Nema 10 Micro Stepper Motor, 6V/ 24V, 15 Degree, Bipolar

$49.85
Buy 2 phase micro stepper motor at affordable price. Stepping angle 7.5 degree or 15 degree. Rated voltage 6V or 24V for selection, corresponding current 0.2A/0.35A, resistance 10Ω/16Ω, holding torque 13/26 mN-m. Nema 10 miniature stepper motor with metal gear, bipolar drive.
SKU: ATO-STEP-MG10624
*
This product has a minimum quantity of 2
Free Shipping
Delivery date: 6-12 days

Nema 10 micro stepper motor works at 2-phase DC 6V/ 24V. Rated current 0.2Amp/0.35Amp, resistance 10~18Ω, optional stepping angle 7.5°/15°. Miniature stepper motor for sale, with metal gear and bipolar drive, factory price.

Specification Datasheet

ModelATO-SM2501ATO-SM2502
Rated Voltage6V24V
Rated Current0.2A0.35A
Resistance10Ω16Ω
Phase2 Phase2 Phase
Stepping Angle7.5°15°
Excitation Method22
Pull-in Torque6.0 mN-m (200 pps)12.5 mN-m (500 pps)
Pull-out Torque6.5 mN-m (700 pps)16 mN-m (500 pps)
Holding Torque13.0 mN-m (0 pps)26.0 mN-m (0 pps)
Max. Continuous Response Frequency650 pps1300 pps
Max. Starting Frequency600 pps650 pps
Drive ModeBipolar Drive
Ambient Temperature0℃~55℃
Insulation Resistance500VDC 100MΩ min
Insulation GradeE

Phase Sequence Excitation & Dimensions Diagram (Unit: mm)

  • 6V 0.2A Micro Stepper Motor (ATO-SM2501)
Connector PIN Location
PIN No.ColorCCW←→CW
(Seen from flange side)
Phase
1OrangeONON--B
2Yellow--ONONB
3Brown-ONON-A
4BlackON--ONA

Dimensions of Nema 10 Micro Geared Stepper Motor, 6V, 0.2A, 15 Degree

  • 24V 0.35A Micro Stepper Motor (ATO-SM2502)
Connector PIN Location
PIN No.ColorCCW←→CW
(Seen from flange side)
Phase
1OrangeONON--B
2Yellow--ONONB
3Brown-ONON-A
4BlackON--ONA

Dimensions of Nema 10 Micro Geared Stepper Motor, 24V, 0.35A, 15 Degree

Details

Nema 10 Micro Stepper Motor Details

Tips: The noise source of Nema 10 micro stepper motor.

  1. The noise caused by the internal electromagnetic of Nema 10 micro stepper motor. Tooth harmonic noise is caused by improper cooperation between stator, rotor eccentricity and slot, as well as rotor imbalance.
  2. Mechanical noise is a kind of frictional sound produced by mechanical parts of Nema 10 micro stepper motor such as bearings and bores.
  3. The noise and whistle noise caused by the air duct. Fan rotation causes the gas to pulsate periodically. The air current hits the solid object and makes a monotonous sound. When the fan blades roll, the surrounding air emits a kind of vortex sound, and its frequency spectrum is relatively wide.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Nema 10 micro stepper motor works at 2-phase DC 6V/ 24V. Rated current 0.2Amp/0.35Amp, resistance 10~18Ω, optional stepping angle 7.5°/15°. Miniature stepper motor for sale, with metal gear and bipolar drive, factory price.

Specification Datasheet

ModelATO-SM2501ATO-SM2502
Rated Voltage6V24V
Rated Current0.2A0.35A
Resistance10Ω16Ω
Phase2 Phase2 Phase
Stepping Angle7.5°15°
Excitation Method22
Pull-in Torque6.0 mN-m (200 pps)12.5 mN-m (500 pps)
Pull-out Torque6.5 mN-m (700 pps)16 mN-m (500 pps)
Holding Torque13.0 mN-m (0 pps)26.0 mN-m (0 pps)
Max. Continuous Response Frequency650 pps1300 pps
Max. Starting Frequency600 pps650 pps
Drive ModeBipolar Drive
Ambient Temperature0℃~55℃
Insulation Resistance500VDC 100MΩ min
Insulation GradeE

Phase Sequence Excitation & Dimensions Diagram (Unit: mm)

  • 6V 0.2A Micro Stepper Motor (ATO-SM2501)
Connector PIN Location
PIN No.ColorCCW←→CW
(Seen from flange side)
Phase
1OrangeONON--B
2Yellow--ONONB
3Brown-ONON-A
4BlackON--ONA

Dimensions of Nema 10 Micro Geared Stepper Motor, 6V, 0.2A, 15 Degree

  • 24V 0.35A Micro Stepper Motor (ATO-SM2502)
Connector PIN Location
PIN No.ColorCCW←→CW
(Seen from flange side)
Phase
1OrangeONON--B
2Yellow--ONONB
3Brown-ONON-A
4BlackON--ONA

Dimensions of Nema 10 Micro Geared Stepper Motor, 24V, 0.35A, 15 Degree

Details

Nema 10 Micro Stepper Motor Details

Tips: The noise source of Nema 10 micro stepper motor.

  1. The noise caused by the internal electromagnetic of Nema 10 micro stepper motor. Tooth harmonic noise is caused by improper cooperation between stator, rotor eccentricity and slot, as well as rotor imbalance.
  2. Mechanical noise is a kind of frictional sound produced by mechanical parts of Nema 10 micro stepper motor such as bearings and bores.
  3. The noise and whistle noise caused by the air duct. Fan rotation causes the gas to pulsate periodically. The air current hits the solid object and makes a monotonous sound. When the fan blades roll, the surrounding air emits a kind of vortex sound, and its frequency spectrum is relatively wide.
Only registered users can write reviews