90 W DC Worm Gear Motor, 12V/24V/48V

$473.52
Economical price 90 W DC worm gear motor for sale online, optional 12V, 24V, 36V or 48V power supply, gear ratio from 7.5:1 to 60:1, rated speed 2000 rpm, rated torque 0.29N·m, motor dimension 86mm, brushless design for electric car and industrial equipment.
SKU: ATO-GEAR-W90
*
*
Free Shipping
Delivery date: 6-25 days

Buy 90 W worm gear motor at best price. This BLDC gear motor is best for new energy electric car, renewable energy systems, industrial equipment which require high torque density and compact occasions.

Specification

Motor ModelATOD5BLD90-12AATOD5BLD90-24AATOD5BLD90-36AATOD5BLD90-48A
Motor TypeBLDC Motor
Power90W
Voltage12V DC24V DC36V DC48V DC
Rated Current9.38A4.69A3.13A2.34A
No Load Current<0.85A<0.7A<0.6A<0.5A
No Load Speed2700 rpm
Rated Speed2000 rpm
Rated Torque0.29N·m
Peak Torque0.87N·m
Motor Dimension86mm
Shaft Diameter11mm
ConstructionPermanent Magnet
Direction of RotationCW/CCW
CertificateCCC, CE, ROSH, LVD, EMC
Gear Ratio7.5, 10, 15, 20, 30, 40, 50, 60
Recommended Drive ModelATO-BLD300BATO-BLD300BATO-BLD300BATO-BLD300B
What Parameters of ATO Worm Gear Motors Can Be Customized?
PowerYes
VoltageYes
SpeedYes
ShaftYes
Motor LengthYes
Motor LeadYes

Allowable Torque with Gear Head

Gear Ratio7.510152030405060
Rated Output Speed (rpm)26720013310067504033
Rated Output Torque (Nm)2.63.45.26.79.510.010.010.0

Note:

  • This torque value is the rated output value of the reducer, not the final motor + output torque value T after reducer.
  • The formula for calculating the output torque after the final motor + reducer: T = rated torque of the motor * reduction ratio * 0.6, and T≤ rated allowable output torque value of the reducer.

Dimensions (Unit: mm)

Mounting screws are included with gearhead

Dimensions of 90 W DC Worm Gear Motor

Speed-Torque Curve

90 W DC Worm Gear Motor Speed Torque Curve

  • Instantaneous maximum torque line
    The maximum torque momentarily impacts the load when the motor is started.
    Beyond this torque, the over-current protection of the driver will cause the motor to stop.
  • Short time operation area
    The motor can run at a short time within this torque range at different speeds.
    If the operation time is too long, the motor will generate heat, which may cause the motor to stop or burn.
  • Rated operating torque line
    The rated torque of motor running at different speeds, and the motor can run for a long time at this torque.
  • Continuous operating area
    When the motor rotates at different speeds, it runs continuously in this corresponding zone.

Details

90W DC Worm Gear Motor Details

Tips: Factors affecting the service life of DC worm gear motors

  • The installation and commissioning process of the worm gear motor was not strict enough, and the problems found were not dealt with in time.
  • the quality of the worm gear motor itself is poor.
  • Insufficient maintenance of various indicating instruments and incorrect indications of the instruments, resulting in operating errors.
  • The maintenance and maintenance of the worm gear motor is not enough, and the operation of the equipment is not regularly checked on time.
  • The worm gear motor is overloaded, such as large defects.
  • The job responsibility system is not sound enough, such as job responsibility system, job operation method, shift system, safety technology, etc.
  • The operator is not familiar with the equipment structure, performance, allowable load, lubrication and related technical parameters.
  • Insufficient lubrication management, unreasonable selection of lubricating oil, failure to clean up the outlet end and return end of the lubrication pipeline, and timely replacement of lubricating oil in accordance with relevant regulations.

In order to prolong the service life of the worm gear motor, you should pay attention to standard operation during use. Whether the operation method is correct can often directly affect the quality of the equipment and production safety. In addition, pay attention to maintenance and overhaul in peacetime, and try to prevent failures in advance. If problems are found, they must be dealt with in a timely manner to avoid small things from becoming bigger.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
Do you provide a 1500W gear motor?
5
Sterize
Avatar
1/6/2022 12:04 AM
Do you provide a 1500W gear motor?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we provide 1500W gear motors. This is the link to the product.
https://www.ato.com/1500-w-dc-worm-gear-motor
Gear motor specifications
5
Trindo
Avatar
6/8/2025 8:09 PM
Can you please share the detailed specifications of the ATO-GEAR-W90 model, including weight and torque vs. RPM graph?
Was this review helpful? Yes No (0/0)
ATO Responded
Thanks for your question, but unfortunately, we do not have data on cogging torque at this time. The motor weighs 2.5 kg, and the torque vs. RPM graph will not be available until the motor is produced and tested.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Buy 90 W worm gear motor at best price. This BLDC gear motor is best for new energy electric car, renewable energy systems, industrial equipment which require high torque density and compact occasions.

