3/5/13/14 GPM Hydraulic Single Gear Pump, 3600 psi

$198.85
Buy hydraulic single gear pump at good price. Displacement 13/15/18/20 Max. GPM for selection, high pressure 3000~3600 psi, rated speed 1800 rpm, max 3500 rpm, max volumetric efficiency 93%, mechanical efficiency 90%, oil inlet port thread 3/4 inch, outlet 1/2 inch, clockwise or counterclockwise rotary, installation flange SAE 2-bolt. Industrial/commercial hydraulic pump, small size, lightweight.
SKU: ATO-HGPP-3580
*
*
Free Shipping
Delivery date: 6-12 days

Hydraulic single gear pump for sale. Available displacement 3/5/13/14 Max. GPM, maximum pressure 3600 psi, speed 500~3500 rpm, optional clockwise or counterclockwise rotary. The small hydraulic gear pump has applications in automobile, hardware, industrial machinery, textile, commercial machinery, chemical equipment, environmental protection, military industry, national defense, etc.

Specification

ModelATO-HGP-3A
DisplacementmL/ rev
68.41114.316.519.223252830
Max. GPM (Gallon/min)
34578911121314
Rated Speed1800 rpm1800 rpm1800 rpm1800 rpm1800 rpm1800 rpm1800 rpm1800 rpm1800 rpm1800 rpm
Max. Speed3500 rpm3500 rpm3000 rpm3000 rpm3000 rpm3000 rpm3000 rpm3000 rpm3000 rpm3000 rpm
Min. Speed700 rpm700 rpm600 rpm600 rpm500 rpm500 rpm500 rpm500 rpm500 rpm500 rpm
Rated Pressure3000 psi (21 MPa)
Max. Pressure3600 psi (25 MPa)
Volumetric Efficiency90%90%93%93%93%93%93%93%93%93%
Mechanical Efficiency88%88%88%88%88%88%88%90%90%90%
Weight2.3 kg2.4 kg2.6 kg2.7 kg2.8 kg2.9 kg3.1 kg3.2 kg3.3 kg3.4 kg
Rotary Directionclockwise, counterclockwise
Working Temperature-20℃~70℃
Mounting FlangeSAE 2-bolt
Shaft Extensionφ 17.48mm flat key

Note:

  1. Please use ATO gear pump with sufficient oil, otherwise there is a risk of burnout!
  2. Calculate the actual displacement value according to the formula: Gallon/min=displacement (ml/rev)*rated speed 1800rpm/3785.41L (speed variation range 500rpm-3000rpm).

Features

  • Hydraulic single gear pump uses high-strength aluminum alloy shell and alloy steel hard gear transmission, which is light in weight and stable in transmission.
  • Hydraulic single gear pump is suitable for SAE standard flange installation. The input shaft connection is woodruff key. Connection type of the oil inlet and outlet ports is thread.
  • Hydraulic single gear pump has an automatic compensation mechanism for axial and radial clearances, which enables the oil pump to maintain high volumetric efficiency and high mechanical efficiency for a long time.
  • Hydraulic single gear pump uses SP gears, with small fluctuation, high pressure, low noise and stable performance.
  • DU composite material bearings and high-performance sealing elements, small starting torque, good sealing performance, and strong anti-fouling ability, so that hydraulic single gear pump can work efficiently under harsh working conditions.

3/5/13/14 GPM Hydraulic Single Gear Pump Dimensions Diagram (Unit: mm)

Dimensions of Hydraulic Single Gear Pump, 3600 psi

DisplacementABOil InletOil Outlet
6 mL/ rev105503/4 inch1/2 inch
8.4 mL/ rev10951.5
11 mL/ rev11354
14.5 mL/ rev11957
16.5 mL/ rev12359
19.2 mL/ rev12761
23 mL/ rev13465
25 mL/ rev13766
28 mL/ rev141681 inch3/4 inch
30 mL/ rev14570

Details

Hydraulic Single Gear Pump Details

Tips: Why does the hydraulic single gear pump have internal leakage?

Hydraulic single gear pump internal parts wear and tear will cause internal leakage. Among them, the large leakage area between the floating shaft sleeve and the gear end surface is the main part that cause internal leakage. This part of leakage accounts for about 50% to 70% of the total internal leakage. For the hydraulic single gear pump with internal leakage, its volumetric efficiency drops, and the output power is much lower than the input power. All of its losses are converted into heat, which will cause the hydraulic single gear pump to overheat. If the bonding plane is pressed tightly, a small amount of movement of the floating shaft sleeve during work will cause abrasion. As a result, the oil cylinder will rise slowly or cannot be lifted. Such floating shaft sleeves must be replaced or repaired.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
It's a excellent hydraulic single gear pump for the money
5
Ziv
Avatar
7/22/2021 2:41 AM
How can the hydraulic single gear pump last longer?
Was this review helpful? Yes No (0/0)
ATO Responded
Correct installation and reasonable use of gear pumps are important to extend the service life of hydraulic system gear pumps. When the input journal of the gear pump is connected with the motor shaft, the coaxially error should not exceed 0.10mm. It should not be connected with a belt. In addition, the appropriate hydraulic oil should be selected according to the pump operating instructions. Add a filter at the inlet of the gear pump, and regularly filter or replace the hydraulic oil based on the working environment of the hydraulic system.
Can this produce 20 GPM?
5
Shaun
Avatar
3/6/2023 10:55 PM
I'm looking for a hydraulic pump with a min output of 19 GMP at 3600 psi. I saw this one. Can this produce 20 GPM? What are the drive motor requirements?
Was this review helpful? Yes No (0/0)
ATO Responded
1. The maximum displacement is 35ml/rev, if you want to produce 20GPM/Min, the motor speed should be at least 2000-2500 rpm. In fact, 1 US gallon (gallon) = 3785.411784 milliliters (ml), and the correct displacement calculation is Gallon/min = displacement (35ml/rev) * motor speed 2500rpm/ 3785.411784 milliliters.
2.  Motor power = (pressure x displacement x motor revolutions) / 60000
But unfortunately, we do Not provide 2000-2500 RPM 3-phase motors.
What kind of Hydraulic fluid does the pump use
5
Owens
Avatar
11/28/2023 6:48 PM
The pump is running specialized home made equipment we built for seismic data acquisition. What kind of Hydraulic fluid does the pump use?
Was this review helpful? Yes No (0/0)
ATO Responded
For our hydraulic gear pump, we recommend using 46# hydraulic oil.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Hydraulic single gear pump for sale. Available displacement 3/5/13/14 Max. GPM, maximum pressure 3600 psi, speed 500~3500 rpm, optional clockwise or counterclockwise rotary. The small hydraulic gear pump has applications in automobile, hardware, industrial machinery, textile, commercial machinery, chemical equipment, environmental protection, military industry, national defense, etc.

Specification

ModelATO-HGP-3A
DisplacementmL/ rev
68.41114.316.519.223252830
Max. GPM (Gallon/min)
34578911121314
Rated Speed1800 rpm1800 rpm1800 rpm1800 rpm1800 rpm1800 rpm1800 rpm1800 rpm1800 rpm1800 rpm
Max. Speed3500 rpm3500 rpm3000 rpm3000 rpm3000 rpm3000 rpm3000 rpm3000 rpm3000 rpm3000 rpm
Min. Speed700 rpm700 rpm600 rpm600 rpm500 rpm500 rpm500 rpm500 rpm500 rpm500 rpm
Rated Pressure3000 psi (21 MPa)
Max. Pressure3600 psi (25 MPa)
Volumetric Efficiency90%90%93%93%93%93%93%93%93%93%
Mechanical Efficiency88%88%88%88%88%88%88%90%90%90%
Weight2.3 kg2.4 kg2.6 kg2.7 kg2.8 kg2.9 kg3.1 kg3.2 kg3.3 kg3.4 kg
Rotary Directionclockwise, counterclockwise
Working Temperature-20℃~70℃
Mounting FlangeSAE 2-bolt
Shaft Extensionφ 17.48mm flat key

Note:

  1. Please use ATO gear pump with sufficient oil, otherwise there is a risk of burnout!
  2. Calculate the actual displacement value according to the formula: Gallon/min=displacement (ml/rev)*rated speed 1800rpm/3785.41L (speed variation range 500rpm-3000rpm).

