Tension Force Sensor for Fiber/Cable, 10N-500N

$192.47
Higher quality tension force sensor for fiber and cable sold at a discount can measure tension of 10N, 20N, 30N, 50N, 100N, 200N, and 500N, with an output sensitivity of 1.0 ± 0.05 mV/V and a zero output accuracy of ±1% F.S. Force measuring load cells supports a maximum load of 300% R.C. and a cable pulling limit of 98N. Suitable for fiber optics, cables, and belts.
SKU: ATO-FS-TFS500
*
*
*
Free Shipping
Delivery date: 6-12 days

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

This high-quality tension force sensor measures forces ranging from 10N to 500N with an output sensitivity of 1.0 ± 0.05 mV/V and zero output accuracy of ±1% F.S. It supports a maximum load of 300% R.C. and a cable pulling limit of 98N. Ideal for use with fiber optics, cables, and belts.

The force measuring load cell itself outputs a mv signal, which is too small to be used directly and needs to be passed through an amplifier or an instrument before it can be used. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Specification

ModelATO-DYZHL
Measuring Range10N-500N
Matched TransmitterATO-LCTR-OA (Click it to the transmitter page)
Matched Display ControllerATO-DPM-DY800 (Click it to the controller page)
Output Sensitivity1.0 ± 0.05 mV/V
Zero Output±1%F.S.
Non-linearity±0.2%F.S.
Full Scale±0.2%F.S.
Hysteresis±0.2%F.S.
Drift (30 min)±0.3%F.S.
Temperature Sensitivity0.1%F.S./10°C
Zero Temperature Drift0.1%F.S./10°C
Response Frequency1 kHz
Material42CrMoA
Resistance350 Ω
Insulation Resistance≥5000 MΩ/100V DC
Operating Voltage5-15 V
Working Temperature Range-20°C to 80°C
Safety Load≤150%R.C.
Max Load≤300%R.C.
Cable SpecificationsΦ5*3m
Cable Pulling Limit98N
TEDSOptional (Contact customer service)


Feature

  • Easy Installation & Stable Signal: Easy to install with stable signal performance, ideal for dynamic tension measurement of fibers, cables, and belts.
  • Waterproof Connector: Features a 6-sided waterproof connector, preventing damage and ensuring stable signal transmission in various conditions.
  • Durable Stainless Steel: Made from high-quality stainless steel, resistant to high temperatures, wear, and corrosion, offering long-lasting durability.
  • High Flexibility & Strength: Designed to resist elongation and maintain strength, ensuring reliable performance over time.
  • Wide Application: Suitable for measuring tension in various materials like fiber optics, cables, and belts.

Dimension (unit: mm)

Tension force sensor for fiber cable size

Wiring Method

Load cell wiring

Tips: What is the response frequency of the sensor, and why is it important?

The sensor has a response frequency of 1 kHz, which means it can provide tension readings at a frequency of up to 1000 times per second. This is particularly important for measuring dynamic forces, as the sensor can quickly detect and record changes in tension over time. For example, in processes where the tension fluctuates rapidly, such as in cable manufacturing or during material testing, the sensor’s high response frequency ensures that it captures the real-time force variations accurately. This makes the sensor suitable for high-speed applications where precise, continuous tension measurements are required.

In this video, we've shown you how to calibrate the weight transmitter Model 610 by ATO using a compression load cell so that you can make sure you get the most accurate readings possible in your measurement.

This video explains the six main considerations as to the selection of load cells for different jobs. These factors are application, operating environment, types of material and sealing techniques, capacity/resolution requirements and output signal types. Hope this video will be helpful and get you prepared for the initial discussion with technical personnel during the selecting process.

In this video, ATO offers a variety of load cells and weigh modules designed for your applications.

Product reviews
Accurate and stable
5
Amari
Avatar
5/8/2025 2:59 AM
This tension force sensor for fiber/cable is sensitive to response, accurate in readings, and can continuously and stably monitor tiny tension changes, which is very helpful in improving product quality. The installation process was also smooth, the interface design was reasonable, and there was almost no obstacle to matching our existing control system. After using it for a period of time, there was basically no drift or interference.
Was this review helpful? Yes No (0/0)
Sensor range
5
Oralun
Avatar
6/29/2025 8:00 PM
Hello, do you offer similar products with a range lower than 10N?
Was this review helpful? Yes No (0/0)
ATO Responded
Please let us know the measuring range (unit: N) of the fiber/cable tension sensor you need, and we will recommend a suitable product for you.
Arbor Size
4
Heluo
Avatar
8/14/2025 9:09 PM
Could you please tell me the arbor size of this fiber optic cable tension sensor (range 10N-500N)?
Was this review helpful? Yes No (0/0)
ATO Responded
The arbor size of this tension force sensor is φ10h6 (10mm arbor diameter with tolerance grade H6).
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

This high-quality tension force sensor measures forces ranging from 10N to 500N with an output sensitivity of 1.0 ± 0.05 mV/V and zero output accuracy of ±1% F.S. It supports a maximum load of 300% R.C. and a cable pulling limit of 98N. Ideal for use with fiber optics, cables, and belts.

