1/2/3 GPM Hydraulic Triple Gear Pump, 3600 psi

$479.69
Hydraulic triple gear pump with 3 working pumps. Displacement 1/2/3 Max. GPM for selection, operating pressure 3000~3600 psi, rated speed 1800 rpm, maximum 4300 rpm, volumetric efficiency 88~91%, mechanical efficiency 85~88%, oil inlet/outlet thread 3/8 inch, clockwise/counterclockwise rotary. Professional manufacturer, competitive price.
SKU: ATO-HTGP-124536
*
*
*
*
Free Shipping
Delivery date: 6-12 days

Factory price hydraulic triple gear pump for sale. Displacement 1/2/3 Max. GPM, working pressure 3000~3600 psi, speed 1800~4300 rpm, clockwise or counterclockwise rotary is available, SAE 2-bolt flange mounted. Hydraulic triple gear pump has 3 working pumps. Wide applications: industrial/agricultural/commercial machinery, construction, environmental protection, chemical equipment and so on.

Specification

ModelATO-HGP-111A
DisplacementmL/ rev
0.81234567.8
Max. GPM (Gallon/min)
0.40.511.41.92.42.83.7
Rated Speed1800 rpm1800 rpm1800 rpm1800 rpm1800 rpm1800 rpm1800 rpm1800 rpm
Max. Speed4300 rpm4300 rpm4300 rpm4300 rpm3200 rpm3200 rpm3200 rpm3200 rpm
Min. Speed1000 rpm1000 rpm1000 rpm600 rpm600 rpm600 rpm600 rpm600 rpm
Rated Pressure3000 psi (21 MPa)
Max. Pressure3600 psi (25 MPa)
Volumetric Efficiency88%88%88%91%91%91%91%91%
Mechanical Efficiency85%85%85%88%88%88%88%88%
Inlet ThreadPT 3/8"PT 1/2"
Outlet ThreadPT 3/8"
Rotary Directionclockwise, counterclockwise
Working Temperature-20℃~70℃
Mounting FlangeSAE 2-bolt

Note: 

  1. Please use ATO gear pump with sufficient oil, otherwise there is a risk of burnout!
  2. Calculate the actual displacement value according to the formula: Gallon/min=displacement (ml/rev)*rated speed 1800rpm/3785.41L (speed variation range 500rpm-3000rpm).

Features

  • Hydraulic triple gear pump uses high-strength aluminum alloy shell and alloy steel hard gear transmission, which is light in weight and stable in transmission.
  • Installation of the hydraulic triple gear pump is SAE 2-bolt standard flange. Input shaft connection is woodruff key. Connection type of the oil inlet and outlet ports is thread.
  • Hydraulic triple gear pump has an automatic compensation mechanism for axial and radial clearances, which enables the oil pump to maintain high volumetric efficiency and high mechanical efficiency for a long time.
  • Hydraulic triple gear pump uses SP gears, with small fluctuation, high pressure, low noise and stable performance.
  • Hydraulic triple gear pump uses composite material bearings and high-performance sealing elements, has a small starting torque and good tightness, and can work efficiently under harsh working conditions.
  • The front and rear gear pumps work independently of each other, and any combination of displacements can be customized according to requirements.

1/2/3 GPM Hydraulic Triple Gear Pump Dimensions Diagram (Unit: mm)

Dimensions of 1/2/4/5 GPM Hydraulic Triple Gear Pump, 3600 psi

Pump 1 Displacement
(Max. GPM)
Pump 2 Displacement (Max. GPM)Pump 3 Displacement (Max. GPM)A (mm)B (mm)C (mm)D (mm)Weight (kg)
3.70.40.4201.545.567543.0
2.80.40.4195.542.564542. 9
2.40.40.4191.540.562542.8
3.70.50.5205.545.568563.1
2.80.50.5199.542.565563.0
2.40.50.5195.540.563562.9
3.711210.545.569.558.53.3
2.811204.542.566.558.53.2
2.411200.540.564.558.53.1
3.71.41.4221.545.572643.4
2.81.41.4215.542.569643.4
2.41.41.4211.540.567643.3
0.40.40.4175.532.554542.5
0.50.50.5181.533.556562.7
11118934.858.558.52.9
1.41.41.4205.537.564643.2
1.91.91.9212.538.566663.2
2.42.42.4207.540.570613.0
2.82.82.821542.574633.2
3.73.73.7227.545.580653.4

*Note: the dimensions of other displacement combinations will not be listed one by one. Please contact us for more information.

