Solid state relay, 3 phase, SSR-10AA, 10A 70-280V AC to AC

$75.23
Low price 3-phase solid state relay, SSR-10AA, input voltage 70-280V AC, load current 10 amp and load voltage 24-480V AC, panel mount, LED indicator, high quality and long lifespan.
SKU: ATO-SSR-TH10AA

Features

10A 3-phase solid state relay (SSR) with 70-280V AC to 24-480V AC features high structural strength, good impact resistance, and strong shock resistance. The SSR offers a reliable switching the commercial and industrial loads, such as computer peripheral interface device, printing machine, molding machine, food machine, packaging machine, and so on.

  • Built in RC absorption
  • Photoelectric isolation
  • SCR output
  • LED indicator for operation status
  • Removable protective cover for safety
  • Panel mount
  • Zero-crossing switch type

Specification

ModelATO-SSR-TH10AA
InputControl voltage range70-280V AC
Max. input current20mA
Must operate voltage70V AC
Must release voltage50V AC
OutputLoad voltage range24-480V AC
Peak voltage800V AC
Maximum load current10A
Maximum off-state leakage current8mA
Maximum off-state time10mS
Maximum on-state voltage drop1.5V
GeneralTypeAC to AC, 3 phase
Dimension L – W – H (mm)105х74.8х33
Weight500g
Dielectric strength (input to output)4000V
Dielectric strength (input, output to the base)2500V
Operating temperature-20℃~ 80℃
MountPanel
CertificationCE

Note:

  1. When the load is a resistive load, the maximum load current of the selected SSR should be 2~3 times greater than the actual load current;
  2. When the load is an inductive load, the maximum load current of the selected SSR should be more than 7~8 times the actual load current.
  3. When the maximum load current is higher than 10A, a heat sink must be installed to the solid state relay, or the SSR relay should be mounted on a metal base plate with heat dissipation effect, and the thermal grease is applied between them.

Dimensions (Unit: mm)

3-phase SSR Relay Dimensions

Wiring Diagram

3-phase 70-280V AC to AC SSR Wiring Diagram

Tips: How to choose a solid state relay for different loads?

It is not be a problem to choose a suitable solid state relay (SSR) for normal loads, but special load conditions must also be considered so that excessive impact current and overvoltage as well as unnecessary damages caused to device performance are avoided. The feature of cold-state resistance of filament lamps, electric furnaces, etc. result in surge current at the turn-on moment, which is several times higher than the rated working current value. Generally, ordinary-type solid state relays may work properly at the point of 2/3 of its rated current value. Enhanced solid state relays may be selected according to the parameters provided by the manufacturer. In the harsh conditions such as industrial control sites, it is recommended to leave enough voltage and current margin.

3 Phase Solid State Relay DC/AC Controlled AC

This introductory video covers the specifications and features of the ATO 3 Phase SSR models. Capable of switching at zero voltage or instantaneous turn-on, these models feature back-to-back thyristor outputs and are suitable for working resistive, inductive and capacitive loads. The control voltage for this line is 3-32V DC or 70-280V AC. Load current ratings range from 10 to 120A with nominal output voltages up to 480V AC.

How to Choose the Right Solid State Relay?

In this video, we discuss the key considerations for choosing the right solid state relay.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

10A 3-phase solid state relay (SSR) with 70-280V AC to 24-480V AC features high structural strength, good impact resistance, and strong shock resistance. The SSR offers a reliable switching the commercial and industrial loads, such as computer peripheral interface device, printing machine, molding machine, food machine, packaging machine, and so on.

  • Built in RC absorption
  • Photoelectric isolation
  • SCR output
  • LED indicator for operation status
  • Removable protective cover for safety
  • Panel mount
  • Zero-crossing switch type

Specification

ModelATO-SSR-TH10AA
InputControl voltage range70-280V AC
Max. input current20mA
Must operate voltage70V AC
Must release voltage50V AC
OutputLoad voltage range24-480V AC
Peak voltage800V AC
Maximum load current10A
Maximum off-state leakage current8mA
Maximum off-state time10mS
Maximum on-state voltage drop1.5V
GeneralTypeAC to AC, 3 phase
Dimension L – W – H (mm)105х74.8х33
Weight500g
Dielectric strength (input to output)4000V
Dielectric strength (input, output to the base)2500V
Operating temperature-20℃~ 80℃
MountPanel
CertificationCE

Note:

  1. When the load is a resistive load, the maximum load current of the selected SSR should be 2~3 times greater than the actual load current;
  2. When the load is an inductive load, the maximum load current of the selected SSR should be more than 7~8 times the actual load current.
  3. When the maximum load current is higher than 10A, a heat sink must be installed to the solid state relay, or the SSR relay should be mounted on a metal base plate with heat dissipation effect, and the thermal grease is applied between them.

Dimensions (Unit: mm)

3-phase SSR Relay Dimensions

Wiring Diagram

3-phase 70-280V AC to AC SSR Wiring Diagram

Tips: How to choose a solid state relay for different loads?

It is not be a problem to choose a suitable solid state relay (SSR) for normal loads, but special load conditions must also be considered so that excessive impact current and overvoltage as well as unnecessary damages caused to device performance are avoided. The feature of cold-state resistance of filament lamps, electric furnaces, etc. result in surge current at the turn-on moment, which is several times higher than the rated working current value. Generally, ordinary-type solid state relays may work properly at the point of 2/3 of its rated current value. Enhanced solid state relays may be selected according to the parameters provided by the manufacturer. In the harsh conditions such as industrial control sites, it is recommended to leave enough voltage and current margin.

Only registered users can write reviews