Nema 17 Micro Stepper Motor, 12V/ 24V, 7.5 Degree

$62.15
Buy Nema 17 micro stepper motor with ideal price. Working voltage 12V/24V for selection, corresponding current 0.4A/0.6A, resistance 10Ω/30Ω, high torque 80 mN-m, stepping angle 7.5 degree. 2-phase miniature stepper motor with metal gear, bipolar drive.
SKU: ATO-STEP-MG171224
*
This product has a minimum quantity of 2
Free Shipping
Delivery date: 6-12 days

Competitive price Nema 17 micro stepper motor for sale. Motor diameter 42mm, optional rated voltage 12V/24V, current 0.4/0.6Amp, resistance 10Ω/30Ω, stepping angle 7.5°. 2 phase miniature stepper motor has bipolar drive, which can be used in medical equipment, printer, scanner, automotive meter, CNC equipment, security systems, flash lamp, etc.

Specification Datasheet

ModelATO-SM4201ATO-SM4203
Rated Voltage24V12V
Rated Current0.6A0.4A
Resistance30Ω10Ω
Phase2 Phase2 Phase
Stepping Angle7.5°7.5°
Excitation Method22
Pull-in Torque31.0 mN-m (200 pps)35 mN-m (300 pps)
Pull-out Torque23.0 mN-m (600 pps)40 mN-m (300 pps)
Holding Torque80.0 mN-m (0 pps)80.0 mN-m (0 pps)
Max. Continuous Response Frequency640 pps400 pps
Max. Starting Frequency700 pps400 pps
Insulation GradeEB
Drive ModeBipolar Drive
Ambient Temperature0℃~55℃
Insulation Resistance500VDC 100MΩ min

Phase Sequence Excitation & Dimensions Diagram (Unit: mm)

  • 24V 0.6A Micro Stepper Motor (ATO-SM4201)
Connector PIN Location
PIN No.ColorCCW←→CW
(Seen from flange side)
Phase
1RedONON--B
2Yellow--ONONB
3Orange-ONON-A
4BlueON--ONA

Dimensions of Nema 17 Micro Geared Stepper Motor, 24V, 7.5 Degree

  • 12V 0.4A Micro Stepper Motor (ATO-SM4203)
Connector PIN Location
PIN No.ColorCCW←→CW
(Seen from flange side)
Phase
1YellowON--ONON-A
2Blue-ONON--ONA
3Red--ONON--B
4OrangeONON--ONONB

Dimensions of Nema 17 Micro Geared Stepper Motor, 12, 7.5 Degree

Details

Nema 17  Micro Stepper Motor Details

Tips: Current operation principle of Nema 17 micro stepper motor.

  1. The torque of Nema 17 micro stepper motor is proportional to the product of the current and voltage passed in a certain period of time, and the maximum value is obtained when starting (when not rotating). According to this principle, the voltage is usually fixed, only proportional to the amount of current).
  2. If you want to increase the current, you can thicken the coil to reduce the resistance, or reduce the number of coils (the total length of coil) or increase the load.
  3. If the coil wire is thickened, do not increase the number of coils. Conversely, if the coil wire is made thinner without increasing the number of coils, only increasing the speed will reduce the torque and make the Nema 17 micro stepper motor unusable.
  4. Generally speaking, the smaller the number of coils of Nema 17 micro stepper motor, the lower the resistance of rotor, resulting in larger current and higher speed.
  5. For the same rotor, if the magnetic force of the magnet becomes stronger, and the speed and torque will increase.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
Durable and well-made
5
Eleanor
Avatar
10/27/2025 8:32 PM
I’ve been using the Nema 17 micro stepper motor for a few weeks now, and I’m really impressed with its performance. The motor runs very smoothly and offers precise step control, which is perfect for my 3D printing setup. The torque is strong for its compact size, and it maintains consistent power even under load. I also appreciate the solid metal gear construction—it feels durable and well-made. With a current of 0.6A, it’s quite energy-efficient too.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Competitive price Nema 17 micro stepper motor for sale. Motor diameter 42mm, optional rated voltage 12V/24V, current 0.4/0.6Amp, resistance 10Ω/30Ω, stepping angle 7.5°. 2 phase miniature stepper motor has bipolar drive, which can be used in medical equipment, printer, scanner, automotive meter, CNC equipment, security systems, flash lamp, etc.

Specification Datasheet

ModelATO-SM4201ATO-SM4203
Rated Voltage24V12V
Rated Current0.6A0.4A
Resistance30Ω10Ω
Phase2 Phase2 Phase
Stepping Angle7.5°7.5°
Excitation Method22
Pull-in Torque31.0 mN-m (200 pps)35 mN-m (300 pps)
Pull-out Torque23.0 mN-m (600 pps)40 mN-m (300 pps)
Holding Torque80.0 mN-m (0 pps)80.0 mN-m (0 pps)
Max. Continuous Response Frequency640 pps400 pps
Max. Starting Frequency700 pps400 pps
Insulation GradeEB
Drive ModeBipolar Drive
Ambient Temperature0℃~55℃
Insulation Resistance500VDC 100MΩ min

Phase Sequence Excitation & Dimensions Diagram (Unit: mm)

  • 24V 0.6A Micro Stepper Motor (ATO-SM4201)
Connector PIN Location
PIN No.ColorCCW←→CW
(Seen from flange side)
Phase
1RedONON--B
2Yellow--ONONB
3Orange-ONON-A
4BlueON--ONA

Dimensions of Nema 17 Micro Geared Stepper Motor, 24V, 7.5 Degree

  • 12V 0.4A Micro Stepper Motor (ATO-SM4203)
Connector PIN Location
PIN No.ColorCCW←→CW
(Seen from flange side)
Phase
1YellowON--ONON-A
2Blue-ONON--ONA
3Red--ONON--B
4OrangeONON--ONONB

Dimensions of Nema 17 Micro Geared Stepper Motor, 12, 7.5 Degree

Details

Nema 17  Micro Stepper Motor Details

Tips: Current operation principle of Nema 17 micro stepper motor.

  1. The torque of Nema 17 micro stepper motor is proportional to the product of the current and voltage passed in a certain period of time, and the maximum value is obtained when starting (when not rotating). According to this principle, the voltage is usually fixed, only proportional to the amount of current).
  2. If you want to increase the current, you can thicken the coil to reduce the resistance, or reduce the number of coils (the total length of coil) or increase the load.
  3. If the coil wire is thickened, do not increase the number of coils. Conversely, if the coil wire is made thinner without increasing the number of coils, only increasing the speed will reduce the torque and make the Nema 17 micro stepper motor unusable.
  4. Generally speaking, the smaller the number of coils of Nema 17 micro stepper motor, the lower the resistance of rotor, resulting in larger current and higher speed.
  5. For the same rotor, if the magnetic force of the magnet becomes stronger, and the speed and torque will increase.
Product reviews
Durable and well-made
5
Eleanor
Avatar
10/27/2025 8:32 PM
I’ve been using the Nema 17 micro stepper motor for a few weeks now, and I’m really impressed with its performance. The motor runs very smoothly and offers precise step control, which is perfect for my 3D printing setup. The torque is strong for its compact size, and it maintains consistent power even under load. I also appreciate the solid metal gear construction—it feels durable and well-made. With a current of 0.6A, it’s quite energy-efficient too.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews