Double Acting Pneumatic Valve Actuator, 210mm Bore Size

$1,078.19
High performance pneumatic valve actuator is an aluminum alloy actuator that opens and closes ball valve and butterfly, powered by compressed air, air supply port 1/4 inch, bore size 210mm, air pressure 2.5bar ~ 8bar, max. working pressure 10 bar. Air operated actuator has small size and large torque, which is perfect for valve control.
SKU: ATO-AT-210D
*
Free Shipping
Delivery date: 6-12 days

Pneumatic valve actuator is an executive device that uses air pressure to open and close ball valve, butterfly or regulating valve. The pneumatic actuator powered by compresses air is easy to repair and maintain, and has good adaptability to the environment.

Specifiation

  • Model: ATO-AT210D
  • Bore Size: 210mm (8.27 inch)
  • Air Supply Port: 1/4 inch
  • Power Source: Compressed Air
  • Actuator Type: Double Acting
  • Air Pressure: 2.5bar ~ 8bar
  • Max Working Pressure: 10bar
  • Operating Temperature (Optional): -20℃ ~ 80℃, -35℃ ~ 80℃, -20℃ ~ 150℃
  • Rotation Angle: 90°±5%
  • Body Material: Aluminum Alloy
  • Life Time: One Million Time

Dimensions

Pneumatic actuator dimension

ATO-AT210D

QABCDEFGHI
Φ140mm530mm226mm113mm113mm297mm257mm30mm130mmPF
JKOPSTUVWX
M61/4"30mm90mm4mm4mm12mm24mm16mm32mm

Details

Pneumatic valve actuator details

PNNumberNameStandard Material
14Position IndicatorPolypropylene+GF
21Position Indicator SeatPolypropylene+GF
31Snap RingStainless Steel
41BearingStainless Steel
51BearingPolyphthalamide
61Bore BodyExtruded Aluminum alloy
72BearingPolyphthalamide
82PistonDie Cast Aluminum
92O-RingNitrile(NBR70)
102BearingPolyphthalamide
118End Cover bolt gasketStainless Steel
122End Cover boltStainless Steel
132Left and Right end CoverDie Cast Aluminum
142O-RingNitrile(NBR70)
152Guide SleevePolypropylene+GF
161O-RingNitrile(NBR70)
171BearingNylon46
181BearingPolyphthalamide
191Cam SwitchStainless Steel
201Actuating ShaftSteel alloy
211BearingNylon46
221O-RingNitrile(NBR70)
231O-RingNitrile(NBR70)
242Spacer for Limit BoltStainless Steel
252Limit NutStainless Steel
262Limit BoltStainless Steel
27min.5/max.12SpringHigh alloy Spring Steel
281Spring SeatPolypropylene+GF

Tips: What happens to a pneumatic actuator if the filter regulator is damaged?

During the air stroke, if the filter regulator is lost and the compressor output pressure is higher than the minimum pressure, the pneumatic actuator will continue to travel without excessive torque. Ultimately, any final pressure above the minimum pressure will be exerted on the mechanical end plug. This plug is designed to withstand a maximum supply pressure of 12 bar for most of our pneumatic actuators. If the valve is stuck during travel under the conditions of filter failure and increased air pressure supplied to the MOP value as described above, the actuator output torque produced by the cylinder may exceed (depending on the supplied intake air pressure) MAST execution Technically speaking, if the actuator is selected with both minimum and maximum supply pressure in mind (by selecting "mandatory actuator MAST" in the selection table), the actuator MAST problem goes away, but in most cases Under these conditions, the size of the output model is too large for negligible commercial impact and possible problems with valve MAST. One possible suggestion to eliminate or at least reduce oversizing is to introduce a relief valve to limit the actual maximum pressure to a level well below the maximum pressure the compressor can deliver.

