Solid state relay, 3 phase, SSR-10DA, 10A 3-32V DC to AC

$70.62
SSR-10DA solid state relay, 3-phase 10 Amp DC to AC SSR, control voltage 3-32V DC, load voltage 24-480V AC, zero crossing, fast switching speed, high reliability and long lifespan.
SKU: ATO-SSR-TH10DA
Free Shipping
Delivery date: 6-12 days

Features

10A 3-phase 3-32V DC to AC solid state relay (SSR) features compact size, high structural strength, good impact resistance, and strong shock resistance. The SSR offers a reliable switching the commercial and industrial loads, such as computer peripheral interface device, printing machine, molding machine, food machine, packaging machine, and so on.

  • Built in RC absorption
  • Photoelectric isolation
  • SCR output
  • LED indicator for operation status
  • Removable protective cover for safety
  • Panel mount
  • Zero-crossing switch type

Specification

ModelATO-SSR-TH10DA
InputControl voltage range3-32V DC
Max. input current20mA
Must operate voltage4V DC
Must release voltage2.7V DC
OutputLoad voltage range24-480V AC
Peak voltage800V AC
Maximum load current10A
Maximum off-state leakage current8mA
Maximum off-state time10mS
Maximum on-state voltage drop1.5V
GeneralTypeDC to AC, 3 phase
Dimension L – W – H (mm)105х74.8х33
Weight500g
Dielectric strength (input to output)4000V
Dielectric strength (input, output to the base)2500V
Operating temperature-20℃~ 80℃
MountPanel
CertificationCE

Note:

  1. When the load is a resistive load, the maximum load current of the selected SSR should be 2~3 times greater than the actual load current;
  2. When the load is an inductive load, the maximum load current of the selected SSR should be more than 7~8 times the actual load current.
  3. When the maximum load current is higher than 10A, a heat sink must be installed to the solid state relay, or the SSR relay should be mounted on a metal base plate with heat dissipation effect, and the thermal grease is applied between them.

Dimensions (Unit: mm)

3-phase SSR Relay Dimensions

Wiring Diagram

3-phase 3-32V DC to AC SSR Wiring Diagram

Tips: How to use solid state relays in three-phase current control?

The easiest way is to use two solid state relays for motor’s on-off control, four for commutation control, and the third phase is not controlled. For a motor, it should be noted that, due to motor inertia, its commutation must be conducted after it comes to a standstill in case of similar motor stalling, which may cause a great impact voltage and current. In the design of the control circuit, pay attention to the possibility that the commutating solid state relay is turned on, and it is forbidden at any moment. As for power sequence, power supply of control circuit should be turned off later if added first while the power supply of electrical machinery should be turned off first if added later. Inverters should not be simply adopted to connect commutating SSRs in case of phase fault caused by the phenomenon that the turned-on solid state relay has not been turned off yet while another phase of SSR is already turned on. In addition, fuses, phase loss and temperature relays involved in the motor control are also protection devices to ensure normal operation of the system.

3 Phase Solid State Relay DC/AC Controlled AC

This introductory video covers the specifications and features of the ATO 3 Phase SSR models. Capable of switching at zero voltage or instantaneous turn-on, these models feature back-to-back thyristor outputs and are suitable for working resistive, inductive and capacitive loads. The control voltage for this line is 3-32V DC or 70-280V AC. Load current ratings range from 10 to 120A with nominal output voltages up to 480V AC.

How to Choose the Right Solid State Relay?

In this video, we discuss the key considerations for choosing the right solid state relay.

Product reviews
Reliable and Efficient 3-Phase Solid State Relay
5
Iris
Avatar
10/21/2025 9:02 PM
I’ve been using the SSR-10DA solid state relay in a 3-phase control system for several months, and it’s been extremely reliable. The switching speed is fast and consistent, and the zero-crossing feature helps reduce electrical noise and extend equipment life. It handles 10 amps easily without overheating, and installation was straightforward. The build quality feels solid, and performance has been stable under continuous operation. Excellent value for anyone looking for a dependable DC to AC relay with long service life.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

10A 3-phase 3-32V DC to AC solid state relay (SSR) features compact size, high structural strength, good impact resistance, and strong shock resistance. The SSR offers a reliable switching the commercial and industrial loads, such as computer peripheral interface device, printing machine, molding machine, food machine, packaging machine, and so on.

  • Built in RC absorption
  • Photoelectric isolation
  • SCR output
  • LED indicator for operation status
  • Removable protective cover for safety
  • Panel mount
  • Zero-crossing switch type

Specification

ModelATO-SSR-TH10DA
InputControl voltage range3-32V DC
Max. input current20mA
Must operate voltage4V DC
Must release voltage2.7V DC
OutputLoad voltage range24-480V AC
Peak voltage800V AC
Maximum load current10A
Maximum off-state leakage current8mA
Maximum off-state time10mS
Maximum on-state voltage drop1.5V
GeneralTypeDC to AC, 3 phase
Dimension L – W – H (mm)105х74.8х33
Weight500g
Dielectric strength (input to output)4000V
Dielectric strength (input, output to the base)2500V
Operating temperature-20℃~ 80℃
MountPanel
CertificationCE

Note:

  1. When the load is a resistive load, the maximum load current of the selected SSR should be 2~3 times greater than the actual load current;
  2. When the load is an inductive load, the maximum load current of the selected SSR should be more than 7~8 times the actual load current.
  3. When the maximum load current is higher than 10A, a heat sink must be installed to the solid state relay, or the SSR relay should be mounted on a metal base plate with heat dissipation effect, and the thermal grease is applied between them.

Dimensions (Unit: mm)

3-phase SSR Relay Dimensions

Wiring Diagram

3-phase 3-32V DC to AC SSR Wiring Diagram

Tips: How to use solid state relays in three-phase current control?

The easiest way is to use two solid state relays for motor’s on-off control, four for commutation control, and the third phase is not controlled. For a motor, it should be noted that, due to motor inertia, its commutation must be conducted after it comes to a standstill in case of similar motor stalling, which may cause a great impact voltage and current. In the design of the control circuit, pay attention to the possibility that the commutating solid state relay is turned on, and it is forbidden at any moment. As for power sequence, power supply of control circuit should be turned off later if added first while the power supply of electrical machinery should be turned off first if added later. Inverters should not be simply adopted to connect commutating SSRs in case of phase fault caused by the phenomenon that the turned-on solid state relay has not been turned off yet while another phase of SSR is already turned on. In addition, fuses, phase loss and temperature relays involved in the motor control are also protection devices to ensure normal operation of the system.

Product reviews
Reliable and Efficient 3-Phase Solid State Relay
5
Iris
Avatar
10/21/2025 9:02 PM
I’ve been using the SSR-10DA solid state relay in a 3-phase control system for several months, and it’s been extremely reliable. The switching speed is fast and consistent, and the zero-crossing feature helps reduce electrical noise and extend equipment life. It handles 10 amps easily without overheating, and installation was straightforward. The build quality feels solid, and performance has been stable under continuous operation. Excellent value for anyone looking for a dependable DC to AC relay with long service life.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews