Hydraulic triple gear pump with affordable price sales online. Displacement 8/9/11/13/14 Max. GPM, working pressure 3000~3600 psi, rated speed 1800 rpm, max 3500 rpm, clockwise or counterclockwise rotary. Hydraulic triple gear pump uses 3 working pumps, widely used in industrial/agricultural/commercial machinery, construction, environmental protection, chemical equipment and other applications.
Specification
| Model | ATO-HGP-333A | |||||||||
| Displacement | mL/ rev | |||||||||
| 6 | 8.4 | 11 | 14.3 | 16.5 | 19.2 | 23 | 25 | 28 | 30 | |
| Max. GPM (Gallon/min) | ||||||||||
| 3 | 4 | 5 | 7 | 8 | 9 | 11 | 12 | 13 | 14 | |
| Rated Speed | 1800 rpm | 1800 rpm | 1800 rpm | 1800 rpm | 1800 rpm | 1800 rpm | 1800 rpm | 1800 rpm | 1800 rpm | 1800 rpm |
| Max. Speed | 3500 rpm | 3500 rpm | 3000 rpm | 3000 rpm | 3000 rpm | 3000 rpm | 3000 rpm | 3000 rpm | 3000 rpm | 3000 rpm |
| Min. Speed | 700 rpm | 700 rpm | 600 rpm | 600 rpm | 500 rpm | 500 rpm | 500 rpm | 500 rpm | 500 rpm | 500 rpm |
| Rated Pressure | 3000 psi (21 MPa) | |||||||||
| Max. Pressure | 3600 psi (25 MPa) | |||||||||
| Volumetric Efficiency | 90% | 90% | 93% | 93% | 93% | 93% | 93% | 93% | 93% | 93% |
| Mechanical Efficiency | 88% | 88% | 88% | 88% | 88% | 88% | 88% | 90% | 90% | 90% |
| Inlet Thread | 3/4 inch | 1 inch | ||||||||
| Outlet Thread | 1/2 inch | 3/4 inch | ||||||||
| Rotary Direction | clockwise, counterclockwise | |||||||||
| Working Temperature | -20℃~70℃ | |||||||||
| Shaft Extension | φ 17.48mm flat key | |||||||||
| Mounting Flange | SAE 2-bolt | |||||||||
Note:
- Please use ATO gear pump with sufficient oil, otherwise there is a risk of burnout!
- Calculate the actual displacement value according to the formula: Gallon/min=displacement (ml/rev)*rated speed 1800rpm/3785.41L (speed variation range 500rpm-3000rpm).
Features
- Hydraulic triple gear pump uses high-strength aluminum alloy shell and alloy steel hard gear transmission, which is light in weight and stable in transmission.
- Installation of the hydraulic triple gear pump is SAE 2-bolt standard flange. Input shaft connection is woodruff key. Connection type of the oil inlet and outlet ports is thread.
- Hydraulic triple gear pump has an automatic compensation mechanism for axial and radial clearances, which enables the oil pump to maintain high volumetric efficiency and high mechanical efficiency for a long time.
- Hydraulic triple gear pump uses SP gears, with small fluctuation, high pressure, low noise and stable performance.
- Hydraulic triple gear pump uses composite material bearings and high-performance sealing elements, has a small starting torque and good tightness, and can work efficiently under harsh working conditions.
- The front and rear gear pumps work independently of each other, and any combination of displacements can be customized according to requirements.
8/9/11/13/14 GPM Hydraulic Triple Gear Pump Dimensions Diagram (Unit: mm)

| Pump 1 Displacement (Max. GPM) | Pump 2 Displacement (Max. GPM) | Pump 3 Displacement (Max. GPM) | A (mm) | B (mm) | C (mm) | D (mm) | Weight (kg) |
| 14 | 3 | 3 | 284 | 70 | 89.5 | 69.5 | 7.5 |
| 13 | 3 | 3 | 280 | 68 | 87.5 | 69.5 | 7.4 |
| 12 | 3 | 3 | 276 | 66 | 85.5 | 69.5 | 7.3 |
| 14 | 4 | 4 | 290 | 70 | 91 | 72.5 | 7.7 |
| 13 | 4 | 4 | 286 | 68 | 89 | 72.5 | 7.6 |
| 12 | 4 | 4 | 282 | 66 | 87 | 72.5 | 7.5 |
| 14 | 5 | 5 | 302 | 70 | 93 | 78.5 | 7.9 |
| 13 | 5 | 5 | 298 | 68 | 91 | 78.5 | 7.8 |
| 12 | 5 | 5 | 294 | 66 | 89 | 78.5 | 7.7 |
| 3 | 3 | 3 | 244 | 50 | 69.5 | 69.5 | 6.4 |
| 4 | 4 | 4 | 253 | 51.5 | 72.5 | 72.5 | 6.7 |
| 5 | 5 | 5 | 270 | 54 | 78.5 | 78.5 | 7.0 |
| 7 | 7 | 7 | 286 | 57 | 83.5 | 83.5 | 7.3 |
| 8 | 8 | 8 | 283 | 59 | 87.5 | 80 | 7.4 |
| 9 | 9 | 9 | 291 | 61 | 91.5 | 82 | 7.6 |
| 11 | 11 | 11 | 305 | 65 | 98.5 | 85.5 | 7.9 |
| 12 | 12 | 12 | 311 | 66 | 101.5 | 87 | 8.2 |
| 13 | 13 | 13 | 319 | 68 | 105.5 | 89 | 8.5 |
| 14 | 14 | 14 | 327 | 70 | 109.5 | 91 | 8.8 |
*Note: the dimensions of other displacement combinations will not be listed one by one. Please contact us for more information.
Details

Tips: How to extend service life of the hydraulic triple gear pump?
- Use a kerosene brush to clean the gear surface of hydraulic triple gear pump, and then use a whetstone to clean up the debris left during boring.
- Be careful not to install the right-handed pump on the left-handed pump, otherwise the skeleton oil seal of hydraulic triple gear pump will be damaged.
- Before installing the pump cover, pour a small amount of hydraulic oil into the housing of the hydraulic triple gear pump, and turn the meshing gear by hand.
- After installing the hydraulic triple gear pump, before tightening bolts, check whether the gap between the pump cover and pump body is between 0.3~0.6mm. If the gap is too small, replace the large sealing ring. After all installations are completed, check to make sure that the rotation is flexible and no jamming.
- When oil leaks from the inlet and outlet ports of hydraulic triple gear pump, use sandpaper to flatten the joint surface of the two, and replace the appropriate sealing rings. Polish the chamfered burr of the threaded connection port with a whetstone, and replace the intact sealing ring (pad). It is strictly forbidden to wind it with various types of sealant and raw material tape.
Product reviews
3600psi hydraulic triple gear pump with good sealing performance
Bianca
7/29/2021 3:11 AM
I bought this 3600psi hydraulic triple gear pump to transport chemical products. Its sealing performance is very good, so there is no need to worry about leakage. I like to use it at work very much. It is of great help to my work.
Was this review helpful? (0/0)
Question about hydraulic triple gear pump
Kylan
4/4/2023 2:47 AM
Good afternoon, there is no problem with the pump we are using for our industrial snowblower program, we just want to reverse the rotation from clockwise to counterclockwise. Are there specific instructions available for the three section pumps we are using? Thanks very much for getting back to us.
Was this review helpful? (0/0)
customer feedback
Adam
6/13/2024 7:00 PM
I have an ATO-HTGP-13580 triple gear pump. The pump was ordered as CCW rotation. Is that CCW as viewed from the input shaft end or CCW as viewed from the pump back cover?
The pump is working, but not putting out much flow or pressure. Is that what happens if it’s running backwards? Any other ideas what could be wrong?
The pump is working, but not putting out much flow or pressure. Is that what happens if it’s running backwards? Any other ideas what could be wrong?
Was this review helpful? (0/0)
About triple gear pump
Xzavier
7/16/2024 1:32 AM
We have an ATO-HTGP-13580 triple gear pump in an experimental application. To get better filtration on the pump inlet, we’re considering a change to the hydraulic circuit so that the triple gear pump inlet oil comes from the filtered outlet of a variable displacement charge pump. The charge pump outlet pressure is 4 bar. Are the seals, etc. of this triple gear pump able to handle inlet oil at a 4 bar charge pressure?
Was this review helpful? (0/0)
Customized displacement
Zaol
5/14/2025 8:22 PM
Do you have equipment with flow rates of approximately 30 gpm, 15 gpm, and 15 gpm?
Was this review helpful? (0/0)
Pump request
Searn
9/9/2025 8:54 PM
I need a pump similar to this: a 14cc triple pump with a TC (threaded connection) and an SAE-spec orifice plate.
Was this review helpful? (0/0)
Only registered users can write reviews