100W 3-Phase AC Gear Motor, Horizontal, Ratio 3~100

$462.62
Cheap AC gear motor for sale. Rated power 100W, optional power supply 110V/220V/380V (3-phase or single phase), gear ratio 3:1 to 100:1 for selection, output torque 0.16-5.8 kg.m, output shaft diameter 18mm/22mm, installation direction horizontal or vertical. Adding brake for power cutting is available.
SKU: ATO-GEAR-HV100
*
*
*
*
*
*
Free Shipping
Delivery date: 6-12 days

Low price 100W 3-phase AC gear motor has optional gear ratios of 3~100:1, horizontal or vertical mounting is available. A higher gear ratio has a lower output speed (15~570 rpm) and higher torque (0.16-5.8 kg.m).

Basic Specification

ModelATO-CH18-100((Ratio:3~50) , ATO-CH22-100((Ratio:60~200)
Rated Power100W
Rated VoltageSingle-phase 110V, 50/60Hz
Single-phase 220V, 50/60Hz
3-phase 220V, 50/60Hz
3-phase 380-415V, 50/60Hz
Gear Ratio3:1/ 5:1/ 10:1/ 15:1/ 20:1/ 25:1/ 30:1/ 40:1/ 45:1/ 50:1/ 60:1/ 70:1/ 80:1/ 90:1/ 100:1
Working Efficiency75%
Insulation GradeClass B, Class F can be customized
Protection GradeIP54
DutyContinuous running
Working EnvironmentTemperature 10℃~+40℃
Humidity ≤90%
Pole4P (6P)
Working Height≤1000m
StandardGB755/IEC-60034
PDFDownload Attachments100W 3 Phase AC Gear Motor Datasheet

Terminal Box Direction (From Output Shaft)

Terminal Box Direction of 3-Phase AC Gear Motor, Horizontal/vertical

AC Gear Motor Standard Installation

  • All the ATO 3-phase AC gear motors are suitable for this installation method, as shown in the following diagram.
  • In the diagram, Q1, Q4, Q7, Q8 are the standard types of oil hole direction. If you need the air hole be on a special position, please contact us to modify the air hole direction.
  • In actual use, it is recommended to pull out the oil plug in the air hole to balance the pressure in gearbox.

Air hole direction of 3-Phase AC Gear Motor, Horizontal/vertical

Details

100W AC Gear Motor Details

Tips: Gear ratio calculation for 3-phase AC gear motor.

To select the reduction ratio of 3-phase AC gear motor, we use the necessary revolutions number (rpm) of the input shaft and output shaft.

  1. Calculate the rpm of conveyor belt rollers (N1)
    N1 = Conveying speed ÷ (roller diameter × π)
  2. Calculate the output shaft rpm of 3-phase AC gear motor (N2)
    N2 = N1 × (number of sprocket gear ÷ gear number of motor)
  3. Calculate the gear ratio with a 3φ.60Hz motor (i)
    i = the output shaft rpm ÷ the input shaft rpm (motor rpm N)

Calculation example

  1. N1 = V ÷ (D × π) = 9.5 ÷ (0.2×3.14) = 15r/min (rpm)
  2. N1 = N1 × (26/13) = 15 × 2/1 = 30r/min (rpm)
  3. i = N2/N1 = 30/1800 = 1/60 (motor rpm)

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
High quality and good value
5
Noel
Avatar
7/19/2021 12:58 AM
What is the working temperature of this gear motor?
Was this review helpful? Yes No (0/0)
ATO Responded
ATO gear motor can work normally at the temperature of 10℃~+40℃. The high temperature of the gear motor will first demagnetize the magnetic material of the motor, which will lead to the decrease of torque and even to the loss of step. So, the material of the motor is very important. ATO AC gear motor is made of excellent heat dissipation material and equipped with full copper coil, which ensures a long service life.
Runs steady
4
Stella
Avatar
3/22/2026 7:04 PM
We use this motor on our production line conveying equipment. It runs stably with strong torque, low noise, and steady speed.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Low price 100W 3-phase AC gear motor has optional gear ratios of 3~100:1, horizontal or vertical mounting is available. A higher gear ratio has a lower output speed (15~570 rpm) and higher torque (0.16-5.8 kg.m).

Basic Specification

ModelATO-CH18-100((Ratio:3~50) , ATO-CH22-100((Ratio:60~200)
Rated Power100W
Rated VoltageSingle-phase 110V, 50/60Hz
Single-phase 220V, 50/60Hz
3-phase 220V, 50/60Hz
3-phase 380-415V, 50/60Hz
Gear Ratio3:1/ 5:1/ 10:1/ 15:1/ 20:1/ 25:1/ 30:1/ 40:1/ 45:1/ 50:1/ 60:1/ 70:1/ 80:1/ 90:1/ 100:1
Working Efficiency75%
Insulation GradeClass B, Class F can be customized
Protection GradeIP54
DutyContinuous running
Working EnvironmentTemperature 10℃~+40℃
Humidity ≤90%
Pole4P (6P)
Working Height≤1000m
StandardGB755/IEC-60034
PDFDownload Attachments100W 3 Phase AC Gear Motor Datasheet

Terminal Box Direction (From Output Shaft)

Terminal Box Direction of 3-Phase AC Gear Motor, Horizontal/vertical

AC Gear Motor Standard Installation

  • All the ATO 3-phase AC gear motors are suitable for this installation method, as shown in the following diagram.
  • In the diagram, Q1, Q4, Q7, Q8 are the standard types of oil hole direction. If you need the air hole be on a special position, please contact us to modify the air hole direction.
  • In actual use, it is recommended to pull out the oil plug in the air hole to balance the pressure in gearbox.

Air hole direction of 3-Phase AC Gear Motor, Horizontal/vertical

Details

100W AC Gear Motor Details

Tips: Gear ratio calculation for 3-phase AC gear motor.

To select the reduction ratio of 3-phase AC gear motor, we use the necessary revolutions number (rpm) of the input shaft and output shaft.

  1. Calculate the rpm of conveyor belt rollers (N1)
    N1 = Conveying speed ÷ (roller diameter × π)
  2. Calculate the output shaft rpm of 3-phase AC gear motor (N2)
    N2 = N1 × (number of sprocket gear ÷ gear number of motor)
  3. Calculate the gear ratio with a 3φ.60Hz motor (i)
    i = the output shaft rpm ÷ the input shaft rpm (motor rpm N)

Calculation example

  1. N1 = V ÷ (D × π) = 9.5 ÷ (0.2×3.14) = 15r/min (rpm)
  2. N1 = N1 × (26/13) = 15 × 2/1 = 30r/min (rpm)
  3. i = N2/N1 = 30/1800 = 1/60 (motor rpm)
Product reviews
High quality and good value
5
Noel
Avatar
7/19/2021 12:58 AM
What is the working temperature of this gear motor?
Was this review helpful? Yes No (0/0)
ATO Responded
ATO gear motor can work normally at the temperature of 10℃~+40℃. The high temperature of the gear motor will first demagnetize the magnetic material of the motor, which will lead to the decrease of torque and even to the loss of step. So, the material of the motor is very important. ATO AC gear motor is made of excellent heat dissipation material and equipped with full copper coil, which ensures a long service life.
Runs steady
4
Stella
Avatar
3/22/2026 7:04 PM
We use this motor on our production line conveying equipment. It runs stably with strong torque, low noise, and steady speed.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews