2-phase Nema 34 Stepper motor, 1.8 degree, 4.5A, 4 wires

$146.77
Low cost Nema 34 bipolar stepper motor with 1.8°step angle (200 steps/revolution). Each phase draws current 4.5A, allowing for a holding torque of 8.4Nm, manufacturer direct sale.
SKU: ATO-STEP-21203445
*
Free Shipping
Delivery date: 6-12 days

2-phase Nema 34 stepper motor, 4 wires bipolar stepper motor with 1.8°step angle (200 steps / revolution). Each phase draws current 4.5A, allowing for a holding torque of 8.4Nm, good quality and high precision.

Specifications

BasicsModelATO2120-4504A
Matched the Driver ModelATODSP86 (Click it to see more info)
Step Angle1.8°
Length120mm
Weight4kg
Current4.5A
Resistance1Ω
Holding Torque8.4Nm
Motor Leads4
Rotor Inertia3200g-cm2
Technical ParametersStep Angle Accuracy±5% (full step, no load)
Resistance Accuracy±10%
Inductance Accuracy±20%
Temperature Rise80℃Max. (rated current, 2 phase on)
Ambient Temperature-10℃~+50℃
Insulation Resistance100MΩ Min. 500VDC
Dielectric Strength1Min. 500VAC·5mA
Shaft Radial Play0.06Max. 450g
Shaft Axial Play0.08Max. 450g

Dimension
stepper motor dimension L60-120
Motor Connection
Motor connection
Tips: How to select servo motor and stepper motor correctly?

It depends on specific application situation, and to put it in a simple way: Nature of load (for example, vertical load or horizontal load), requirements of torque, inertia, speed, accuracy and acceleration and deceleration, requirements of upper control (such as requirements of port interface and communication), whether major controlling mode is position, torque or speed mode, whether power supply is direct or alternating current power supply, or battery powered, and voltage scope. Based on this, we can determine models of motor and supporting drives or controllers.

Product reviews
Use of 2 phase Nema 34 stepper motor
5
Kumar
Avatar
6/3/2021 1:59 AM
Can I user your 2 phase Nema 34 stepper motor with my driver?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, you can.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

2-phase Nema 34 stepper motor, 4 wires bipolar stepper motor with 1.8°step angle (200 steps / revolution). Each phase draws current 4.5A, allowing for a holding torque of 8.4Nm, good quality and high precision.

Specifications

BasicsModelATO2120-4504A
Matched the Driver ModelATODSP86 (Click it to see more info)
Step Angle1.8°
Length120mm
Weight4kg
Current4.5A
Resistance1Ω
Holding Torque8.4Nm
Motor Leads4
Rotor Inertia3200g-cm2
Technical ParametersStep Angle Accuracy±5% (full step, no load)
Resistance Accuracy±10%
Inductance Accuracy±20%
Temperature Rise80℃Max. (rated current, 2 phase on)
Ambient Temperature-10℃~+50℃
Insulation Resistance100MΩ Min. 500VDC
Dielectric Strength1Min. 500VAC·5mA
Shaft Radial Play0.06Max. 450g
Shaft Axial Play0.08Max. 450g

Dimension
stepper motor dimension L60-120
Motor Connection
Motor connection
Tips: How to select servo motor and stepper motor correctly?

It depends on specific application situation, and to put it in a simple way: Nature of load (for example, vertical load or horizontal load), requirements of torque, inertia, speed, accuracy and acceleration and deceleration, requirements of upper control (such as requirements of port interface and communication), whether major controlling mode is position, torque or speed mode, whether power supply is direct or alternating current power supply, or battery powered, and voltage scope. Based on this, we can determine models of motor and supporting drives or controllers.

Product reviews
Use of 2 phase Nema 34 stepper motor
5
Kumar
Avatar
6/3/2021 1:59 AM
Can I user your 2 phase Nema 34 stepper motor with my driver?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, you can.
Only registered users can write reviews