Features

  • Hydraulic single gear pump uses high-strength aluminum alloy shell and alloy steel hard gear transmission, which is light in weight and stable in transmission.
  • Hydraulic single gear pump is suitable for SAE standard flange installation. The input shaft connection is woodruff key. Connection type of the oil inlet and outlet ports is thread.
  • Hydraulic single gear pump has an automatic compensation mechanism for axial and radial clearances, which enables the oil pump to maintain high volumetric efficiency and high mechanical efficiency for a long time.
  • Hydraulic single gear pump uses SP gears, with small fluctuation, high pressure, low noise and stable performance.
  • DU composite material bearings and high-performance sealing elements, small starting torque, good sealing performance, and strong anti-fouling ability, so that hydraulic single gear pump can work efficiently under harsh working conditions.

3/5/13/14 GPM Hydraulic Single Gear Pump Dimensions Diagram (Unit: mm)

Dimensions of Hydraulic Single Gear Pump, 3600 psi

DisplacementABOil InletOil Outlet
6 mL/ rev105503/4 inch1/2 inch
8.4 mL/ rev10951.5
11 mL/ rev11354
14.5 mL/ rev11957
16.5 mL/ rev12359
19.2 mL/ rev12761
23 mL/ rev13465
25 mL/ rev13766
28 mL/ rev141681 inch3/4 inch
30 mL/ rev14570

Details

Hydraulic Single Gear Pump Details

Tips: Why does the hydraulic single gear pump have internal leakage?

Hydraulic single gear pump internal parts wear and tear will cause internal leakage. Among them, the large leakage area between the floating shaft sleeve and the gear end surface is the main part that cause internal leakage. This part of leakage accounts for about 50% to 70% of the total internal leakage. For the hydraulic single gear pump with internal leakage, its volumetric efficiency drops, and the output power is much lower than the input power. All of its losses are converted into heat, which will cause the hydraulic single gear pump to overheat. If the bonding plane is pressed tightly, a small amount of movement of the floating shaft sleeve during work will cause abrasion. As a result, the oil cylinder will rise slowly or cannot be lifted. Such floating shaft sleeves must be replaced or repaired.

Product reviews
It's a excellent hydraulic single gear pump for the money
5
Ziv
Avatar
7/22/2021 2:41 AM
How can the hydraulic single gear pump last longer?
Was this review helpful? Yes No (0/0)
ATO Responded
Correct installation and reasonable use of gear pumps are important to extend the service life of hydraulic system gear pumps. When the input journal of the gear pump is connected with the motor shaft, the coaxially error should not exceed 0.10mm. It should not be connected with a belt. In addition, the appropriate hydraulic oil should be selected according to the pump operating instructions. Add a filter at the inlet of the gear pump, and regularly filter or replace the hydraulic oil based on the working environment of the hydraulic system.
Can this produce 20 GPM?
5
Shaun
Avatar
3/6/2023 10:55 PM
I'm looking for a hydraulic pump with a min output of 19 GMP at 3600 psi. I saw this one. Can this produce 20 GPM? What are the drive motor requirements?
Was this review helpful? Yes No (0/0)
ATO Responded
1. The maximum displacement is 35ml/rev, if you want to produce 20GPM/Min, the motor speed should be at least 2000-2500 rpm. In fact, 1 US gallon (gallon) = 3785.411784 milliliters (ml), and the correct displacement calculation is Gallon/min = displacement (35ml/rev) * motor speed 2500rpm/ 3785.411784 milliliters.
2.  Motor power = (pressure x displacement x motor revolutions) / 60000
But unfortunately, we do Not provide 2000-2500 RPM 3-phase motors.
What kind of Hydraulic fluid does the pump use
5
Owens
Avatar
11/28/2023 6:48 PM
The pump is running specialized home made equipment we built for seismic data acquisition. What kind of Hydraulic fluid does the pump use?
Was this review helpful? Yes No (0/0)
ATO Responded
For our hydraulic gear pump, we recommend using 46# hydraulic oil.
Only registered users can write reviews