96V and a rated torque of 6 Nm (model: ATO-BLDC-1900R3). I would like to increase the rated speed from 3000 rpm to 4500 rpm. Is this adjustment possible?
Was this review helpful? Yes No (0/0)
ATO Responded
Can you please describe your application scenario? How long does the motor need to run? And what is the required protection level? Only with this information can we determine whether we can provide a solution.
Only registered users can write reviews
Customers who bought this item also bought

1 hp (750W) Brushless DC Motor, 24V/48V/72V, 2.4 Nm

ATO-BLDC-750R3
$352.77
1 hp (750W) brushless DC electric motor with reasonable price, 3 phase 4 pair of poles design, 3000 rpm rated speed, 2.3 Nm holding torque, works at 24V/48V DC power supply. Buy BLDC motor controller and gearbox combines with the BLDC motor will provide you higher torque.

DC-DC Buck Converter, 48V to 24V

ATO-DCDC-4824
$72.14
Affordable price 48V DC to 24V DC buck converter series for sales, step down voltage of 48 volt to 24 volt, with different models from 3 amps to 63 amps, 72 watts to 1500 watts, 35V-60V input voltage range, high efficiency up to 98%, IP68 for body.

2 hp (1.5 kW) Brushless DC Motor, 36V/48V, 4.78 Nm

ATO-BLDC-1500R3
$432.36
Buy best 1500 watt brushless DC motor kit (3 phase BLDC motor and controller) at low price for your electric car. Motor features 3000 rpm rated speed, 4.78 Nm holding torque, peak torque up to 14.33 Nm, working at 36V / 48V DC power supply.

3 hp (2.3 kW) Brushless DC Motor, 48V/72V/96V, 7.3 Nm

ATO-BLDC-2300R3
$751.52
3 hp (2.3 kW) brushless DC electric motor kit (3 phase BLDC motor + BLDC controller + planetary gearbox ) at best price. Features 3000 rpm rated speed and 7.3 Nm holding torque, peak torque up to 23 Nm, operating at DC 48 volt, 72 volt, 96 volt.

50A 60V 3000W Variable DC Power Supply

ATO-VDCPS6050K
$1,150.39
Shop 0 to 50A, 0 to 60V variable DC power supply at economical price. It is switching mode with 3000W DC output, selectable single phase 110V or 220V±10% AC input, 3 digit LED display. Output voltage and current are continuously adjustable at nominal value, with constant voltage (CV) / constant current (CC) output precision.