Portable Carbon Monoxide (CO) Gas Detector, 0 to 500/1000/2000 ppm

$372.86
Portable carbon monoxide (CO) detector provide high precision detection for CO gas with the range available for 0-500ppm, 0-1000ppm, and 0-2000ppm, audible, visual and vibrating alarm, light weight and small size, easy to carry everywhere with a clip, suitable for various applications.
SKU: GD500-CO
*
Free Shipping
Delivery date: 6-12 days

Portable single gas detector offers carbon monoxide (CO) detection in range of 0 to 500ppm/1000ppm/2000ppm with high accuracy and reliability, and it can be widely used in oil, metallurgy, chemical, medical, agriculture, refinery and other industries.

Features

  • Adopt high precison sensors
  • LCD dot matrix display, support Chinese and English operation, easy to read
  • Gas unit ppm and mg/m3 can be switched quickly
  • One key to check the battery capacity and voltage.
  • One press to restore factory settings.
  • Alarm with ultra-high buzzer sound and light, high and low alarm values are settable
  • Rechargeable lithium polymer battery with high capacity enables long working time
  • With a alligator clip, easy to carry around
  • Rugged and durable housing, comfortable touch
  • Data storage function: Can record 100,000 data, and historical data can be viewed on the device (optional function).

Specification

ModelGD500-CO
Sampling MethodDiffusion
Detection PrincipleElectrochemistry
GasCarbon Monoxide (CO)
Range0 to 500ppm, 0 to 1000ppm or 0 to 2000ppm
Resolution1ppm
Accuracy≤±3%F.S.
DisplayMonochrome dot matrix 128*128 LCD graphic display
BacklightBacklight time is settable; the backlight will be auto-on when alarming.
Data Logging (Optional Function)Storage capacity of over one hundred thousand sets. Interval time ranging from 10~3600 seconds is settable.
AlarmsSound, light and vibration
Operation LanguageChinese/English
Gas UnitGas units ppm and mg/m3 are switchable
Battery3.7V rechargeable lithium battery with 2300mAh capacity, operating time about 10-12h
ChargerTravel charger with USB. Typical charge time 4-6 hours.
Explosion-proof GradeII 1G Ex da ia IIC T4 Ga
Case MaterialABS+PC
Protection GradeIP65
CertificationCE, ATEX (Standard: EN IEC 60079-0:2018, EN 60079-1:2014)
Operating Temperature-20℃~50℃
Operating Humidity0~90%RH (non-condensing)
Dimension131*85*35mm
Weight240g

Note 1:

  • If you require a CO gas detector with a measuring range not listed in the table above, please contact us with details about your operating environment. We can help you choose the right detector for your application.

  • We also offer gas detectors for other common gases. Please refer to the ATO Gas Detector Catalog for available gas types and measuring ranges.

Note 2:

Regarding the flow rate for gas detectors, there are 2 types:

  • Pump-Suction Type: Equipped with a built-in pump, with a flow rate of 600 mL/min. (Models: GD200, GD400, GD600)
  • Diffusion Type: Not equipped with a built-in pump, with a flow rate of 300 mL/min. (Models: GD300, GD500, GD800)

If you require a customized flow rate, please let us know your specific requirements. We will evaluate whether customization is possible. A flow rate that is too high or too low can affect measurement accuracy, so we recommend using an appropriate flow rate for your application.

Flow rate only needs to be considered when sampling gas from pipelines. For measuring gas concentrations in normal ambient air, you do not need to consider the flow rate. To measure confined spaces such as pipelines, please get in touch with us and provide the detailed conditions of use.


Details

Portable Carbon Monoxide (CO) Gas Detector Details

Tips: How to choose a formaldehyde detector?
Formaldehyde is strongly irritating. When the concentration is low, it makes people's eyes hot, tear and red. At a slightly higher concentration, you will feel embarrassed, nauseous, and even breathing hard and suffocating. These "biochemical reactions" come from the toxicity of formaldehyde. Formaldehyde is often made to a 35% to 40% aqueous solution (commonly known as formalin) which is used to preserve cadaveric specimens, sterilize, and produce binders for wood, paper, etc. Formaldehyde gas is difficult to evaporate in these raw materials, and it usually takes about ten years.
Therefore, a formaldehyde gas detector is necessary, a portable and simple operation accurate formaldehyde detector is rather important. According to the detection principles, formaldehyde detectors can be divided into electrochemical formaldehyde detector and chemical formaldehyde detector.Therefore, a formaldehyde detector is necessary, a portable and simple operation accurate formaldehyde detector is rather important. According to the detection principles, formaldehyde detector can be divided into electrochemical formaldehyde detector and chemical formaldehyde detector. If you need to detect the formaldehyde concentration in the space, it is recommended to choose the electrochemical formaldehyde detector; but, if you want to detect the formaldehyde concentration of raw materials, you’d better select the chemical formaldehyde detector.

Product reviews
Questions about distributors
5
Harold
Avatar
4/7/2021 9:45 PM
Do you have distributor in India?
Was this review helpful? Yes No (0/0)
ATO Responded
Don't have Indian distributor, but we ship world wide and provide 12 month warranty as well.
Does it come with a charger?
5
Ivanov
Avatar
4/22/2022 3:15 AM
Does it come with a battery charger? Do I need to buy an extra one?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, this CO gas detector comes with a travel charger.
So Thankful I Purchased This CO Gas Detector
5
Shaina
Avatar
11/22/2022 8:46 PM
I purchased this product in the morning from ATO and it was delivered a few days. We had a new gas stove installed. A couple of days later my wife and I thought we smelled gas around the stove. When this unit arrived I turned it on following the directions. Sure enough it detected a gas leak.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Portable single gas detector offers carbon monoxide (CO) detection in range of 0 to 500ppm/1000ppm/2000ppm with high accuracy and reliability, and it can be widely used in oil, metallurgy, chemical, medical, agriculture, refinery and other industries.

Features

  • Adopt high precison sensors
  • LCD dot matrix display, support Chinese and English operation, easy to read
  • Gas unit ppm and mg/m3 can be switched quickly
  • One key to check the battery capacity and voltage.
  • One press to restore factory settings.
  • Alarm with ultra-high buzzer sound and light, high and low alarm values are settable
  • Rechargeable lithium polymer battery with high capacity enables long working time
  • With a alligator clip, easy to carry around
  • Rugged and durable housing, comfortable touch
  • Data storage function: Can record 100,000 data, and historical data can be viewed on the device (optional function).

Specification

ModelGD500-CO
Sampling MethodDiffusion
Detection PrincipleElectrochemistry
GasCarbon Monoxide (CO)
Range0 to 500ppm, 0 to 1000ppm or 0 to 2000ppm
Resolution1ppm
Accuracy≤±3%F.S.
DisplayMonochrome dot matrix 128*128 LCD graphic display
BacklightBacklight time is settable; the backlight will be auto-on when alarming.
Data Logging (Optional Function)Storage capacity of over one hundred thousand sets. Interval time ranging from 10~3600 seconds is settable.
AlarmsSound, light and vibration
Operation LanguageChinese/English
Gas UnitGas units ppm and mg/m3 are switchable
Battery3.7V rechargeable lithium battery with 2300mAh capacity, operating time about 10-12h
ChargerTravel charger with USB. Typical charge time 4-6 hours.
Explosion-proof GradeII 1G Ex da ia IIC T4 Ga
Case MaterialABS+PC
Protection GradeIP65
CertificationCE, ATEX (Standard: EN IEC 60079-0:2018, EN 60079-1:2014)
Operating Temperature-20℃~50℃
Operating Humidity0~90%RH (non-condensing)
Dimension131*85*35mm
Weight240g

Note 1:

  • If you require a CO gas detector with a measuring range not listed in the table above, please contact us with details about your operating environment. We can help you choose the right detector for your application.

  • We also offer gas detectors for other common gases. Please refer to the ATO Gas Detector Catalog for available gas types and measuring ranges.

Note 2:

Regarding the flow rate for gas detectors, there are 2 types:

  • Pump-Suction Type: Equipped with a built-in pump, with a flow rate of 600 mL/min. (Models: GD200, GD400, GD600)
  • Diffusion Type: Not equipped with a built-in pump, with a flow rate of 300 mL/min. (Models: GD300, GD500, GD800)

If you require a customized flow rate, please let us know your specific requirements. We will evaluate whether customization is possible. A flow rate that is too high or too low can affect measurement accuracy, so we recommend using an appropriate flow rate for your application.

Flow rate only needs to be considered when sampling gas from pipelines. For measuring gas concentrations in normal ambient air, you do not need to consider the flow rate. To measure confined spaces such as pipelines, please get in touch with us and provide the detailed conditions of use.


Details

Portable Carbon Monoxide (CO) Gas Detector Details

Tips: How to choose a formaldehyde detector?
Formaldehyde is strongly irritating. When the concentration is low, it makes people's eyes hot, tear and red. At a slightly higher concentration, you will feel embarrassed, nauseous, and even breathing hard and suffocating. These "biochemical reactions" come from the toxicity of formaldehyde. Formaldehyde is often made to a 35% to 40% aqueous solution (commonly known as formalin) which is used to preserve cadaveric specimens, sterilize, and produce binders for wood, paper, etc. Formaldehyde gas is difficult to evaporate in these raw materials, and it usually takes about ten years.
Therefore, a formaldehyde gas detector is necessary, a portable and simple operation accurate formaldehyde detector is rather important. According to the detection principles, formaldehyde detectors can be divided into electrochemical formaldehyde detector and chemical formaldehyde detector.Therefore, a formaldehyde detector is necessary, a portable and simple operation accurate formaldehyde detector is rather important. According to the detection principles, formaldehyde detector can be divided into electrochemical formaldehyde detector and chemical formaldehyde detector. If you need to detect the formaldehyde concentration in the space, it is recommended to choose the electrochemical formaldehyde detector; but, if you want to detect the formaldehyde concentration of raw materials, you’d better select the chemical formaldehyde detector.

Product reviews
Questions about distributors
5
Harold
Avatar
4/7/2021 9:45 PM
Do you have distributor in India?
Was this review helpful? Yes No (0/0)
ATO Responded
Don't have Indian distributor, but we ship world wide and provide 12 month warranty as well.
Does it come with a charger?
5
Ivanov
Avatar
4/22/2022 3:15 AM
Does it come with a battery charger? Do I need to buy an extra one?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, this CO gas detector comes with a travel charger.
So Thankful I Purchased This CO Gas Detector
5
Shaina
Avatar
11/22/2022 8:46 PM
I purchased this product in the morning from ATO and it was delivered a few days. We had a new gas stove installed. A couple of days later my wife and I thought we smelled gas around the stove. When this unit arrived I turned it on following the directions. Sure enough it detected a gas leak.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews