Turbidity Sensor for Water Quality, 0~1000NTU

$1,016.59
Buy an ATO turbidity sensor for water quality, which provides precise turbidity measurements using a 90° scattered light method with built-in temperature compensation (Pt1000). It supports a range of 01000 NTU with resolutions as fine as 0.01 NTU and a fast response time (<30 seconds). Ideal for water treatment, environmental monitoring, and aquaculture.
SKU: ATO-WQS-TS
*
Free Shipping
Delivery date: 6-12 days

The turbidity sensor measures turbidity with high accuracy (±5% or ±3 NTU) using a 90° scattered light method and built-in temperature compensation. It features fast response (<30s), RS485 communication, and IP68 protection for use in harsh environments up to 20 meters deep. Ideal for water treatment, environmental monitoring, and aquaculture, it offers easy installation and low power consumption (0.2W at 12V).

Specification

Model ATO-ZS-206A
Measurement Principle Scattered Light Method
Measurement Range/Resolution 0~20.00 NTU, 0.01 NTU/0.1°C
0~100.00 NTU, 0.1 NTU/0.1°C
0~1000.00 NTU, 1 NTU/0.1°C
Product Accuracy ±5% or ±3 NTU (0~1000.00 NTU)
±3% or ±2 NTU (0~100.00 NTU)
±3% or ±1.5 NTU (0~20.00 NTU) or ±0.3°C
Response Time (T90) <30 seconds
Minimum Detection Limit 0.01 NTU (0~20 NTU) or 0.3 NTU
Calibration Method Two-Point Calibration
Temperature Compensation Automatic (Pt1000)
Output Signal RS485 (Modbus/RTU)
Operating Conditions 0~50°C, <0.2MPa
Storage Conditions -5~65°C
Housing Material POM, ABS
Installation Method Immersion Installation, 3/4 NPT Pipe Thread
Cable Length 5 meters (customizable)
Power Consumption 0.2W @ 12V
Power Supply 12~24VDC
Protection Rating IP68


Feature

  • Advanced Measurement Principle: Utilizes a 90° scattered light method with a built-in temperature sensor for accurate turbidity and temperature measurements.
  • RS485 Communication with Modbus/RTU Protocol: Supports seamless integration into monitoring systems with reliable and standardized communication.
  • Robust Optical Structure: Features enhanced resistance to interference from ambient light, ensuring stable and accurate readings.
  • Infrared LED Light Source: Equipped with a stable infrared LED, providing consistent performance and long service life.
  • IP68 Protection Rating: Fully waterproof design, capable of operating at depths of up to 20 meters, making it suitable for challenging water environments.
  • Convenience and Reliability: Designed for easy installation, fast setup, stable operation, and minimal maintenance requirements.

Dimension (Unit: mm)

Turbidity sensor for water quality size

Note: The sensor connector is a male M16-5 pole waterproof connector.

Installation Method

Turbidity sensor for water quality installation method

A B C
Sidewall Mount Top Flange Mount Pipe Turning Mount
D E F
Pipe Turning Mount Flow-through Mount Submersible Mount


Application

Turbidity sensor for water quality application

Tips: How does the 90° scattered light method work in the turbidity sensor?

The 90° scattered light method used in turbidity sensors measures suspended particles in water by emitting a light beam, typically from an infrared LED, into the water. Suspended particles scatter the light, and a photodetector positioned at a 90° angle captures the scattered light, minimizing interference from the direct light source. The intensity of the scattered light is proportional to the turbidity, and the sensor processes this signal into a turbidity measurement, expressed in NTU. A built-in temperature sensor (Pt1000) compensates for temperature effects, ensuring accurate and consistent results. This method is effective due to its sensitivity to small particles, reduced interference, and reliability, making it ideal for applications in water quality monitoring and treatment.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

The turbidity sensor measures turbidity with high accuracy (±5% or ±3 NTU) using a 90° scattered light method and built-in temperature compensation. It features fast response (<30s), RS485 communication, and IP68 protection for use in harsh environments up to 20 meters deep. Ideal for water treatment, environmental monitoring, and aquaculture, it offers easy installation and low power consumption (0.2W at 12V).

Specification

Model ATO-ZS-206A
Measurement Principle Scattered Light Method
Measurement Range/Resolution 0~20.00 NTU, 0.01 NTU/0.1°C
0~100.00 NTU, 0.1 NTU/0.1°C
0~1000.00 NTU, 1 NTU/0.1°C
Product Accuracy ±5% or ±3 NTU (0~1000.00 NTU)
±3% or ±2 NTU (0~100.00 NTU)
±3% or ±1.5 NTU (0~20.00 NTU) or ±0.3°C
Response Time (T90) <30 seconds
Minimum Detection Limit 0.01 NTU (0~20 NTU) or 0.3 NTU
Calibration Method Two-Point Calibration
Temperature Compensation Automatic (Pt1000)
Output Signal RS485 (Modbus/RTU)
Operating Conditions 0~50°C, <0.2MPa
Storage Conditions -5~65°C
Housing Material POM, ABS
Installation Method Immersion Installation, 3/4 NPT Pipe Thread
Cable Length 5 meters (customizable)
Power Consumption 0.2W @ 12V
Power Supply 12~24VDC
Protection Rating IP68


Feature

  • Advanced Measurement Principle: Utilizes a 90° scattered light method with a built-in temperature sensor for accurate turbidity and temperature measurements.
  • RS485 Communication with Modbus/RTU Protocol: Supports seamless integration into monitoring systems with reliable and standardized communication.
  • Robust Optical Structure: Features enhanced resistance to interference from ambient light, ensuring stable and accurate readings.
  • Infrared LED Light Source: Equipped with a stable infrared LED, providing consistent performance and long service life.
  • IP68 Protection Rating: Fully waterproof design, capable of operating at depths of up to 20 meters, making it suitable for challenging water environments.
  • Convenience and Reliability: Designed for easy installation, fast setup, stable operation, and minimal maintenance requirements.

Dimension (Unit: mm)

Turbidity sensor for water quality size

Note: The sensor connector is a male M16-5 pole waterproof connector.

Installation Method

Turbidity sensor for water quality installation method

A B C
Sidewall Mount Top Flange Mount Pipe Turning Mount
D E F
Pipe Turning Mount Flow-through Mount Submersible Mount


Application

Turbidity sensor for water quality application

Tips: How does the 90° scattered light method work in the turbidity sensor?

The 90° scattered light method used in turbidity sensors measures suspended particles in water by emitting a light beam, typically from an infrared LED, into the water. Suspended particles scatter the light, and a photodetector positioned at a 90° angle captures the scattered light, minimizing interference from the direct light source. The intensity of the scattered light is proportional to the turbidity, and the sensor processes this signal into a turbidity measurement, expressed in NTU. A built-in temperature sensor (Pt1000) compensates for temperature effects, ensuring accurate and consistent results. This method is effective due to its sensitivity to small particles, reduced interference, and reliability, making it ideal for applications in water quality monitoring and treatment.

Only registered users can write reviews
Customers who bought this item also bought

4 Electrode Electrical Conductivity (EC) Sensor, 0.1~500ms/cm

ATO-CS-CON620D
$616.46
High-quality 4 electrode electrical conductivity (EC) sensors are suitable for measuring the changes in conductivity values in aqueous solution systems within a wide range. The conductivity measurement range is 0.1~500ms/cm, and the salinity measurement range is 0~500ppt. The digital electrical conductivity (EC) sensor has high accuracy and stable performance. The conductivity measurement accuracy is 1.5%F.S and the temperature measurement accuracy is ±0.5℃.

Chloride Sensor for Water Quality, 1.8~35,500 ppm

ATO-WQS-ICL
$584.56
Selling competitively priced chloride sensor for water quality. The chloride water quality sensor measures from 1.8 to 35,500 ppm with a resolution of 0.01 ppm and an accuracy of ±3% FS. It has automatic temperature compensation and supports online monitoring. Application for river water, domestic plant root exudates, soil extract, blood, blood electrolyte, bedside analysis, biological fluids, sludge, electroplating.

Sodium Sensor for Water Quality, 0.2~100,000ppm

ATO-WQS-INA
$585.46
High quality sodium sensor for water quality, test range of 0.2~100,000ppm for sale online. It supports RS485 signal output, low voltage power supply and power consumption <0.5W. Sodium ion water quality sensors are also capable of testing temperature, with a measurement range of -10°C to 110°C. For use in mineral water drinking water, industrial circulation, wastewater, seawater, soil, food, biological fluids, blood.

RTD Pt100 to 4-20mA/RS485 Converter

ATO-RTD-M1
$76.82
Higher quality RTD Pt100 to 4-20mA/RS485 converter for sale, supports measurement ranges up to -50~500°C or -200~50°C. It converts Pt100 resistance signals into 4-20mA or RS485 outputs, operating on 12~36VDC power. With high accuracy (±0.1% FS or ±0.2°C), a fast 20ms response time, and excellent stability (±0.05% FS/year), it ensures reliable performance. With IP54 protection and an operating temperature range of -40~80°C. Ideal for precise and durable industrial temperature monitoring.

ORP Sensor for Water Quality, -1500~+1500mV

ATO-WQS-ORP
$650.79
Good ORP sensor for water quality for sale, measures -1500 to +1500mV with 1mV resolution and ±6mV accuracy. It operates at 0~65°C, <0.1MPa, and uses a 12~24VDC power supply with 0.2W consumption. Featuring a durable POM housing, RS-485/4-20mA output, IP68 protection, and a 5-meter customizable cable, it is installed via immersion and uses single-point calibration. Ideal for environmental monitoring, water treatment, agriculture, industrial automation, and marine applications.