5 hp (3.8 kW) Brushless DC Motor, 48V/72V/96V, 12 Nm

$1,398.84
Factory price high torque brushless DC motor has 3000 rpm rated speed, 5 hp (3.8kW) rating power, 12 Nm holding torque, 48V/72V/96V DC working voltage for choice, IP65 protection. 3 phase BLDC electric motor paired with controller best for electric vehicle.
SKU: ATO-BLDC-3800R3
*
*
*
*
Free Shipping
Delivery date: 20-30 days

3.8 kW (5 hp) high power BLDC motor works at 48V/72V/96V DC voltage, brushless design for long life. It provides 12 Nm high rated torque, 3000 rpm rated speed, peak torque up to 30 Nm and max. speed to 3600 rpm. Voltage, Brake, Matching Controller, Matching Gearbox options are available for your specific needs. Usually, ATO recommends buying a kit of 5hp 48 volt BLDC motor.

Basic Specifications

  • Model: ATO-DB180-48(3800W-30ST)
  • Matched Controller Model: ATO-KBL / ATO-KEB (Click to the controller page)
  • Rated Power: 3800W
  • Rated Voltage: 48V DC / 72V DC / 96V DC (Optional)
  • Rated Current: 98.9A at 48V, 62A at 72V, 46A at 96V
  • Phase: 3 phase
  • Holding Torque: 12 Nm
  • Peak Torque: 30 Nm
  • Rated Speed: 3000 rpm
  • No-load Speed: 3600 rpm
  • Square Flange Size: 180 mm
  • Weight: 18.6 kg

Technical Parameters

  • Working Efficiency: 85%
  • Number of Poles: 4 pairs of poles (8 poles)
  • Brake Apparatus Voltage: 24V DC/ 48V DC, (Electromagnetic brake will trigger when the DC supply cuts off)
  • Brake Length: 40-50mm
  • Insulation Grade: F
  • Protection Grade: IP65
  • Working Temperature: 0℃~+40℃
  • Humidity: 0%-95% RH (no condensing)
  • Motor Lead Length: 30 cm, if you buy a kit (motor+controller), an extra 1 meter of wire shall be provided.
  • Certificate: CE, RoHS, ISO/TS16949

Note: Power, Voltage, Speed, Shaft, Motor Length, and Motor Lead of ATO BLDC Motors can be customized.

Features

  1. High performance and low consumption
    3.8 kW brushless DC motor is three phase electric motor, which especially suited for application requiring higher efficiency and power density.
  2. Wide application range and good control effect
    BLDC motor works with a matching controller (ATO-KBL) may achieve simple to complex control, turn from CW to CCW, and meet various communication requirements (RS232, RS485, CAN, etc.). BLDC controller can be controlled through 0-5VDC analog signal to adjust the speed.
  3. Wide control speed torque range
    Brushless DC motor works with a gearbox (choose inline gearbox or right angle gearbox with gear ratio from 3:1 to 200:1) effectively reduce the motor's speed and moment of inertia to increase torque in your application, because the gearbox can control the start/stop and change speed in time.
  4. Low noise and smooth operation
    Brushless DC motor has no brushes, no sparks will be generated during operation, which greatly reduces friction.
  5. Good protection performance and continuous duty (24/7)
    5 hp BLDC motor kit adopts a new type of sealing device, which has good protection performance and strong adaptability to the environment, and works continuously in harsh environments such as corrosion and humidity.

Line Define

Power Wire

Power WireHall Wire
RedURed5V
YellowVBlackGND
BlackWBlueHu
GreenHv
WhiteHw

Feedback Wire

Hall Line ColorOrange and BlackOrangeYellowBlueGreen
Hall Signal Definition5V0VHall AHall BHall C
Plug Serial Number12345


Dimension (Unit: mm)

5kw 3000rpm bldc motor size

Speed - Torque Curve

ATO-180WDM12030-48 speed torque curve

Details

3.8KW Brushless DC Motor Details

Tips: Different Working Principle between BLDC Motor and Stepper Motor

BLDC motor
The BLDC motor uses semiconductor switching devices to realize electronic commutation, that is, it uses electronic switching devices to replace traditional contact commutators and brushes. The brushless dc motor has the advantages of high reliability, no reversing sparks, low mechanical noise, etc., so it is widely used in high-end audio recorders, video recorders, electronic instruments and automated office equipment.

Stepper motor
Nema stepper motor is based on the principle of electromagnets to convert electrical energy into mechanical energy. It is driven by coils wound on the slots of the motor stator. The biggest difference between a stepper motor and other control motors is that the stepper motor can receive digital control signals (electric pulse signals) and convert them into corresponding angular or linear displacements. It is actually an executive element that completes digital mode conversion. Moreover, it can be open-loop position control. Input a pulse signal to get a prescribed position increment.

PDF:

ATO High Torque BLDC Motor Drawings & Price

Note:

  1. ATO highly recommends 48V motors because all models of 48V are in stock, the price is cheaper and the delivery time is shorter, only about 7 days.
  2. 24V/ 72V/ 96V motors are generally not in stock, need to be produced by the factory, which will cost more to start the production line and the delivery time will be longer, about 25 days.
  3. The prices in the table are just for your reference. If you want to get the latest quotation, please feel free to contact us.
ModelMotor PriceController PriceRated Power
(USD/Piece)(USD/Piece)(kW)
80mm Series DC Brushless Motor
ATO-80WDM01330 24/48/72/96V24V: 458.24395.520.41
48V: 305.49
72/96V: 580.43
ATO-80WDM02420 24/48/72/96V24V: 564.53395.520.5
48V: 376.35
72/96V: 715.06
ATO-80WDM02430 24/48/72/96V24V: 529.16395.520.75
48V: 352.77
72/96V: 670.26
ATO-80WDM03320 24/48/72/96V24V: 597.68395.520.69
48V: 398.45
72/96V: 757.36
ATO-80WDM03330 24/48/72/96V24V: 639.27395.521.04
48V: 426.18
72/96V: 809.74
110mm Series DC Brushless Motor
ATO-110WDM02020 24/48/72/96V24V: 687.38395.520.4
48V: 458.25
72/96V: 824.85
ATO-110WDM02030 24/48/72/96V24V: 745.11395.520.6
48V: 496.74
72/96V: 894.13
ATO-110WDM04010 24/48/72/96V24V: 779.86395.520.4
48V: 519.93
72/96V: 935.87
ATO-110WDM04020 24/48/72/96V24V: 788.57395.520.8
48V: 525.71
72/96V: 988.33
ATO-110WDM04030 24/48/72/96V24V: 798.63653.051.3
48V: 532.42
72/96V: 1001.95
ATO-110WDM06010 24/48/72/96V24V: 758.82395.520.6
48V: 505.88
72/96V: 956.69
ATO-110WDM06020 24/48/72/96V24V: 819.59653.051.3
48V: 546.39
72/96V: 1010.82
ATO-110WDM06030 24/48/72/96V24V: 995.94653.051.9
48V: 553.28
72/96V: 1051.23
130mm Series DC Brushless Motor
ATO-130WDM04010 24/48/72/96V24V: 876.95395.520.4
48V: 584.62
72/96V: 1099.08
ATO-130WDM04020 24/48/72/96V24V: 910.67395.520.8
48V: 607.13
72/96V: 1104.98
ATO-130WDM04030 24/48/72/96V24V: 959.18653.051.3
48V: 639.45
72/96V: 1151.01
ATO-130WDM06010 24/48/72/96V24V: 987.65395.520.6
48V: 658.43
72/96V: 1185.17
ATO-130WDM06020 24/48/72/96V24V: 1012.23653.051.3
48V: 674.82
72/96V: 1147.19
ATO-130WDM06030 24/48/72/96V24V: 1047.72653.051.9
48V: 698.48
72/96V: 1208.34
ATO-130WDM07710 24/48/72/96V24V: 1060.07395.520.8
48V: 706.71
72/96V: 1257.94
ATO-130WDM07720 24/48/72/96V24V: 1093.21653.051.6
48V: 738.65
72/96V: 1292.64
ATO-130WDM07730 48/72/96V48V: 751.52653.052.3
72/96V: 1337.71
ATO-130WDM10010 24/48/72/96V24V: 1161.55653.051
48V: 784.83
72/96V: 1396.89
ATO-130WDM10020 24/48/72/96V24V: 1224.36653.052
48V: 816.24
72/96V: 1371.28
ATO-130WDM10030 48/72/96V48V: 879.12898.213.1
72/96V: 1450.55
ATO-130WDM15010 24/48/72/96V24V:1311.88653.051.6
48V: 936.47
72/96V: 1498.35
ATO-130WDM15020 48/72/96V48V: 1086.36898.213.1
72/96V: 1738.17
ATO-130WDM15030 48/72/96V48V: 1127.541119.074.7
72/96V: 1804.64
180mm Series DC Brushless Motor
ATO-180WDM12010 48/72/96V48V: 1246.31653.051.3
72/96V: 1994.09
ATO-180WDM12020 48/72/96V48V: 1323.69653.052.5
72/96V: 2117.91
ATO-180WDM12030 48/72/96V48V: 1398.84898.213.8
72/96V: 2238.14
ATO-180WDM16010 48/72/96V48V: 1555.69653.051.7
72/96V: 2411.32
ATO-180WDM16020 48/72/96V48V: 1625.36898.213.4
72/96V: 2568.07
ATO-180WDM16030 48/72/96V48V: 1745.931119.075
72/96V: 2618.89
ATO-180WDM25010 48/72/96V48V: 2012.54653.052.6
72/96V: 3179.81
ATO-180WDM25020 48/72/96V48V: 2274.191119.075.2
72/96V: 3411.26
ATO-180WDM25030 48/72/96V48V: 2448.581531.997.9
72/96V: 3672.87
ATO-180WDM36010 48/72/96V48V: 2644.28898.213.8
72/96V: 3966.42
ATO-180WDM36020 48/72/96V48V: 2832.561119.077.5
72/96V: 4248.84
ATO-180WDM36030 72/96V72/96V: 4334.691885.1511.3
ATO-180WDM50010 48/72/96V48V: 3284.581119.075.2
72/96V: 4556.41
ATO-180WDM50020 48/72/96V48V: 4344.121531.9910.8
72/96V: 5994.72
ATO-180WDM50030 96V96V: 6204.652261.8415.7

Wiring ATO High Torque BLDC Motor With Controller

In this video, we will show you how to connect a ATO 400W-15kW 24V/48V/72V/96V high torque brushless DC motor with the matching controller.

How to Make Your BLDC Motor Forward and Reverse Control

If you want your electric car to be more powerful, try using ATO high torque BLDC motor kit as the power unit. It is a good idea. Refer to the video step by step to operate, you can achieve the forward and reverse control of the brushless DC motor.

This video shows you how to connect a 50W 24V 3 phase BLDC motor to its driver and achieve speed control.

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Modbus RS-485 Serial Communication with Upgraded BLDC Motor Driver

This video will provide you with step-by-step instructions for RS485 serial communication with an upgraded ATO BLDC driver rated at 30A/50A/100A.

Product reviews
Can you customize your 5hp BLDC motor to be with 125:1 gear box?
5
Charlie Bibby
Avatar
7/30/2019 7:01 PM
Can you customize your 5hp BLDC motor to be with 125:1 gear box?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can.
Is it possible to get the motor customized with my requirements?
5
Ivan
Avatar
10/21/2019 7:14 PM
I want a BLDC motor with peak power less than 6kW. I also want rated power about 4kW. I saw a motor on your web site with rated power 3.8 kW. But the peak power is 9.4kW. So is it possible to get the motor customized with my requirements.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can provide it.
The BLDC motor controller has an internal current limiting function. According to P=UI, by setting the max current value, the maximum output power can be reached.
Do you have a 5HP or 5KW motor at 24VDC brushless?
5
Zulfikri Muchtar
Avatar
4/27/2020 7:20 PM
1. Do you have a 5HP or 5KW motor at 24VDC brushless? What is the largest motor you have in 24VDC BLDC?
2. Can your BLDC motor runs 24 hours in 6 mounts without stop? And what is its service life?
Was this review helpful? Yes No (0/0)
ATO Responded
1. Unfortunately can not provide 24VDC input option for 5kW BLDC motor, the minimum voltage is 48VDC. The max power capacity we provide based on 24VDC is 2.5 hp (1.9 kW).
2. As long as the temperature of the motor is below 40 degrees at running, there is no problem of continuous operation for 6 months. (Note: If the motor load is too large, it will cause the current to increase, causing the temperature rise), and the service life of is more than 10,000 hours.
Efficiency of 5hp brushless DC motor
5
Justin
Avatar
3/10/2021 5:47 PM
What is the working efficiency of the 5hp brushless DC motor? Is it high?
Was this review helpful? Yes No (0/0)
ATO Responded
The working efficiency of the 5hp brushless DC motor is very high, up to 85%.
Worth the money
5
Jeffers
Avatar
6/27/2021 9:14 PM
We need 5hp BLDC motor with speed needs to be constant with no load and full load, can you provide?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes we can. The motor speed can be constant, and the controller with CAN is used to control the motor and of course the speed of the motor can be adjusted.
Speed control of BLDC motor
5
Inson
Avatar
1/11/2022 7:23 PM
Your BLDC motors controllers have the possibility control speed with input 0-10V?
Was this review helpful? Yes No (0/0)
ATO Responded
BLDC motor drive can be controlled through 0-5VDC analog signal to adjust the speed.
Can we customize BLDC motor?
5
Ukgreg
Avatar
1/24/2022 11:20 PM
We require a 170 volt dc rating BLDC motor. My controller produces 170 volts dc and requires a motor able to operate in that environment. Can you customize it?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can provide.
Torque rating
3
Michael
Avatar
6/30/2022 3:40 PM
The Basic specifications list peak torque at 30Nm, however the chart included lists the peak torque at 5.4Nm.  What is the correct peak torque for the motor running 48V system?
Was this review helpful? Yes No (0/0)
Three quesitons regarding all the controlers
5
Nancy
Avatar
10/16/2023 9:59 PM
1- Can the velocity be regulated via CAN communication?

2- Can the controller be programmed via CAN communication?

3- And lastly, do you send orders to south america?
Was this review helpful? Yes No (0/0)
ATO Responded
For ATO-BLDC-3800R3 motor, the controller can be programmed via CAN communication to control the speed.
But for 500W, 12VDC motor, CAN can only be used to monitor the parameters of the motor and cannot be used to control the operation.
I wanted to contact you regarding the DC motors that ATO offers
5
Nancy
Avatar
10/16/2023 11:52 PM
Looking at your website, I ran a cross a 5HP, 48V, DC motor (model ATO-180WDM12030). I wanted to know if you offer a driver for that motor, which allows to control its velocity (we are interested in 5HP output at 1000rpm).

Apart from that, we are also looking for a 48V DC motor which can deliver 5kW at 1500rpm, and a 12V DC motor that can deliver 500W at 3000rpm and that has a velocity regulation mechanism,

Would you happen to have products that suit the prior descriptions?

Thank you in advance, I will be waiting for your reply.
Was this review helpful? Yes No (0/0)
ATO Responded
We can provide 500W, 3000rpm, 12VDC BLDC motor, the price is the same as the 24V voltage on our website.
But the matching controller needs to use ATO-BLDC-C100, input voltage range 12-60VDC, see spec on: https://www.ato.com/brushless-dc-motor-controller-12v-60v
I want to know about the 12V motor
5
April
Avatar
10/18/2023 3:02 AM
1- What is the mechanism to regulate velocity in the 12V motor (taking into account that we cannot control the operation via CAN)?

And I want to add a question about another motor, the 48V 5kW DC motor, model
ATO-180WDM16030.

2- If we buy it with its matched controller, does it allow us to to have the 5kW output at 1500rpm (instead of the 3000rpm which is it rated speed)?

3- Does it allow to soft start and to control the operation via CAN?

Thank you very much!
Was this review helpful? Yes No (0/0)
ATO Responded
1. The speed of 2V motor can use analog potentiometer, analog signal 4-20ma/0-10v, PWM signal, etc.

2. For a 5kW motor, if the speed drops to 1500rpm, the power of the motor will also drop by about half. The controller can soft-start the motor through analog signals, and the acceleration and deceleration time can be set before leaving the factory.
So if you want the motor to maintain 5000W power at 1500 rpm, you need a motor with more capacity, such as this one:https://www.ato.com/Content/doc/bldc-motor-180mm-series/
Question for 48V motor
5
Jude
Avatar
10/19/2023 3:17 AM
1- For the ATO-BLDC-3800R3 (the 48V 5HP DC motor), does the power also drop if we control the speed to be 1000rpm?

