3 phase bipolar stepper motor with 3 lead wires is convenient to adjust the speed, long service life and low maintenance cost. This hybrid stepper motor with 8mm shaft, is used in 3D printer, CNC machine, drawing equipment, sewing machine and robot arm.
Physical Specification
- Model Number: ATO-FY56TC580A
- Flanged Size: 57 x 57mm (Nema 23)
- Motor Length: 106mm
- Shaft Diameter: 8mm
- Number of Leads: 3 wire
- Weight: 1.8kg
Electrical Specification
- Motor Type: Bipolar Stepper
- Step Angle: 1.8°
- Rated Current: 5.8A
- Holding Torque: 2.5 N·m (250 N·cm, 354 Oz.in)
- Phase Resistance: 0.57Ω
- Phase Inductance: 1.2mH
- Rotor Inertia: 720g·cm2
Dimensions (Unit: mm)
L=106mm

Wiring Diagram

Speed-Torque Curve Diagram

Details

Tips: Nema 23 stepper motor troubleshooting
| Faults | Reasons | Solutions |
| Loss step |
|
|
| Motor stalled |
|
|
| Alarm heat indicator light is on |
|
|
Product reviews
Great stepper motors.
Leland
3/24/2022 12:28 AM
These are great hybrid Nema 23 stepper motors. I am using them in my new 3D printer. They have a lot of torque do not get very warm after hours of printing. Highly recommend.
Was this review helpful? (0/0)
Great Nema 23 stepper motor.
Henderson
7/27/2022 7:54 PM
I like this Nema 23 stepper motor. It works great. Wires are long enough to get started. Using on a 2 axis mini mill CNC conversion. Good repeatability and excellent holding power.
Was this review helpful? (0/0)
Only registered users can write reviews