Details

1/2/3 GPM Hydraulic Triple Gear Pump Details

Tips: Hydraulic triple gear pump maintenance.

  1. According to the season, add or replace the hydraulic oil that meets the requirements to the specified oil level for the hydraulic triple gear pump. Take out the foreign matter in the oil pipe and tighten the bolt or nut of joint.
  2. Replace the aging or damaged skeleton oil seal or O-shaped sealing rubber ring.
  3. Replace worn gears or sleeves. If the wear degree slight, grind the end face smooth on flat plate. The allowable error of unevenness is 0.03mm, and the end face of the upper shaft sleeve is lower than the upper plane of the pump body (the normal value is lower than 0.10~0.15mm).
  4. The unloading groove on shaft sleeve must be installed on the side of the low pressure chamber to eliminate the harmful dead volume generated when the gear meshes.
  5. Before pressing in the self-tightening oil seal, a layer of lubricating oil should be applied to its surface. Note that the oil blocking edge faces the front cover and cannot be installed backwards.
  6. After disassembling the hydraulic triple gear pump, thoroughly clean the pump body and internal parts before replacing the seals. Dip kerosene with fine sandpaper and gently push it flat, and then install a new seal.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Excellent product
5
Nina
Avatar
7/22/2021 1:28 AM
I've bought other brands before. The noise is very loud. I can hear it every 50 meters. Now I've replaced the ATO pump. The noise is much less. The power of the three working gears is very strong. I highly recommend it.
Was this review helpful? Yes No (0/0)
Do you have a larger version pump?
5
Benjamin
Avatar
11/26/2023 7:02 PM
So then 50 gpm at max speed. Do you have a larger version pump? GPM of 60 or higher?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, our gear pump is 50 gpm at max speed. If it is required to do 60GPM, it needs to be customized, but the MOQ requirement is 100PCS.
Compatibility Issue
4
Reina
Avatar
5/7/2026 9:41 PM
Hello, I have a small skid steer loader equipped with a three-stage gear pump (6/6/6 cc/rpm) with a flow rate of approximately 10-12 gpm, clockwise rotation (2-bolt SAE A-mount, 9-tooth spline). Inlet: 3/4 inch or 1 inch barbed connector; Outlet: 1/2 inch or 5/8 inch connector. Is your SKU: ATO-HTGP-124536 compatible with my machine?
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, the 2-bolt SAE A-mount, 9-tooth spline requires customization, with a minimum order quantity of 50 units.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Factory price hydraulic triple gear pump for sale. Displacement 1/2/3 Max. GPM, working pressure 3000~3600 psi, speed 1800~4300 rpm, clockwise or counterclockwise rotary is available, SAE 2-bolt flange mounted. Hydraulic triple gear pump has 3 working pumps. Wide applications: industrial/agricultural/commercial machinery, construction, environmental protection, chemical equipment and so on.

Specification

ModelATO-HGP-111A
DisplacementmL/ rev
0.81234567.8
Max. GPM (Gallon/min)
0.40.511.41.92.42.83.7
Rated Speed1800 rpm1800 rpm1800 rpm1800 rpm1800 rpm1800 rpm1800 rpm1800 rpm
Max. Speed4300 rpm4300 rpm4300 rpm4300 rpm3200 rpm3200 rpm3200 rpm3200 rpm
Min. Speed1000 rpm1000 rpm1000 rpm600 rpm600 rpm600 rpm600 rpm600 rpm
Rated Pressure3000 psi (21 MPa)
Max. Pressure3600 psi (25 MPa)
Volumetric Efficiency88%88%88%91%91%91%91%91%
Mechanical Efficiency85%85%85%88%88%88%88%88%
Inlet ThreadPT 3/8"PT 1/2"
Outlet ThreadPT 3/8"
Rotary Directionclockwise, counterclockwise
Working Temperature-20℃~70℃
Mounting FlangeSAE 2-bolt

Note: 

  1. Please use ATO gear pump with sufficient oil, otherwise there is a risk of burnout!
  2. Calculate the actual displacement value according to the formula: Gallon/min=displacement (ml/rev)*rated speed 1800rpm/3785.41L (speed variation range 500rpm-3000rpm).

Features

  • Hydraulic triple gear pump uses high-strength aluminum alloy shell and alloy steel hard gear transmission, which is light in weight and stable in transmission.
  • Installation of the hydraulic triple gear pump is SAE 2-bolt standard flange. Input shaft connection is woodruff key. Connection type of the oil inlet and outlet ports is thread.
  • Hydraulic triple gear pump has an automatic compensation mechanism for axial and radial clearances, which enables the oil pump to maintain high volumetric efficiency and high mechanical efficiency for a long time.
  • Hydraulic triple gear pump uses SP gears, with small fluctuation, high pressure, low noise and stable performance.
  • Hydraulic triple gear pump uses composite material bearings and high-performance sealing elements, has a small starting torque and good tightness, and can work efficiently under harsh working conditions.
  • The front and rear gear pumps work independently of each other, and any combination of displacements can be customized according to requirements.

1/2/3 GPM Hydraulic Triple Gear Pump Dimensions Diagram (Unit: mm)

Dimensions of 1/2/4/5 GPM Hydraulic Triple Gear Pump, 3600 psi

Pump 1 Displacement
(Max. GPM)
Pump 2 Displacement (Max. GPM)Pump 3 Displacement (Max. GPM)A (mm)B (mm)C (mm)D (mm)Weight (kg)
3.70.40.4201.545.567543.0
2.80.40.4195.542.564542. 9
2.40.40.4191.540.562542.8
3.70.50.5205.545.568563.1
2.80.50.5199.542.565563.0
2.40.50.5195.540.563562.9
3.711210.545.569.558.53.3
2.811204.542.566.558.53.2
2.411200.540.564.558.53.1
3.71.41.4221.545.572643.4
2.81.41.4215.542.569643.4
2.41.41.4211.540.567643.3
0.40.40.4175.532.554542.5
0.50.50.5181.533.556562.7
11118934.858.558.52.9
1.41.41.4205.537.564643.2
1.91.91.9212.538.566663.2
2.42.42.4207.540.570613.0
2.82.82.821542.574633.2
3.73.73.7227.545.580653.4

*Note: the dimensions of other displacement combinations will not be listed one by one. Please contact us for more information.

Details

1/2/3 GPM Hydraulic Triple Gear Pump Details

Tips: Hydraulic triple gear pump maintenance.

  1. According to the season, add or replace the hydraulic oil that meets the requirements to the specified oil level for the hydraulic triple gear pump. Take out the foreign matter in the oil pipe and tighten the bolt or nut of joint.
  2. Replace the aging or damaged skeleton oil seal or O-shaped sealing rubber ring.
  3. Replace worn gears or sleeves. If the wear degree slight, grind the end face smooth on flat plate. The allowable error of unevenness is 0.03mm, and the end face of the upper shaft sleeve is lower than the upper plane of the pump body (the normal value is lower than 0.10~0.15mm).
  4. The unloading groove on shaft sleeve must be installed on the side of the low pressure chamber to eliminate the harmful dead volume generated when the gear meshes.
  5. Before pressing in the self-tightening oil seal, a layer of lubricating oil should be applied to its surface. Note that the oil blocking edge faces the front cover and cannot be installed backwards.
  6. After disassembling the hydraulic triple gear pump, thoroughly clean the pump body and internal parts before replacing the seals. Dip kerosene with fine sandpaper and gently push it flat, and then install a new seal.

Product reviews
Excellent product
5
Nina
Avatar
7/22/2021 1:28 AM
I've bought other brands before. The noise is very loud. I can hear it every 50 meters. Now I've replaced the ATO pump. The noise is much less. The power of the three working gears is very strong. I highly recommend it.
Was this review helpful? Yes No (0/0)
Do you have a larger version pump?
5
Benjamin
Avatar
11/26/2023 7:02 PM
So then 50 gpm at max speed. Do you have a larger version pump? GPM of 60 or higher?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, our gear pump is 50 gpm at max speed. If it is required to do 60GPM, it needs to be customized, but the MOQ requirement is 100PCS.
Compatibility Issue
4
Reina
Avatar
5/7/2026 9:41 PM
Hello, I have a small skid steer loader equipped with a three-stage gear pump (6/6/6 cc/rpm) with a flow rate of approximately 10-12 gpm, clockwise rotation (2-bolt SAE A-mount, 9-tooth spline). Inlet: 3/4 inch or 1 inch barbed connector; Outlet: 1/2 inch or 5/8 inch connector. Is your SKU: ATO-HTGP-124536 compatible with my machine?
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, the 2-bolt SAE A-mount, 9-tooth spline requires customization, with a minimum order quantity of 50 units.
Only registered users can write reviews