High performance pressure sensor for sale online. It is available with 0~10kPa, 0~20kPa, 0~50kPa, 0~100kPa, -100~0kPa, and-100~100kPa measuring range, 4-20mA, 0-5V, 1-5V, 0-10V, RS485 output signals, and DC 12V, DC 24V or DC 12-36V power supply, specially used for measuring air, water or oil pressure.
Specifications
- Model: ATO-PRES-P300
- Measuring Range: 0~10kPa, 0~20kPa, 0~50kPa, 0~100kPa, -100~0kPa, -100~100kPa
- Output Signal: 4-20mA, 0-5V, 1-5V, 0-10V, RS485
- Accuracy: ±0.5%FS, ±1%FS
- Power Supply: DC 12V, DC 24V, DC 12-36V
- Electrical Connection: DIN Connector Type, Direct Lead Wire Type, M12 Circular Connector Type
- Thread of Pressure Connection: G1/4, G1/2, 1/4 NPT, 1/2 NPT, M14*1.5, M20*1.5
- Protection Class: IP65
- Measuring Medium: Air, Water and Oil (Non-explosion Proof Area)
- Pressure Type: Gauge Pressure (Standard), Contact Us for Absolute Pressure and Sealed Pressure Type (Note: The measuring range for these two types must be ≤ 1MPa)
- Application: Pressure sensor is widely used in process control, aerospace, automotive, medical equipment, HVAC and other fields.
Pressure Sensor Dimension Drawing (Unit: mm)

Pressure Sensor Wiring Diagram

Tips: What is the output singal of the pressure sensor?
The output signal of a pressure sensor depends on the specific model and configuration, but common types include:
- 4–20mA: Most common in industrial applications. It is noise-resistant and allows long cable runs.
- 0–5V/1–5V/0–10V: Voltage outputs are common in general-purpose applications. 0–5V and 1–5V are typical for lower voltage systems. 0–10V provides a wider range but is more sensitive to electrical noise.
- RS485 (Modbus RTU): A digital output type used for remote communication and advanced monitoring. Allows multiple sensors on a single bus and can provide more detailed data (e.g., pressure, temperature, diagnostics).
Product reviews
It's a pretty good deal.
Alex
9/2/2025 2:35 AM
The previous sensor broke, so I bought two of these as replacements. I chose the 0-100kPa 4-20mA model. When it arrived, I found the threading matched the original port perfectly—no need to re-tap the hole. Installation took just twenty minutes. After two months of use, the pressure readings on the PLC have remained consistently stable with no fluctuations. The cost-performance ratio is significantly better than the imported brand I bought before.
Was this review helpful? (0/0)
Only registered users can write reviews
Customers who bought this item also bought
Pressure Sensor for Air/Water/Oil, 4-20mA/0-5V/RS485 Output
ATO-PRES-P300
$119.68
Silicon piezoresistive pressure sensor covers -0.1 to 100 MPa with 4–20mA, 0–20mA, multiple voltage or RS485 output options. Stainless steel construction supports air, water and oil pressure measurement at medium temperatures from -40°C to 60°C.
Digital Pressure Sensor for Hydraulic/Steam/Air
ATO-PRES-PX300
$173.33
Digital pressure sensor covers -0.1 to 100 MPa and supports 4–20mA, 0–20mA, voltage and RS485 outputs, with a backlit LCD display. Suitable for hydraulic, steam, air and liquid pressure measurement, with medium temperatures from -40°C to 60°C.
3 hp (2.2 kW) VFD, Single Phase Input & Output
GK3000-1S0022
$379.23
Cheap 3 hp VFD, 1 phase for single phase AC induction motor, good variable speed performance, 220V - 240V 17 amps, manufacturer direct sale.
Oxygen Gas Sensor/Transmitter, RS485/4-20mA/0-5V
ATO-GS-O2-3002
$101.58
The oxygen gas sensor measures ranges of 0-30%VOL for RS485 output and 0-25%VOL for analog output, with an accuracy of ±3%FS and a resolution of 0.1%VOL. Gas transmitter has a power supply range of 10~30V DC, with the 0~10V output type requiring a 24V supply. Widely used in industries such as process control, environmental monitoring, medical devices, food and beverage, safety detection, scientific research, and combustion system optimization.
Medical Oxygen Sensor, Lead-free, 0-100% Linear
ATO-GS-O2-3100
$104.46
Factory price medical oxygen sensor is for sale. It is based on the voltage divider electrochemistry principle, featuring linear measurement across the full range of 0 - 100%, a response time of less than 15 seconds, and high precision and efficiency. O2 oxygen sensor is lead-free and complies with the RoHS standard, can be widely used in medical equipment such as oxygen generators and medical ventilators.