Specification

Motor ModelATOD5BLD90-12AATOD5BLD90-24AATOD5BLD90-36AATOD5BLD90-48A
Motor TypeBLDC Motor
Power90W
Voltage12V DC24V DC36V DC48V DC
Rated Current9.38A4.69A3.13A2.34A
No Load Current<0.85A<0.7A<0.6A<0.5A
No Load Speed2700 rpm
Rated Speed2000 rpm
Rated Torque0.29N·m
Peak Torque0.87N·m
Motor Dimension86mm
Shaft Diameter11mm
ConstructionPermanent Magnet
Direction of RotationCW/CCW
CertificateCCC, CE, ROSH, LVD, EMC
Gear Ratio7.5, 10, 15, 20, 30, 40, 50, 60
Recommended Drive ModelATO-BLD300BATO-BLD300BATO-BLD300BATO-BLD300B
What Parameters of ATO Worm Gear Motors Can Be Customized?
PowerYes
VoltageYes
SpeedYes
ShaftYes
Motor LengthYes
Motor LeadYes

Allowable Torque with Gear Head

Gear Ratio7.510152030405060
Rated Output Speed (rpm)26720013310067504033
Rated Output Torque (Nm)2.63.45.26.79.510.010.010.0

Note:

  • This torque value is the rated output value of the reducer, not the final motor + output torque value T after reducer.
  • The formula for calculating the output torque after the final motor + reducer: T = rated torque of the motor * reduction ratio * 0.6, and T≤ rated allowable output torque value of the reducer.

Dimensions (Unit: mm)

Mounting screws are included with gearhead

Dimensions of 90 W DC Worm Gear Motor

Speed-Torque Curve

90 W DC Worm Gear Motor Speed Torque Curve

  • Instantaneous maximum torque line
    The maximum torque momentarily impacts the load when the motor is started.
    Beyond this torque, the over-current protection of the driver will cause the motor to stop.
  • Short time operation area
    The motor can run at a short time within this torque range at different speeds.
    If the operation time is too long, the motor will generate heat, which may cause the motor to stop or burn.
  • Rated operating torque line
    The rated torque of motor running at different speeds, and the motor can run for a long time at this torque.
  • Continuous operating area
    When the motor rotates at different speeds, it runs continuously in this corresponding zone.

Details

90W DC Worm Gear Motor Details

Tips: Factors affecting the service life of DC worm gear motors

  • The installation and commissioning process of the worm gear motor was not strict enough, and the problems found were not dealt with in time.
  • the quality of the worm gear motor itself is poor.
  • Insufficient maintenance of various indicating instruments and incorrect indications of the instruments, resulting in operating errors.
  • The maintenance and maintenance of the worm gear motor is not enough, and the operation of the equipment is not regularly checked on time.
  • The worm gear motor is overloaded, such as large defects.
  • The job responsibility system is not sound enough, such as job responsibility system, job operation method, shift system, safety technology, etc.
  • The operator is not familiar with the equipment structure, performance, allowable load, lubrication and related technical parameters.
  • Insufficient lubrication management, unreasonable selection of lubricating oil, failure to clean up the outlet end and return end of the lubrication pipeline, and timely replacement of lubricating oil in accordance with relevant regulations.

In order to prolong the service life of the worm gear motor, you should pay attention to standard operation during use. Whether the operation method is correct can often directly affect the quality of the equipment and production safety. In addition, pay attention to maintenance and overhaul in peacetime, and try to prevent failures in advance. If problems are found, they must be dealt with in a timely manner to avoid small things from becoming bigger.

Product reviews
Do you provide a 1500W gear motor?
5
Sterize
Avatar
1/6/2022 12:04 AM
Do you provide a 1500W gear motor?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we provide 1500W gear motors. This is the link to the product.
https://www.ato.com/1500-w-dc-worm-gear-motor
Gear motor specifications
5
Trindo
Avatar
6/8/2025 8:09 PM
Can you please share the detailed specifications of the ATO-GEAR-W90 model, including weight and torque vs. RPM graph?
Was this review helpful? Yes No (0/0)
ATO Responded
Thanks for your question, but unfortunately, we do not have data on cogging torque at this time. The motor weighs 2.5 kg, and the torque vs. RPM graph will not be available until the motor is produced and tested.
Only registered users can write reviews