Buy 2-phase micro stepper motor at low price. Motor size Nema 8 (20mm), rated voltage DC 12V/24V, current 0.6Amp/0.3Amp, resistance 20Ω/6.5Ω, stepping angle 18 degree. Miniature stepper motor with metal gear, bipolar drive, used in medical equipment, printer, scanner, automotive meter, gas range, sewing machine, security systems, optical fiber welding equipment, etc.
Specification Datasheet
| Model | ATO-SM2014 | ATO-SM2019 |
| Rated Voltage | 24V | 12V |
| Rated Current | 0.3A | 0.6A |
| Resistance | 6.5Ω | 20Ω |
| Phase | 2 Phase | 2 Phase |
| Stepping Angle | 18° | 18° |
| Excitation Method | 2 | 2 |
| Pull-in Torque | 5.2 mN-m (500 pps) | 3.2 mN-m (500 pps) |
| Pull-out Torque | 6.5 mN-m (500 pps) | 4.5 mN-m (500 pps) |
| Holding Torque | 15.0 mN-m (0 pps) | 11.0 mN-m (0 pps) |
| Max. Continuous Response Frequency | 1200 pps | 1200 pps |
| Max. Starting Frequency | 900 pps | 900 pps |
| Drive Mode | Bipolar Drive | |
| Ambient Temperature | 0℃~55℃ | |
| Insulation Resistance | 500VDC 100MΩ min | |
| Insulation Grade | E | |
Phase Sequence Excitation & Dimensions Diagram (Unit: mm)
- 24V 0.3A Micro Stepper Motor (ATO-SM2014)
| Connector PIN Location | ||||||
| PIN No. | Color | CCW←→CW (Seen from flange side) | Phase | |||
| 1 | Yellow | ON | - | - | ON | A |
| 2 | Red | - | - | ON | ON | A |
| 3 | Black | ON | ON | - | - | B |
| 4 | Blue | - | ON | ON | - | B |

- 12V 0.6A Micro Stepper Motor (ATO-SM2019)
| Connector PIN Location | ||||||
| PIN No. | Color | CCW←→CW (Seen from flange side) | Phase | |||
| 1 | Yellow | ON | - | - | ON | A |
| 2 | Red | ON | ON | - | - | A |
| 3 | Black | - | - | ON | ON | B |
| 4 | Blue | - | ON | ON | - | B |

Details

Tips: Nema 8 micro stepper motor maintenance.
- Zero excitation maintenance: maintain the Nema 8 micro stepper motor with an excitation circuit formed by a current relay.
- Over-voltage maintenance: maintain the Nema 8 micro stepper motor with an armature circuit composed of over-voltage relay.
- Overload protection: use an armature circuit composed of a current relay to maintain the Nema 8 micro stepper motor.
- Overcurrent protection: use an armature circuit composed of overcurrent relay to maintain the Nema 8 micro stepper motor.
- Grounding maintenance: Use a grounding device formed by voltage relay to maintain the Nema 8 micro stepper motor. When any point of the DC motor is grounded, the voltage relay will act to send out a warning signal or cut off the power supply.
Only registered users can write reviews
Customers who bought this item also bought
Nema 4 Micro Stepper Motor, 5V, 2 Phase, Bipolar
ATO-STEP-MG452
$34.15
Micro stepper motor size in Nema 4 (10mm). Rated voltage 5V, current 0.33A/0.27A/0.128A for selection, 2 phase, step angle 18°, resistance 15/18/39Ω, holding torque 1.6/1.3/1.3 mN-m. Cheap miniature stepper motor with metal gear, bipolar drive.
Nema 6 Micro Stepper Motor, 3V/ 5V, 2 Phase, Bipolar
ATO-STEP-MG6352
$35.69
Low price Nema 6 micro stepper motor for sale, with metal gear. Rated voltage 3V or 5V, current 0.16~0.5A for selection, stepping angle 18 degree, resistance 10Ω/15Ω, holding torque 1.4~2.6 mN-m. 2-phase miniature stepper motor, bipolar drive.