Nema 42 Bipolar Stepper motor, 6A, 2 phase 4 wires

$300.31
The 6A, 2 phase NEMA 42 stepper motor is a 4-wire bipolar stepper motor with 1.8° per step, specified to have a holding torque of 20Nm, favorable price and direct sale by manufacturer.
SKU: ATO-STEP-21504206
*
Free Shipping
Delivery date: 6-12 days

6A, 2 phase NEMA 42 bipolar stepper motor, 4-wire, with 1.8° per step, have a holding torque of 20Nm, manufacturer direct sale.

Specifications

BasicsModelATO2150-6004A
Matched the Driver ModelATODSP86 (Click it to see more info)
Step Angle1.8°
Length150mm
Weight8.4kg
Current6A
Resistance0.65Ω
Holding Torque20Nm
Motor Leads4
Rotor Inertia10900g-cm2
Shaft Diameter18mm or 19mm
Technical parametersStep Angle Accuracy±5% (full step, no load)
Resistance Accuracy±10%
Inductance Accuracy±20%
Temperature Rise80℃Max. (rated current, 2 phase on)
Ambient Temperature-10℃~+50℃
Insulation Resistance100MΩ Min. 500VDC
Dielectric Strength1Min. 500VAC·5mA
Shaft Radial Play0.06Max. 450g
Shaft Axial Play0.08Max. 450g

Shaft Diameter 18mm Dimension
Nema 42 18mm dimension
Shaft Diameter 19mm Dimension
Nema 42 19mm dimension
Motor Connection
Motor connection
Note:
We default delivery 18mm shaft diameter specifications of the motor, if you need 19mm shaft diameter, please contact us in advance.

Tips: Descriptions of rated current and drive voltage of stepper motor

Rated current of stepper motor indicates current peak. The actual working current is not always driven by the rated current. In case that the the capability of the motor to drive the load exceeds the actual load level, the working current can be appropriately reduced to reduce the power dissipation and heating value. However, under the circumstance that the large load should be driven with small-size motor, when ensuring the heating quantity of the motor is within the tolerable range, the rated current can be appropriately reduced. Generally, the motor works or heat dissipation condition is very good. For example, under the situation that the fan is working or the motor swings back and forth, the actual working current of the motor is also smaller than the set one.
The phase voltage indicated on the specification of motor. The drive voltage indicated on the specification is also only the recommended value, so it should not be certainly used this way. In case that the working velocity is very low, the lower drive voltage also can be used. Reversely, to have the working torque of the motor as large as possible when the motor rotates at high velocity, the drive voltage can be increased. Of course, the premise is constant current drive. In case that the recommended voltage is higher a lot than the drive voltage, the set working current can be reduced appropriately to control the heating quantity of the stepper motor.

Stepper Motors vs. Servo Motors: Quick Comparison

In this video, stepper motors and servo motors are compared in different aspects.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Stepper Motor Wiring

In this video, the process of stepper motor wiring is introduced to you. The stepper motor driver can accept NPN or PNP line pulse signals. If the driving pulse is 12V, a 1kΩ resistor is required in series. If it is 24V, a 2kΩ resistor is required.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

6A, 2 phase NEMA 42 bipolar stepper motor, 4-wire, with 1.8° per step, have a holding torque of 20Nm, manufacturer direct sale.

Specifications

BasicsModelATO2150-6004A
Matched the Driver ModelATODSP86 (Click it to see more info)
Step Angle1.8°
Length150mm
Weight8.4kg
Current6A
Resistance0.65Ω
Holding Torque20Nm
Motor Leads4
Rotor Inertia10900g-cm2
Shaft Diameter18mm or 19mm
Technical parametersStep Angle Accuracy±5% (full step, no load)
Resistance Accuracy±10%
Inductance Accuracy±20%
Temperature Rise80℃Max. (rated current, 2 phase on)
Ambient Temperature-10℃~+50℃
Insulation Resistance100MΩ Min. 500VDC
Dielectric Strength1Min. 500VAC·5mA
Shaft Radial Play0.06Max. 450g
Shaft Axial Play0.08Max. 450g

Shaft Diameter 18mm Dimension
Nema 42 18mm dimension
Shaft Diameter 19mm Dimension
Nema 42 19mm dimension
Motor Connection
Motor connection
Note:
We default delivery 18mm shaft diameter specifications of the motor, if you need 19mm shaft diameter, please contact us in advance.

Tips: Descriptions of rated current and drive voltage of stepper motor

Rated current of stepper motor indicates current peak. The actual working current is not always driven by the rated current. In case that the the capability of the motor to drive the load exceeds the actual load level, the working current can be appropriately reduced to reduce the power dissipation and heating value. However, under the circumstance that the large load should be driven with small-size motor, when ensuring the heating quantity of the motor is within the tolerable range, the rated current can be appropriately reduced. Generally, the motor works or heat dissipation condition is very good. For example, under the situation that the fan is working or the motor swings back and forth, the actual working current of the motor is also smaller than the set one.
The phase voltage indicated on the specification of motor. The drive voltage indicated on the specification is also only the recommended value, so it should not be certainly used this way. In case that the working velocity is very low, the lower drive voltage also can be used. Reversely, to have the working torque of the motor as large as possible when the motor rotates at high velocity, the drive voltage can be increased. Of course, the premise is constant current drive. In case that the recommended voltage is higher a lot than the drive voltage, the set working current can be reduced appropriately to control the heating quantity of the stepper motor.

Only registered users can write reviews