Solid state relay, 3 phase, SSR-100AA, 100A 70-280V AC to AC

$129.23
Low cost and high quality SSR-100AA, 3 phase solid state relay, 100 Amp load current, AC control AC, input voltage 70-280V AC, load voltage 24-480V AC, LED indicator, panel mount, high reliability and good performance.
SKU: ATO-SSR-TH100AA
*
Free Shipping
Delivery date: 6-12 days

Features

100A 3-phase solid state relay (SSR) can control 24-480V AC load with 70-280V AC with high structural strength, good impact resistance, and strong shock resistance. The SSR relay offers a reliable switching the commercial and industrial loads, such as computer peripheral interface device, printing machine, molding machine, food machine, packaging machine, and so on.

  • Built in RC absorption
  • Photoelectric isolation
  • SCR output
  • LED indicator for operation status
  • Removable protective cover for safety
  • Panel mount
  • Zero-crossing switch type

Specification

ModelATO-SSR-TH100AA
InputControl voltage range70-280V AC
Max. input current20mA
Must operate voltage70V AC
Must release voltage50V AC
OutputLoad voltage range24-480V AC
Peak voltage800V AC
Maximum load current100A
Maximum off-state leakage current8mA
Maximum off-state time10mS
Maximum on-state voltage drop1.5V
GeneralTypeAC to AC, 3 phase
Dimension L – W – H (mm)105х74.8х33
Weight500g
Dielectric strength (input to output)4000V
Dielectric strength (input, output to the base)2500V
Operating temperature-20℃~ 80℃
MountPanel
CertificationCE

Note:

  1. When the load is a resistive load, the maximum load current of the selected SSR should be 2~3 times greater than the actual load current;
  2. When the load is an inductive load, the maximum load current of the selected SSR should be more than 7~8 times the actual load current.
  3. When the maximum load current is higher than 10A, a heat sink must be installed to the solid state relay, or the SSR relay should be mounted on a metal base plate with heat dissipation effect, and the thermal grease is applied between them.

Heat Sink

Product NameHeat sink for 3 phase SSRSSR 150Amp heat sink dimension
MaterialAluminum alloy
Dimension (L*W*H)150*125*135mm
Mounting SizeMounting Hole Diameter: 3mm
Groove Distance: 84mm
Weight2.1kg
Application≤150A 3 phase solid state relay

Dimensions (Unit: mm)

3-phase SSR Relay Dimensions

Wiring Diagram

3-phase 70-280V AC to AC SSR Wiring Diagram

Tips: SSR relay-ordinary type of Triac output and enhanced type of unidirectional SCR anti-parallel output

In the case of inductive load, when the solid state relay is turned off by the on-state, a large voltage rise rate dv/dt (commutation dv/dt) will be generated at both ends of the triac due to inconsistent phase of current and voltage. The value exceeding the triac's commutation dv/dt (typically 10V/μs) will lead to delayed turn-off, or even failure. However, the unidirectional triac is unipolar and only affected by satic voltage rising rate dv/dt (typical value 100V/μs). The commutation dv/dt of ordinary type SSR formed by only triac has been greatly improved compared to enhanced SSR composed of two unidirectional SCR in anti-parallel, so the enhanced SSR should be selected in inductive or capacitive load field.

3 Phase Solid State Relay DC/AC Controlled AC

This introductory video covers the specifications and features of the ATO 3 Phase SSR models. Capable of switching at zero voltage or instantaneous turn-on, these models feature back-to-back thyristor outputs and are suitable for working resistive, inductive and capacitive loads. The control voltage for this line is 3-32V DC or 70-280V AC. Load current ratings range from 10 to 120A with nominal output voltages up to 480V AC.

How to Choose the Right Solid State Relay?

In this video, we discuss the key considerations for choosing the right solid state relay.

Product reviews
What capacity the relay would be?
5
Walter
Avatar
4/22/2020 6:52 PM
I want to use a solid state relay to run my motor with 40A rated and 100A inrush current. What capacity the relay would be?
Was this review helpful? Yes No (0/0)
ATO Responded
For the motor with 100A inrush current, the solid sate relay current should be 100A or higher, Not 40A.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

100A 3-phase solid state relay (SSR) can control 24-480V AC load with 70-280V AC with high structural strength, good impact resistance, and strong shock resistance. The SSR relay offers a reliable switching the commercial and industrial loads, such as computer peripheral interface device, printing machine, molding machine, food machine, packaging machine, and so on.

  • Built in RC absorption
  • Photoelectric isolation
  • SCR output
  • LED indicator for operation status
  • Removable protective cover for safety
  • Panel mount
  • Zero-crossing switch type

Specification

ModelATO-SSR-TH100AA
InputControl voltage range70-280V AC
Max. input current20mA
Must operate voltage70V AC
Must release voltage50V AC
OutputLoad voltage range24-480V AC
Peak voltage800V AC
Maximum load current100A
Maximum off-state leakage current8mA
Maximum off-state time10mS
Maximum on-state voltage drop1.5V
GeneralTypeAC to AC, 3 phase
Dimension L – W – H (mm)105х74.8х33
Weight500g
Dielectric strength (input to output)4000V
Dielectric strength (input, output to the base)2500V
Operating temperature-20℃~ 80℃
MountPanel
CertificationCE

Note:

  1. When the load is a resistive load, the maximum load current of the selected SSR should be 2~3 times greater than the actual load current;
  2. When the load is an inductive load, the maximum load current of the selected SSR should be more than 7~8 times the actual load current.
  3. When the maximum load current is higher than 10A, a heat sink must be installed to the solid state relay, or the SSR relay should be mounted on a metal base plate with heat dissipation effect, and the thermal grease is applied between them.

Heat Sink

Product NameHeat sink for 3 phase SSRSSR 150Amp heat sink dimension
MaterialAluminum alloy
Dimension (L*W*H)150*125*135mm
Mounting SizeMounting Hole Diameter: 3mm
Groove Distance: 84mm
Weight2.1kg
Application≤150A 3 phase solid state relay

Dimensions (Unit: mm)

3-phase SSR Relay Dimensions

Wiring Diagram

3-phase 70-280V AC to AC SSR Wiring Diagram

Tips: SSR relay-ordinary type of Triac output and enhanced type of unidirectional SCR anti-parallel output

In the case of inductive load, when the solid state relay is turned off by the on-state, a large voltage rise rate dv/dt (commutation dv/dt) will be generated at both ends of the triac due to inconsistent phase of current and voltage. The value exceeding the triac's commutation dv/dt (typically 10V/μs) will lead to delayed turn-off, or even failure. However, the unidirectional triac is unipolar and only affected by satic voltage rising rate dv/dt (typical value 100V/μs). The commutation dv/dt of ordinary type SSR formed by only triac has been greatly improved compared to enhanced SSR composed of two unidirectional SCR in anti-parallel, so the enhanced SSR should be selected in inductive or capacitive load field.

Product reviews
What capacity the relay would be?
5
Walter
Avatar
4/22/2020 6:52 PM
I want to use a solid state relay to run my motor with 40A rated and 100A inrush current. What capacity the relay would be?
Was this review helpful? Yes No (0/0)
ATO Responded
For the motor with 100A inrush current, the solid sate relay current should be 100A or higher, Not 40A.
Only registered users can write reviews