Nema 42 Stepper motor, 4A, 1.8 degree, 2 phase 4 wires

$247.85
Nema 42 high accuracy 4-wire bipolar stepper motor with 10Nm holding torque, 1.8 deg. step angle (200 steps/revolution), excellent quality direct sale by manufacturer.
SKU: ATO-STEP-21004204
*
Free Shipping
Delivery date: 6-12 days

4A, 2 phase NEMA 42 bipolar stepper motor, 4-wire, with 1.8° per step, have a holding torque of 10Nm, manufacturer direct sale.

Specifications

BasicsModelATO2100-4004A
Matched the Driver ModelATODSP86 (Click it to see more info)
Step Angle1.8°
Length100mm
Weight5kg
Current4A
Resistance1.0Ω
Holding Torque10Nm
Motor Leads4
Rotor Inertia5500g-cm2
Shaft Diameter18mm or 19mm
Technical parametersStep Angle Accuracy±5% (full step, no load)
Resistance Accuracy±10%
Inductance Accuracy±20%
Temperature Rise80℃Max. (rated current, 2 phase on)
Ambient Temperature-10℃~+50℃
Insulation Resistance100MΩ Min. 500VDC
Dielectric Strength1Min. 500VAC·5mA
Shaft Radial Play0.06Max. 450g
Shaft Axial Play0.08Max. 450g

Shaft Diameter 18mm Dimension
Nema 42 18mm dimension
Shaft Diameter 19mm Dimension
Nema 42 19mm dimension.
Motor Connection
Motor connection
Note:
We default delivery 18mm shaft diameter specifications of the motor, if you need 19mm shaft diameter, please contact us in advance.
Tips: Stepper motor operating temperature and humidity
General requirements of stepper motor operating temperature range is 0 ~ 50 ℃, humidity is 20% ~ 90% RH; storage temperature range is -20 ~ 70 ℃, humidity is 15% ~ 95% RH.
Temperature requirements
If the motor working environment temperature is higher, consider to reduce the working current of the motor to reduce the temperature rise, eventually to control the motor internal heat insulation system can withstand the range.For example, if the ambient temperature at 60 ℃, the motor temperature rise will control within 60 k. Because the vast majority of the stepper motor manufacturer of insulation material is a class B standard, higher levels of insulation material are almost impossible to corresponding or cost is too high, so in high temperature applications environment, a more realistic option is to control the rise of temperature of the motor, is to strengthen the cool conditions or reduce the working current of the motor.
Stepper motor temperature is too high, in addition to the safety of the insulation system, can also affect the stability of permanent magnets. Permanent magnets will increase with the temperature demagnetization, so as to reduce the working torque of the motor. Stepper motor temperature is too low, will make bearing grease solidification, thus lose bearing lubrication, so lower than 0 ℃ to consider to choose low temperature under the condition of bearing.
Humidity requirements
Stepper motor to humidity requirements, main is to avoid condensation inside the motor. The outer surface of the stepper motor rotor and the stator's inner surface of the silicon steel sheet in addition to processing time tu rust-proof oil generally no other measures rust, if the humidity is easy to condensation on the surface, causing rust. As a result of the stepper motor rotor and stator gap is very small, rusty spot is likely to be stuck rotor so that the motor failure. On the other hand is the humidity is too high, will also affect the insulation properties of insulating materials, for the work of general motors is low the small size of step motor general effect is not big, but for step motor driving voltage is higher, the effect still cannot be ignored.

Stepper Motors vs. Servo Motors: Quick Comparison

In this video, stepper motors and servo motors are compared in different aspects.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Stepper Motor Wiring

In this video, the process of stepper motor wiring is introduced to you. The stepper motor driver can accept NPN or PNP line pulse signals. If the driving pulse is 12V, a 1kΩ resistor is required in series. If it is 24V, a 2kΩ resistor is required.