2- Can speed be regulated via CAN during operation? (For the 7,5kW motor you suggested last email and fot the 5HP motor we discussed in the prior emails).
Was this review helpful? Yes No (0/0)
ATO Responded
1.Yes, For the ATO-BLDC-3800R3, the power also drop if you control the speed to be 1000rpm, this is the same as the 5KW motor.
In fact, the brushless motor can only maintain full power at the rated speed. If the motor speed is reduced, the power and torque will decrease at the same time, and the output torque will be very small below 500rpm.
So if you want the motor to maintain the same rated output torque at different speeds, we recommend you use a servo motor.

2. The ATO-BLDC-3800R3 can adjust the speed through Can during operation without any problem. But the 500W motor is Not suitable.
I need some advice
5
Tate
Avatar
9/23/2024 12:08 AM
The actual output requirements that I need are 25.5Nm, 1374 rpm. Do you offer a 2:1 right angle gearbox for this motor? That would get the speed requirement where it needs to be while keeping torque in the right ballpark as well. Otherwise the output will be only 1000 rpm which is too slow. Please advise.
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, the minimum speed ratio of our right-angle planetary reducer is only 3:1, and there is no 2:1. So the output speed can only be 1000rpm after configuring the reducer, or you can enlarge the capacity of the motor and reduce the motor speed to about 1300rpm through control.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

3.8 kW (5 hp) high power BLDC motor works at 48V/72V/96V DC voltage, brushless design for long life. It provides 12 Nm high rated torque, 3000 rpm rated speed, peak torque up to 30 Nm and max. speed to 3600 rpm. Voltage, Brake, Matching Controller, Matching Gearbox options are available for your specific needs. Usually, ATO recommends buying a kit of 5hp 48 volt BLDC motor.

Basic Specifications

  • Model: ATO-DB180-48(3800W-30ST)
  • Matched Controller Model: ATO-KBL / ATO-KEB (Click to the controller page)
  • Rated Power: 3800W
  • Rated Voltage: 48V DC / 72V DC / 96V DC (Optional)
  • Rated Current: 98.9A at 48V, 62A at 72V, 46A at 96V
  • Phase: 3 phase
  • Holding Torque: 12 Nm
  • Peak Torque: 30 Nm
  • Rated Speed: 3000 rpm
  • No-load Speed: 3600 rpm
  • Square Flange Size: 180 mm
  • Weight: 18.6 kg

Technical Parameters

  • Working Efficiency: 85%
  • Number of Poles: 4 pairs of poles (8 poles)
  • Brake Apparatus Voltage: 24V DC/ 48V DC, (Electromagnetic brake will trigger when the DC supply cuts off)
  • Brake Length: 40-50mm
  • Insulation Grade: F
  • Protection Grade: IP65
  • Working Temperature: 0℃~+40℃
  • Humidity: 0%-95% RH (no condensing)
  • Motor Lead Length: 30 cm, if you buy a kit (motor+controller), an extra 1 meter of wire shall be provided.
  • Certificate: CE, RoHS, ISO/TS16949

Note: Power, Voltage, Speed, Shaft, Motor Length, and Motor Lead of ATO BLDC Motors can be customized.

Features

  1. High performance and low consumption
    3.8 kW brushless DC motor is three phase electric motor, which especially suited for application requiring higher efficiency and power density.
  2. Wide application range and good control effect
    BLDC motor works with a matching controller (ATO-KBL) may achieve simple to complex control, turn from CW to CCW, and meet various communication requirements (RS232, RS485, CAN, etc.). BLDC controller can be controlled through 0-5VDC analog signal to adjust the speed.
  3. Wide control speed torque range
    Brushless DC motor works with a gearbox (choose inline gearbox or right angle gearbox with gear ratio from 3:1 to 200:1) effectively reduce the motor's speed and moment of inertia to increase torque in your application, because the gearbox can control the start/stop and change speed in time.
  4. Low noise and smooth operation
    Brushless DC motor has no brushes, no sparks will be generated during operation, which greatly reduces friction.
  5. Good protection performance and continuous duty (24/7)
    5 hp BLDC motor kit adopts a new type of sealing device, which has good protection performance and strong adaptability to the environment, and works continuously in harsh environments such as corrosion and humidity.

Line Define

Power Wire

Power WireHall Wire
RedURed5V
YellowVBlackGND
BlackWBlueHu
GreenHv
WhiteHw

Feedback Wire

Hall Line ColorOrange and BlackOrangeYellowBlueGreen
Hall Signal Definition5V0VHall AHall BHall C
Plug Serial Number12345


Dimension (Unit: mm)

5kw 3000rpm bldc motor size

Speed - Torque Curve

ATO-180WDM12030-48 speed torque curve

Details

3.8KW Brushless DC Motor Details

Tips: Different Working Principle between BLDC Motor and Stepper Motor

BLDC motor
The BLDC motor uses semiconductor switching devices to realize electronic commutation, that is, it uses electronic switching devices to replace traditional contact commutators and brushes. The brushless dc motor has the advantages of high reliability, no reversing sparks, low mechanical noise, etc., so it is widely used in high-end audio recorders, video recorders, electronic instruments and automated office equipment.

Stepper motor
Nema stepper motor is based on the principle of electromagnets to convert electrical energy into mechanical energy. It is driven by coils wound on the slots of the motor stator. The biggest difference between a stepper motor and other control motors is that the stepper motor can receive digital control signals (electric pulse signals) and convert them into corresponding angular or linear displacements. It is actually an executive element that completes digital mode conversion. Moreover, it can be open-loop position control. Input a pulse signal to get a prescribed position increment.

Product reviews
Can you customize your 5hp BLDC motor to be with 125:1 gear box?
5
Charlie Bibby
Avatar
7/30/2019 7:01 PM
Can you customize your 5hp BLDC motor to be with 125:1 gear box?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can.
Is it possible to get the motor customized with my requirements?
5
Ivan
Avatar
10/21/2019 7:14 PM
I want a BLDC motor with peak power less than 6kW. I also want rated power about 4kW. I saw a motor on your web site with rated power 3.8 kW. But the peak power is 9.4kW. So is it possible to get the motor customized with my requirements.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can provide it.
The BLDC motor controller has an internal current limiting function. According to P=UI, by setting the max current value, the maximum output power can be reached.
Do you have a 5HP or 5KW motor at 24VDC brushless?
5
Zulfikri Muchtar
Avatar
4/27/2020 7:20 PM
1. Do you have a 5HP or 5KW motor at 24VDC brushless? What is the largest motor you have in 24VDC BLDC?
2. Can your BLDC motor runs 24 hours in 6 mounts without stop? And what is its service life?
Was this review helpful? Yes No (0/0)
ATO Responded
1. Unfortunately can not provide 24VDC input option for 5kW BLDC motor, the minimum voltage is 48VDC. The max power capacity we provide based on 24VDC is 2.5 hp (1.9 kW).
2. As long as the temperature of the motor is below 40 degrees at running, there is no problem of continuous operation for 6 months. (Note: If the motor load is too large, it will cause the current to increase, causing the temperature rise), and the service life of is more than 10,000 hours.
Efficiency of 5hp brushless DC motor
5
Justin
Avatar
3/10/2021 5:47 PM
What is the working efficiency of the 5hp brushless DC motor? Is it high?
Was this review helpful? Yes No (0/0)
ATO Responded
The working efficiency of the 5hp brushless DC motor is very high, up to 85%.
Worth the money
5
Jeffers
Avatar
6/27/2021 9:14 PM
We need 5hp BLDC motor with speed needs to be constant with no load and full load, can you provide?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes we can. The motor speed can be constant, and the controller with CAN is used to control the motor and of course the speed of the motor can be adjusted.
Speed control of BLDC motor
5
Inson
Avatar
1/11/2022 7:23 PM
Your BLDC motors controllers have the possibility control speed with input 0-10V?
Was this review helpful? Yes No (0/0)
ATO Responded
BLDC motor drive can be controlled through 0-5VDC analog signal to adjust the speed.
Can we customize BLDC motor?
5
Ukgreg
Avatar
1/24/2022 11:20 PM
We require a 170 volt dc rating BLDC motor. My controller produces 170 volts dc and requires a motor able to operate in that environment. Can you customize it?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can provide.
Torque rating
3
Michael
Avatar
6/30/2022 3:40 PM
The Basic specifications list peak torque at 30Nm, however the chart included lists the peak torque at 5.4Nm.  What is the correct peak torque for the motor running 48V system?
Was this review helpful? Yes No (0/0)
Three quesitons regarding all the controlers
5
Nancy
Avatar
10/16/2023 9:59 PM
1- Can the velocity be regulated via CAN communication?

2- Can the controller be programmed via CAN communication?