The force measuring load cell itself outputs a mv signal, which is too small to be used directly and needs to be passed through an amplifier or an instrument before it can be used. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Specification

ModelATO-DYZHL
Measuring Range10N-500N
Matched TransmitterATO-LCTR-OA (Click it to the transmitter page)
Matched Display ControllerATO-DPM-DY800 (Click it to the controller page)
Output Sensitivity1.0 ± 0.05 mV/V
Zero Output±1%F.S.
Non-linearity±0.2%F.S.
Full Scale±0.2%F.S.
Hysteresis±0.2%F.S.
Drift (30 min)±0.3%F.S.
Temperature Sensitivity0.1%F.S./10°C
Zero Temperature Drift0.1%F.S./10°C
Response Frequency1 kHz
Material42CrMoA
Resistance350 Ω
Insulation Resistance≥5000 MΩ/100V DC
Operating Voltage5-15 V
Working Temperature Range-20°C to 80°C
Safety Load≤150%R.C.
Max Load≤300%R.C.
Cable SpecificationsΦ5*3m
Cable Pulling Limit98N
TEDSOptional (Contact customer service)


Feature

  • Easy Installation & Stable Signal: Easy to install with stable signal performance, ideal for dynamic tension measurement of fibers, cables, and belts.
  • Waterproof Connector: Features a 6-sided waterproof connector, preventing damage and ensuring stable signal transmission in various conditions.
  • Durable Stainless Steel: Made from high-quality stainless steel, resistant to high temperatures, wear, and corrosion, offering long-lasting durability.
  • High Flexibility & Strength: Designed to resist elongation and maintain strength, ensuring reliable performance over time.
  • Wide Application: Suitable for measuring tension in various materials like fiber optics, cables, and belts.

Dimension (unit: mm)

Tension force sensor for fiber cable size

Wiring Method

Load cell wiring

Tips: What is the response frequency of the sensor, and why is it important?

The sensor has a response frequency of 1 kHz, which means it can provide tension readings at a frequency of up to 1000 times per second. This is particularly important for measuring dynamic forces, as the sensor can quickly detect and record changes in tension over time. For example, in processes where the tension fluctuates rapidly, such as in cable manufacturing or during material testing, the sensor’s high response frequency ensures that it captures the real-time force variations accurately. This makes the sensor suitable for high-speed applications where precise, continuous tension measurements are required.

Product reviews
Accurate and stable
5
Amari
Avatar
5/8/2025 2:59 AM
This tension force sensor for fiber/cable is sensitive to response, accurate in readings, and can continuously and stably monitor tiny tension changes, which is very helpful in improving product quality. The installation process was also smooth, the interface design was reasonable, and there was almost no obstacle to matching our existing control system. After using it for a period of time, there was basically no drift or interference.
Was this review helpful? Yes No (0/0)
Sensor range
5
Oralun
Avatar
6/29/2025 8:00 PM
Hello, do you offer similar products with a range lower than 10N?
Was this review helpful? Yes No (0/0)
ATO Responded
Please let us know the measuring range (unit: N) of the fiber/cable tension sensor you need, and we will recommend a suitable product for you.
Arbor Size
4
Heluo
Avatar
8/14/2025 9:09 PM
Could you please tell me the arbor size of this fiber optic cable tension sensor (range 10N-500N)?
Was this review helpful? Yes No (0/0)
ATO Responded
The arbor size of this tension force sensor is φ10h6 (10mm arbor diameter with tolerance grade H6).
Only registered users can write reviews
Customers who bought this item also bought

Vortex Flow Sensor, 0.5-150 L/min, DN6/DN10/DN20/DN25

ATO-FS-AFD2
$91.61
Good vortex flow sensor for sale, available in pipe diameters of DN6, DN10, DN20, and DN25 as optional configurations, offers a versatile measurement range of 0.5~10 L/min, 1.8~32 L/min, 5~85 L/min, and 9~150 L/min. It can withstand a maximum pressure of 1 MPa, voltage range of 11.4~25.2V. Widely used in water heaters, HVAC flow detection, heat recovery systems, medical fluid flow detection systems.