Double Acting Pneumatic Valve Actuator Output Torque Table

Unit: Nm

ModelStandard3bar3.5bar4bar4.5bar5bar5.5bar6bar7bar8bar
ATO-AT032D3.64.355.76.47.388.71011.6
ATO-AT050D8.410.111.713.515.116.718.42023.426.7
ATO-AT063D14.817.720.623.626.529.432.335.3410147
ATO-AT075D29.23540.846.652.558.364.169.981.593.2
ATO-AT088D45.95564.273.382.591.6101.1110.1128.1146.1
ATO-AT100D66.880.193.4106.3120.3133.3146.3160.3183.3213.3
ATO-AT125D139167195223250278303333389444
ATO-AT145D217261304348391434478521608695
ATO-AT160D285341398455512577625682795909
ATO-AT190D53363974685297610651171127714901703
ATO-AT240D893107212501430160817871965214425022859
ATO-AT270D1306156518242084234326032862312136404159

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Pneumatic valve actuator is an executive device that uses air pressure to open and close ball valve, butterfly or regulating valve. The pneumatic actuator powered by compresses air is easy to repair and maintain, and has good adaptability to the environment.

Specifiation

  • Model: ATO-AT210D
  • Bore Size: 210mm (8.27 inch)
  • Air Supply Port: 1/4 inch
  • Power Source: Compressed Air
  • Actuator Type: Double Acting
  • Air Pressure: 2.5bar ~ 8bar
  • Max Working Pressure: 10bar
  • Operating Temperature (Optional): -20℃ ~ 80℃, -35℃ ~ 80℃, -20℃ ~ 150℃
  • Rotation Angle: 90°±5%
  • Body Material: Aluminum Alloy
  • Life Time: One Million Time

Dimensions

Pneumatic actuator dimension

ATO-AT210D

QABCDEFGHI
Φ140mm530mm226mm113mm113mm297mm257mm30mm130mmPF
JKOPSTUVWX
M61/4"30mm90mm4mm4mm12mm24mm16mm32mm

Details

Pneumatic valve actuator details

PNNumberNameStandard Material
14Position IndicatorPolypropylene+GF
21Position Indicator SeatPolypropylene+GF
31Snap RingStainless Steel
41BearingStainless Steel
51BearingPolyphthalamide
61Bore BodyExtruded Aluminum alloy
72BearingPolyphthalamide
82PistonDie Cast Aluminum
92O-RingNitrile(NBR70)
102BearingPolyphthalamide
118End Cover bolt gasketStainless Steel
122End Cover boltStainless Steel
132Left and Right end CoverDie Cast Aluminum
142O-RingNitrile(NBR70)
152Guide SleevePolypropylene+GF
161O-RingNitrile(NBR70)
171BearingNylon46
181BearingPolyphthalamide
191Cam SwitchStainless Steel
201Actuating ShaftSteel alloy
211BearingNylon46
221O-RingNitrile(NBR70)
231O-RingNitrile(NBR70)
242Spacer for Limit BoltStainless Steel
252Limit NutStainless Steel
262Limit BoltStainless Steel
27min.5/max.12SpringHigh alloy Spring Steel
281Spring SeatPolypropylene+GF

Tips: What happens to a pneumatic actuator if the filter regulator is damaged?

During the air stroke, if the filter regulator is lost and the compressor output pressure is higher than the minimum pressure, the pneumatic actuator will continue to travel without excessive torque. Ultimately, any final pressure above the minimum pressure will be exerted on the mechanical end plug. This plug is designed to withstand a maximum supply pressure of 12 bar for most of our pneumatic actuators. If the valve is stuck during travel under the conditions of filter failure and increased air pressure supplied to the MOP value as described above, the actuator output torque produced by the cylinder may exceed (depending on the supplied intake air pressure) MAST execution Technically speaking, if the actuator is selected with both minimum and maximum supply pressure in mind (by selecting "mandatory actuator MAST" in the selection table), the actuator MAST problem goes away, but in most cases Under these conditions, the size of the output model is too large for negligible commercial impact and possible problems with valve MAST. One possible suggestion to eliminate or at least reduce oversizing is to introduce a relief valve to limit the actual maximum pressure to a level well below the maximum pressure the compressor can deliver.

Only registered users can write reviews