3- And lastly, do you send orders to south america?
Was this review helpful? Yes No (0/0)
ATO Responded
For ATO-BLDC-3800R3 motor, the controller can be programmed via CAN communication to control the speed.
But for 500W, 12VDC motor, CAN can only be used to monitor the parameters of the motor and cannot be used to control the operation.
I wanted to contact you regarding the DC motors that ATO offers
5
Nancy
Avatar
10/16/2023 11:52 PM
Looking at your website, I ran a cross a 5HP, 48V, DC motor (model ATO-180WDM12030). I wanted to know if you offer a driver for that motor, which allows to control its velocity (we are interested in 5HP output at 1000rpm).

Apart from that, we are also looking for a 48V DC motor which can deliver 5kW at 1500rpm, and a 12V DC motor that can deliver 500W at 3000rpm and that has a velocity regulation mechanism,

Would you happen to have products that suit the prior descriptions?

Thank you in advance, I will be waiting for your reply.
Was this review helpful? Yes No (0/0)
ATO Responded
We can provide 500W, 3000rpm, 12VDC BLDC motor, the price is the same as the 24V voltage on our website.
But the matching controller needs to use ATO-BLDC-C100, input voltage range 12-60VDC, see spec on: https://www.ato.com/brushless-dc-motor-controller-12v-60v
I want to know about the 12V motor
5
April
Avatar
10/18/2023 3:02 AM
1- What is the mechanism to regulate velocity in the 12V motor (taking into account that we cannot control the operation via CAN)?

And I want to add a question about another motor, the 48V 5kW DC motor, model
ATO-180WDM16030.

2- If we buy it with its matched controller, does it allow us to to have the 5kW output at 1500rpm (instead of the 3000rpm which is it rated speed)?

3- Does it allow to soft start and to control the operation via CAN?

Thank you very much!
Was this review helpful? Yes No (0/0)
ATO Responded
1. The speed of 2V motor can use analog potentiometer, analog signal 4-20ma/0-10v, PWM signal, etc.

2. For a 5kW motor, if the speed drops to 1500rpm, the power of the motor will also drop by about half. The controller can soft-start the motor through analog signals, and the acceleration and deceleration time can be set before leaving the factory.
So if you want the motor to maintain 5000W power at 1500 rpm, you need a motor with more capacity, such as this one:https://www.ato.com/Content/doc/bldc-motor-180mm-series/
Question for 48V motor
5
Jude
Avatar
10/19/2023 3:17 AM
1- For the ATO-BLDC-3800R3 (the 48V 5HP DC motor), does the power also drop if we control the speed to be 1000rpm?

2- Can speed be regulated via CAN during operation? (For the 7,5kW motor you suggested last email and fot the 5HP motor we discussed in the prior emails).
Was this review helpful? Yes No (0/0)
ATO Responded
1.Yes, For the ATO-BLDC-3800R3, the power also drop if you control the speed to be 1000rpm, this is the same as the 5KW motor.
In fact, the brushless motor can only maintain full power at the rated speed. If the motor speed is reduced, the power and torque will decrease at the same time, and the output torque will be very small below 500rpm.
So if you want the motor to maintain the same rated output torque at different speeds, we recommend you use a servo motor.

2. The ATO-BLDC-3800R3 can adjust the speed through Can during operation without any problem. But the 500W motor is Not suitable.
I need some advice
5
Tate
Avatar
9/23/2024 12:08 AM
The actual output requirements that I need are 25.5Nm, 1374 rpm. Do you offer a 2:1 right angle gearbox for this motor? That would get the speed requirement where it needs to be while keeping torque in the right ballpark as well. Otherwise the output will be only 1000 rpm which is too slow. Please advise.
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, the minimum speed ratio of our right-angle planetary reducer is only 3:1, and there is no 2:1. So the output speed can only be 1000rpm after configuring the reducer, or you can enlarge the capacity of the motor and reduce the motor speed to about 1300rpm through control.
Only registered users can write reviews
Customers who bought this item also bought

200A DC Contactor, 12V/24V/48V

ATO-DCCON-C200
$121.65
This 200 amps contactor is available in coil voltage 12V, 24V, 48V, continuous operating duty, normally open (NO) or normally closed (NC) contact form, high quality DC contactor with high-performance quality, low cost and manufacturer direct sale.