Nema 23 Stepper Motor, 2.8A, 1.8 degree, 2 phase 4 wires

$73.92
2-phase 4-wire Nema 23 stepper motor, with 1.8 deg. step angle(200 steps/revolution). Each phase draws current 2.8A, allowing for a holding torque of 1.26Nm. Low price and high quality, direct sale by manufacturer.
SKU: ATO-STEP-2802304
Free Shipping
Delivery date: 6-12 days

Nema 23 Stepper motor, 1.26Nm in 56mm, 1.8 degree, manufacturer direct sale.

Specification

Electrical SpecificationModelATO57STH56-2804
Matched Driver ModelATODSP57(Click it to see more info)
Step Angle1.8°
Holding Torque1.26Nm
Rated Current/phase2.8A
Phase Resistance0.9Ω
Inductance2.5mH
Rotor Inertia280g-cm2
Physical SpecificationFrame Size57 x 57mm
Length56mm
Shaft DiameterΦ6.35mm
Shaft Length19mm
Motor Leads4
Weight0.68kg
Technical ParametersStep Angle Accuracy±5% (full step, no load)
Resistance Accuracy±10%
Inductance Accuracy±20%
Temperature Rise80℃ Max. (rated current, 2 phase on)
Ambient Temperature-20℃~+50℃
Insulation Resistance100MΩ Min. 500VDC
Dielectric Strength500V AC for one minute
Shaft Radial Play0.02Max. 450g
Shaft Axial Play0.08Max. 450g
Quality AssuranceWarranty Period12 months
CertificateCE, ROHs, ISO/SGS9001

Dimensions: (Unit=mm)

NEMA 23 hybrid stepper motor dimensionsL Max=56mm

Wiring Diagram

NEMA 23 hybrid stepper motor wiring diagram

Tips: How to solve the problem about heating of the stepper motor?

  1. Reducing heating of the motor means reducing copper and iron loss. There are two directions for reducing the copper loss, including reducing resistance and current. It is thus required to choose the motor with small resistance and rated current when selecting the motor. As for 2-phase motor, the parallel cannot be used if the series one could be used. However, it usually collides against the requirements of torque and high velocity.
  2. As for the selected motor, it is necessary to make full use of automatic semi-flow control and offline state functions of the stepper motor driver, as for former of which the current will be reduced when the motor is at static state while as for the latter of which the current is cut off.
  3. In addition, as the current waveform approaches the sine and has less harmonic wave, the heating of motor with subdivided driver is less. There are few methods or reducing the iron loss. It is related to the voltage grade. Though high voltage driver motor could lead to the rise in high speed characteristic, the increase in heating is also brought.
  4. It is necessary to choose drive motor with proper voltage grade, giving considerations into indexes such as stability, heating and noise, etc.

How to control a stepper motor using a PLC and HMI?
This video shows you how to configure a PLC, HMI, motor driver, and proximity sensor to perform Origin Return (OPR) control of a stepper motor.

Common Stepper Motor Troubleshooting Problems and Tips
In this video, 9 common problems that can occur with stepper motors are discussed, and expert advice is provided for diagnosing and effectively resolving these problems. If you have ever experienced problems with your stepper motor or want to be prepared for any future problems, this video is a must watch.

Controlling Stepper Motors with HMI and PLC for Fixed Cycle Power Delivery
In this video, we explore the step-by-step process of configuring an HMI and PLC to synchronize and manage specific cycle lengths of stepper motors, ensuring accurate power delivery.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

In the case of non-overload, the speed and stop position of the motor only depend on the frequency and pulse number of the pulse signal, and are not affected by the load change. That is, when a pulse signal is added to the motor, the motor rotates through a step angle. The existence of this linear relationship, coupled with the characteristics of the stepper motor having only periodic errors and no cumulative errors. This makes it very simple to use stepper motors to control the speed, position and other control fields.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
Nema 23 Hybrid stepper motor
5
Bruce
Avatar
8/19/2020 6:55 PM
Do you know how much voltage your Nema 23 Hybrid stepper motor can take?
Was this review helpful? Yes No (0/0)
ATO Responded
The voltage of the stepper motor is relative to the controller, and he voltage of the Nema 23 Hybrid stepper motor is between 24-36V.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Nema 23 Stepper motor, 1.26Nm in 56mm, 1.8 degree, manufacturer direct sale.

Specification

Electrical SpecificationModelATO57STH56-2804
Matched Driver ModelATODSP57(Click it to see more info)
Step Angle1.8°
Holding Torque1.26Nm
Rated Current/phase2.8A
Phase Resistance0.9Ω
Inductance2.5mH
Rotor Inertia280g-cm2
Physical SpecificationFrame Size57 x 57mm
Length56mm
Shaft DiameterΦ6.35mm
Shaft Length19mm
Motor Leads4
Weight0.68kg
Technical ParametersStep Angle Accuracy±5% (full step, no load)
Resistance Accuracy±10%
Inductance Accuracy±20%
Temperature Rise80℃ Max. (rated current, 2 phase on)
Ambient Temperature-20℃~+50℃
Insulation Resistance100MΩ Min. 500VDC
Dielectric Strength500V AC for one minute
Shaft Radial Play0.02Max. 450g
Shaft Axial Play0.08Max. 450g
Quality AssuranceWarranty Period12 months
CertificateCE, ROHs, ISO/SGS9001

Dimensions: (Unit=mm)

NEMA 23 hybrid stepper motor dimensionsL Max=56mm

Wiring Diagram

NEMA 23 hybrid stepper motor wiring diagram

Tips: How to solve the problem about heating of the stepper motor?

  1. Reducing heating of the motor means reducing copper and iron loss. There are two directions for reducing the copper loss, including reducing resistance and current. It is thus required to choose the motor with small resistance and rated current when selecting the motor. As for 2-phase motor, the parallel cannot be used if the series one could be used. However, it usually collides against the requirements of torque and high velocity.
  2. As for the selected motor, it is necessary to make full use of automatic semi-flow control and offline state functions of the stepper motor driver, as for former of which the current will be reduced when the motor is at static state while as for the latter of which the current is cut off.
  3. In addition, as the current waveform approaches the sine and has less harmonic wave, the heating of motor with subdivided driver is less. There are few methods or reducing the iron loss. It is related to the voltage grade. Though high voltage driver motor could lead to the rise in high speed characteristic, the increase in heating is also brought.
  4. It is necessary to choose drive motor with proper voltage grade, giving considerations into indexes such as stability, heating and noise, etc.
Product reviews
Nema 23 Hybrid stepper motor
5
Bruce
Avatar
8/19/2020 6:55 PM
Do you know how much voltage your Nema 23 Hybrid stepper motor can take?
Was this review helpful? Yes No (0/0)
ATO Responded
The voltage of the stepper motor is relative to the controller, and he voltage of the Nema 23 Hybrid stepper motor is between 24-36V.
Only registered users can write reviews