Nema 23 Stepper Motor, 2 Phase, 4.2A, 3N·m

$127.99
2 phase permanent magnet Nema 23 stepper motor, 57 x 57 flanged size, rated current 4.2A, holding torque 3N·m, 4 lead wires, step angle 1.8 degree, accuracy ±5% at full step, motor length 100mm, high torque, compact size and lightweight at low cost, optional shaft diameter 8mm or 6.35mm.
SKU: ATO-STEP-23D420
*
Free Shipping
Delivery date: 6-12 days

Cheap Nema 23 hybrid stepper motor is a four-wire connection motor with encoder, 3N·m, step angle accuracy ±5%, high torque and high precision. The bipolar stepper motor is used in CNC machine, drawing equipment and sewing machine, robot arm, 3D printer and so on.

Physical Specification

  • Model Number: ATO-FY56ED420A
  • Matched the Driver Model: ATO-FYDM504T
  • Flanged Size: 57 x 57mm (Nema 23)
  • Motor Length: 100mm
  • Shaft Diameter: 8mm/ 6.35mm
  • Number of Leads: 4 wire
  • Weight: 1.5kg

Electrical Specification

  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8°
  • Rated Current: 4.2A
  • Holding Torque: 3 N·m (300 N·cm, 425 Oz.in)
  • Phase Resistance: 0.7Ω
  • Phase Inductance: 2.9mH
  • Rotor Inertia: 680g·cm2

Dimensions (Unit: mm)

L=100mm

Dimensions of Nema 23 2 Phase Hybrid Stepper Motor

Wiring Diagram

Wiring Diagram of Nema 23 2 Phase Stepper Motor

Speed-Torque Curve Diagram

Speed Torque Curve Diagram of Nema 23 2 Phase Hybrid Stepper Motor

Details

Nema 23 Stepper Motor 2 Phase 0.43N·m-3N·m Details

Tips: The difference in overload capacity between stepper motor and AC servo motor

Stepper motors generally do not have overload capacity. When using, you must ensure that the load is within the required range. Once overload occurs, normal operation will be affected.

But the AC servo motor is just the opposite. It has a relatively strong overload capacity, and can be more complicated in the application. The load exceeds the rated value and can still function normally, and it will not cause adverse effects because the load is not within the required range.

How to control a stepper motor using a PLC and HMI?
This video shows you how to configure a PLC, HMI, motor driver, and proximity sensor to perform Origin Return (OPR) control of a stepper motor.

Common Stepper Motor Troubleshooting Problems and Tips
In this video, 9 common problems that can occur with stepper motors are discussed, and expert advice is provided for diagnosing and effectively resolving these problems. If you have ever experienced problems with your stepper motor or want to be prepared for any future problems, this video is a must watch.

Controlling Stepper Motors with HMI and PLC for Fixed Cycle Power Delivery
In this video, we explore the step-by-step process of configuring an HMI and PLC to synchronize and manage specific cycle lengths of stepper motors, ensuring accurate power delivery.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

In the case of non-overload, the speed and stop position of the motor only depend on the frequency and pulse number of the pulse signal, and are not affected by the load change. That is, when a pulse signal is added to the motor, the motor rotates through a step angle. The existence of this linear relationship, coupled with the characteristics of the stepper motor having only periodic errors and no cumulative errors. This makes it very simple to use stepper motors to control the speed, position and other control fields.

Warranty

360 Days warranty

Thank you for buying industrial automation products on ATO.com, all products sold by ATO and the partner cover a 360-days-warranty, effective from the date of receiving the products.

What is covered?

ATO is responsible for providing free spare parts, free technical support to assist the customer to repair the defective products until the problem is solved.

What is not covered?

  • Product purchased from anyone other than ATO store or a ATO authorized reseller.
  • Expendable parts.
  • Routine cleaning or normal cosmetic and mechanical wear.
  • Damage from misuse, abuse or neglect.
  • Damage from use of parts other than ATO approved.
  • Damage from use outside the product’s usage or storage parameters.
  • Damage from use of parts not sold by ATO.
  • Damage from modification or incorporation into other products.
  • Damage from repair or replacement of warranted parts by a service provider other than a ATO authorized service provider.
  • Damage caused by the application environment not meeting the product usage requirements and the failure to perform preventive maintenance.
Product reviews
Powerful and quiet.
5
Kostka
Avatar
3/24/2022 12:03 AM
Finally found these hybrid stepper motors that are strong enough. Powerful and quiet. They are great motors and I have yet to have one fail on me. I would recommend this product to my neighbors and friends.
Was this review helpful? Yes No (0/0)
Well built, solid stepper motor.
5
Jimp
Avatar
6/29/2022 2:22 AM
This 2 phase stepper motor is decent for the money, well built, solid and powerful. I feel like I got something better than I had anticipated.
Was this review helpful? Yes No (0/0)
Works great so far, powerful.
5
Craig
Avatar
7/27/2022 8:13 PM
This Nema 23 stepper motor is a solid motor, works great so far. Good holding torque with the right stepper driver. Very pleased with the results, and I will buy from ATO again.
Was this review helpful? Yes No (0/0)
For my CNC machine
5
Manatee
Avatar
11/3/2022 12:23 AM
I like this nema 23 stepper motor very much. I am using them in my new CNC machine. It's been in use for three months now. It's great that a small nema 23 stepper motor can do so much.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Cheap Nema 23 hybrid stepper motor is a four-wire connection motor with encoder, 3N·m, step angle accuracy ±5%, high torque and high precision. The bipolar stepper motor is used in CNC machine, drawing equipment and sewing machine, robot arm, 3D printer and so on.

Physical Specification

  • Model Number: ATO-FY56ED420A
  • Matched the Driver Model: ATO-FYDM504T
  • Flanged Size: 57 x 57mm (Nema 23)
  • Motor Length: 100mm
  • Shaft Diameter: 8mm/ 6.35mm
  • Number of Leads: 4 wire
  • Weight: 1.5kg

Electrical Specification

  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8°
  • Rated Current: 4.2A
  • Holding Torque: 3 N·m (300 N·cm, 425 Oz.in)
  • Phase Resistance: 0.7Ω
  • Phase Inductance: 2.9mH
  • Rotor Inertia: 680g·cm2

Dimensions (Unit: mm)

L=100mm

Dimensions of Nema 23 2 Phase Hybrid Stepper Motor

Wiring Diagram

Wiring Diagram of Nema 23 2 Phase Stepper Motor

Speed-Torque Curve Diagram

Speed Torque Curve Diagram of Nema 23 2 Phase Hybrid Stepper Motor

Details

Nema 23 Stepper Motor 2 Phase 0.43N·m-3N·m Details

Tips: The difference in overload capacity between stepper motor and AC servo motor

Stepper motors generally do not have overload capacity. When using, you must ensure that the load is within the required range. Once overload occurs, normal operation will be affected.

But the AC servo motor is just the opposite. It has a relatively strong overload capacity, and can be more complicated in the application. The load exceeds the rated value and can still function normally, and it will not cause adverse effects because the load is not within the required range.

Product reviews
Powerful and quiet.
5
Kostka
Avatar
3/24/2022 12:03 AM
Finally found these hybrid stepper motors that are strong enough. Powerful and quiet. They are great motors and I have yet to have one fail on me. I would recommend this product to my neighbors and friends.
Was this review helpful? Yes No (0/0)
Well built, solid stepper motor.
5
Jimp
Avatar
6/29/2022 2:22 AM
This 2 phase stepper motor is decent for the money, well built, solid and powerful. I feel like I got something better than I had anticipated.
Was this review helpful? Yes No (0/0)
Works great so far, powerful.
5
Craig
Avatar
7/27/2022 8:13 PM
This Nema 23 stepper motor is a solid motor, works great so far. Good holding torque with the right stepper driver. Very pleased with the results, and I will buy from ATO again.
Was this review helpful? Yes No (0/0)
For my CNC machine
5
Manatee
Avatar
11/3/2022 12:23 AM
I like this nema 23 stepper motor very much. I am using them in my new CNC machine. It's been in use for three months now. It's great that a small nema 23 stepper motor can do so much.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

Nema 23 Stepper Motor, 2 Phase, 3.5A, 2.2N·m

ATO-STEP-23C350
$100.99
High torque Nema 23 hybrid stepper motor for sale, 3.5A, holding torque at 2.2N·m, 2 phase 4 lead wires, shaft size of 8mm and 6.35mm available, motor length 82mm. This permanent magnet stepper motor is used in 3D printer, CNC machine, robot arm and other mechanical equipment, low noise and low price.