Product reviews
Love these nema 42 stepper motors
5
Dozzie
Avatar
11/15/2022 8:28 PM
I love these nema 42 stepper motors. I have a project where I had to mount one of these stepper motors onto a small speaker that has manual volume control. It was an excellent purchase.
Was this review helpful? Yes No (0/0)
Run my machine
5
Gammon
Avatar
12/29/2022 11:12 PM
I've converted an old radial arm saw to a CNC router. I'm using three of these nema 42 stepper motors , and I am both surprised and pleased at how well they run this rather large machine.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

4A, 2 phase NEMA 42 bipolar stepper motor, 4-wire, with 1.8° per step, have a holding torque of 10Nm, manufacturer direct sale.

Specifications

BasicsModelATO2100-4004A
Matched the Driver ModelATODSP86 (Click it to see more info)
Step Angle1.8°
Length100mm
Weight5kg
Current4A
Resistance1.0Ω
Holding Torque10Nm
Motor Leads4
Rotor Inertia5500g-cm2
Shaft Diameter18mm or 19mm
Technical parametersStep Angle Accuracy±5% (full step, no load)
Resistance Accuracy±10%
Inductance Accuracy±20%
Temperature Rise80℃Max. (rated current, 2 phase on)
Ambient Temperature-10℃~+50℃
Insulation Resistance100MΩ Min. 500VDC
Dielectric Strength1Min. 500VAC·5mA
Shaft Radial Play0.06Max. 450g
Shaft Axial Play0.08Max. 450g

Shaft Diameter 18mm Dimension
Nema 42 18mm dimension
Shaft Diameter 19mm Dimension
Nema 42 19mm dimension.
Motor Connection
Motor connection
Note:
We default delivery 18mm shaft diameter specifications of the motor, if you need 19mm shaft diameter, please contact us in advance.
Tips: Stepper motor operating temperature and humidity
General requirements of stepper motor operating temperature range is 0 ~ 50 ℃, humidity is 20% ~ 90% RH; storage temperature range is -20 ~ 70 ℃, humidity is 15% ~ 95% RH.
Temperature requirements
If the motor working environment temperature is higher, consider to reduce the working current of the motor to reduce the temperature rise, eventually to control the motor internal heat insulation system can withstand the range.For example, if the ambient temperature at 60 ℃, the motor temperature rise will control within 60 k. Because the vast majority of the stepper motor manufacturer of insulation material is a class B standard, higher levels of insulation material are almost impossible to corresponding or cost is too high, so in high temperature applications environment, a more realistic option is to control the rise of temperature of the motor, is to strengthen the cool conditions or reduce the working current of the motor.
Stepper motor temperature is too high, in addition to the safety of the insulation system, can also affect the stability of permanent magnets. Permanent magnets will increase with the temperature demagnetization, so as to reduce the working torque of the motor. Stepper motor temperature is too low, will make bearing grease solidification, thus lose bearing lubrication, so lower than 0 ℃ to consider to choose low temperature under the condition of bearing.
Humidity requirements
Stepper motor to humidity requirements, main is to avoid condensation inside the motor. The outer surface of the stepper motor rotor and the stator's inner surface of the silicon steel sheet in addition to processing time tu rust-proof oil generally no other measures rust, if the humidity is easy to condensation on the surface, causing rust. As a result of the stepper motor rotor and stator gap is very small, rusty spot is likely to be stuck rotor so that the motor failure. On the other hand is the humidity is too high, will also affect the insulation properties of insulating materials, for the work of general motors is low the small size of step motor general effect is not big, but for step motor driving voltage is higher, the effect still cannot be ignored.

Product reviews
Love these nema 42 stepper motors
5
Dozzie
Avatar
11/15/2022 8:28 PM
I love these nema 42 stepper motors. I have a project where I had to mount one of these stepper motors onto a small speaker that has manual volume control. It was an excellent purchase.
Was this review helpful? Yes No (0/0)
Run my machine
5
Gammon
Avatar
12/29/2022 11:12 PM
I've converted an old radial arm saw to a CNC router. I'm using three of these nema 42 stepper motors , and I am both surprised and pleased at how well they run this rather large machine.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews