Nema 34 Bipolar Stepper motor, 1.8 degree, 4 wires, 4.5A

$132.77
This bipolar Nema 34 stepper motor is most popular, it with 1.8 deg. step angle (200 steps/revolution). Each phase draws 4.5A, allowing for a holding torque of 6.5Nm.
SKU: ATO-STEP-21003445
*
Free Shipping
Delivery date: 6-12 days

Nema 34 bipolar stepper motor, 4.5A, 2 phase 4 wires, which has 1.8 deg. step angle (200 steps/revolution), brand new and direct sale by manufacturer.

Specifications

BasicsModelATO2100-4504A
Matched the Driver ModelATODSP86 (Click it to see more info)
Step Angle1.8°
Length100mm
Weight3kg
Current4.5A
Resistance0.8Ω
Holding Torque6.5Nm
Motor Leads4
Rotor Inertia2500g-cm2
Technical parametersStep Angle Accuracy±5% (full step, no load)
Resistance Accuracy±10%
Inductance Accuracy±20%
Temperature Rise80℃Max. (rated current, 2 phase on)
Ambient Temperature-10℃~+50℃
Insulation Resistance100MΩ Min. 500VDC
Dielectric Strength1Min. 500VAC·5mA
Shaft Radial Play0.06Max. 450g
Shaft Axial Play0.08Max. 450g

Dimension
stepper motor dimension L60-120
Motor Connection
Motor connection
Tips: Methods for judging the angular precision of the stepper motor

The static torque characteristic of the stepper motor is the most important. As for the angular precision of the stepper motor can, It can be directly connected through coupler (no occurrence of the phenomenon of rotation and displacement) with encoder of high resolution ratio. The angle is read into the counter as the figure and calculated with computer. Meanwhile, the result is output through printer or X-Y mapper as the evaluation material of the motor.

  1. Positional accuracy: by taking any point of rotor as the starting point, measure once every step. Once the motor rotates for a circle continuously, the difference between actual position and theoretical one of the rotor can be solved. The error can be represented with the range of positive maximum value and negative one, called position error, which can be represented with the percentage (%) of basic stepping angle.
  2. Stepping angular accuracy: by taking any point of rotor as the starting point, the difference in actually measured and theoretical stepped angles can be solved when the motor rotates continuously, which can be represented with the percentage (%) of theoretical stepping angle, called stepping angular accuracy, represented by the maximum value of (+) and (-) sides in the circle 1.
  3. Hysteresis error: After the rotor rotates positively for one circle from any point and then returns to the original point by reversely rotating for one circle, the maximum value of deviation angle of each measuring position can be taken, called hysteresis error.
Product reviews
I need to adjust the part number purchased on order number 935760
5
Rodkey
Avatar
5/26/2022 8:44 PM
I need to know your part number for your model number 86BYGH280-4504A. This model number was supplied by you and should have an 80mm shaft. Earlier this morning I was given part number ATO-STEP-210203445, but this has a 120mm shaft, so I was given the wrong part number at that time. I need to adjust the part number purchased on your order number 935760 to the correct part number.
Was this review helpful? Yes No (0/0)
ATO Responded
In this case, the correct model number should be:  ATO-STEP-21603404. See specs/drawing on: https://www.ato.com/2-phase-nema-34-stepper-motor-4a-1-8-degree-4-wires
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Nema 34 bipolar stepper motor, 4.5A, 2 phase 4 wires, which has 1.8 deg. step angle (200 steps/revolution), brand new and direct sale by manufacturer.

Specifications

BasicsModelATO2100-4504A
Matched the Driver ModelATODSP86 (Click it to see more info)
Step Angle1.8°
Length100mm
Weight3kg
Current4.5A
Resistance0.8Ω
Holding Torque6.5Nm
Motor Leads4
Rotor Inertia2500g-cm2
Technical parametersStep Angle Accuracy±5% (full step, no load)
Resistance Accuracy±10%
Inductance Accuracy±20%
Temperature Rise80℃Max. (rated current, 2 phase on)
Ambient Temperature-10℃~+50℃
Insulation Resistance100MΩ Min. 500VDC
Dielectric Strength1Min. 500VAC·5mA
Shaft Radial Play0.06Max. 450g
Shaft Axial Play0.08Max. 450g

Dimension
stepper motor dimension L60-120
Motor Connection
Motor connection
Tips: Methods for judging the angular precision of the stepper motor

The static torque characteristic of the stepper motor is the most important. As for the angular precision of the stepper motor can, It can be directly connected through coupler (no occurrence of the phenomenon of rotation and displacement) with encoder of high resolution ratio. The angle is read into the counter as the figure and calculated with computer. Meanwhile, the result is output through printer or X-Y mapper as the evaluation material of the motor.

  1. Positional accuracy: by taking any point of rotor as the starting point, measure once every step. Once the motor rotates for a circle continuously, the difference between actual position and theoretical one of the rotor can be solved. The error can be represented with the range of positive maximum value and negative one, called position error, which can be represented with the percentage (%) of basic stepping angle.
  2. Stepping angular accuracy: by taking any point of rotor as the starting point, the difference in actually measured and theoretical stepped angles can be solved when the motor rotates continuously, which can be represented with the percentage (%) of theoretical stepping angle, called stepping angular accuracy, represented by the maximum value of (+) and (-) sides in the circle 1.
  3. Hysteresis error: After the rotor rotates positively for one circle from any point and then returns to the original point by reversely rotating for one circle, the maximum value of deviation angle of each measuring position can be taken, called hysteresis error.
Product reviews
I need to adjust the part number purchased on order number 935760
5
Rodkey
Avatar
5/26/2022 8:44 PM
I need to know your part number for your model number 86BYGH280-4504A. This model number was supplied by you and should have an 80mm shaft. Earlier this morning I was given part number ATO-STEP-210203445, but this has a 120mm shaft, so I was given the wrong part number at that time. I need to adjust the part number purchased on your order number 935760 to the correct part number.
Was this review helpful? Yes No (0/0)
ATO Responded
In this case, the correct model number should be:  ATO-STEP-21603404. See specs/drawing on: https://www.ato.com/2-phase-nema-34-stepper-motor-4a-1-8-degree-4-wires
Only registered users can write reviews