1/2 hp (400 watt) 3-phase gear motor with excellent performance and good price, gear ratio selected in 3~100:1, power supply is available in single phase and 3-phase 110V/220V/380V. The gear reduction motor can cut power off easily when it connects with a brake.
Basic Specification
| Model | ATO-CH22-400 (Ratio:3~10)/ ATO-CH28-400 (Ratio:15~90)/ATO-CH32-400 (Ratio:100~200) |
| Rated Power | 400W (1/2 hp) |
| Rated Voltage | Single-phase 110V, 50/60Hz Single-phase 220V, 50/60Hz 3-phase 220V, 50/60Hz 3-phase 380-415V, 50/60Hz |
| Gear Ratio | 3:1/ 5:1/ 10:1/ 15:1/ 20:1/ 25:1/ 30:1/ 40:1/ 45:1/ 50:1/ 60:1/ 70:1/ 80:1/ 90:1/ 100:1 |
| Working Efficiency | 75% |
| Insulation Grade | Class B, Class F can be customized |
| Protection Grade | IP54 |
| Duty | Continuous running |
| Working Environment | Temperature 10℃~+40℃ Humidity ≤90% |
| Pole | 4P |
| Rated Speed | 1400RPM |
| Working Height | ≤1000m |
| Standard | GB755/IEC-60034 |
| 400W 3 Phase AC Gear Motor Datasheet |
Terminal Box Direction (From Output Shaft)

AC Gear Motor Standard Installation
- All the ATO 3-phase AC gear motors are suitable for this installation method, as shown in the following diagram.
- In the diagram, Q1, Q4, Q7, Q8 are the standard types of oil hole direction. If you need the air hole be on a special position, please contact us to modify the air hole direction.
- In actual use, it is recommended to pull out the oil plug in the air hole to balance the pressure in gearbox.

Details

Tips: How to consider load conditions for 3-phase AC gear motor?
| Load Calculation Precautions | Calculation Example | |||||
| Prime Motor | Conveyor Load Classification | Daily Usage Time | T3 = T2 x K = 5.28 x 1.26 = 6.6 kgf.m | |||
| 0.50 hr | 2 hr | 8-10 hr | 10-24 hr | |||
| Electric Motor | Uniform | 0.80 | 0.90 | 1.00 | 1.25 | |
| Medium Shock | 0.90 | 1.00 | 1.25 | 1.50 | ||
| Heavy Shock | 1.00 | 1.25 | 1.50 | 1.75 | ||
| Corrective Torque = gear motor shaft torque x conefficient | ||||||
Customers who bought this item also bought
1 hp (0.75 kW) VFD, 3 Phase 230V, 400V, 480V
GK3000-4T0007G
$206.49
Favorable price 1 hp (0.75 kW) VFD, three phase 230V/400V/480V 50Hz/60Hz for selection, sensorless vector variable frequency drive, RS485 enabled, strong overload capacity, manufacturer direct sale.
2 hp (1.5 kW) VFD, 3 Phase 240V, 415V, 480V
GK3000-4T0015G
$218.41
Cheap price 2 hp (1.5 kW) VFD, three phase 240V, 415V, 480V for choice, brand new sensorless vector variable frequency drive, RS485 enabled, strong overload capacity, manufacturer direct sale.
Digital Rotary Torque Sensor, 0.1/5/300/1000 Nm to 10000 Nm
ATO-TQS-D03
$939.15
Digital rotary torque sensor with LCD display has the capacity range from 0.1 Nm/0.3 Nm/1 Nm/5 Nm/10 Nm/300 Nm/1000 Nm to 10000 Nm. LCD display can show torque, speed and power value at the same time. Dynamic torque sensor adopts two NSK shafts to ensure starting torque as low as 0.00001 Nm. Rotary torque transducer with 7 pin waterproof circular connector and 3m cable can measure both forward and reverse torque, and then output ±5V/0-10V/4-20mA/RS485 torque signal to PLC.