High Torque Nema 23 Stepper Motor, 3A, 1.8 degree, 4 wires

$73.92
Nema 23 stepper motor with high quality, 2.2Nm holding torque, 2 phase 4 wires, 1.8 deg. step angle, manufacturer direct sale.
SKU: ATO-STEP-822303
Free Shipping
Delivery date: 6-12 days

Nema 23 Stepper motor, 2.2Nm in 82mm, 1.8 degree, manufacturer direct sale.

Specification

Electrical SpecificationModelATO57STH82-3004
Matched Driver ModelATODSP57(Click it to see more info)
Step Angle1.8°
Holding Torque2.2Nm
Rated Current/phase3.0A
Phase Resistance1.2Ω
Inductance4mH
Rotor Inertia600g-cm2
Physical SpecificationFrame Size57 x 57mm
Length82mm
Shaft DiameterΦ6.35mm
Shaft Length19mm
Motor Leads4
Weight1.2kg
Technical ParametersStep Angle Accuracy±5% (full step, no load)
Resistance Accuracy±10%
Inductance Accuracy±20%
Temperature Rise80℃ Max. (rated current, 2 phase on)
Ambient Temperature-20℃~+50℃
Insulation Resistance100MΩ Min. 500VDC
Dielectric Strength500V AC for one minute
Shaft Radial Play0.02Max. 450g
Shaft Axial Play0.08Max. 450g
Quality AssuranceWarranty Period12 months
CertificateCE, ROHs, ISO/SGS9001

Nema 23 Stepper Motor Dimensions: (Unit=mm)

NEMA 23 hybrid stepper motor dimensionsL Max=82mm

Nema 23 Stepper Motor Wiring Diagram

NEMA 23 hybrid stepper motor wiring diagram

Tips: Application of stepper motor in transverse sealing

As for the continuous packing machine, transverse sealing is an important actuator and also one of complicated mechanism of packaging machine. For the packing film with color mark, there is strict requirement for its seal and cut-off position. To improve the cut-off accuracy, eccentric chain wheel mechanism and crank shaft guide mechanism have developed in succession. However, there are many disadvantages over these mechanisms, like difficult in adjustment and low reliability. However, the main reason for these disadvantages is constant speed transverse sealing of transversely sealed wheel and positioning off according to the technological requirement.
Speed synchronization can be realized for the stepper motor direct transverse seal wheel. Film feed wheel of continuous packing machine feed films continuously. During the transverse sealing, the linear speed of transverse sealing is required to be synchronized with the speed of film feed to avoid tearing film and thin film. When the bag length is changed, it is necessary to change it by changing the rotational velocity of the transverse sealing wheel, but it takes certain time to realize transverse sealing. That is, it takes constant time to seal it transversely, contact and leave it, or it will not sealed tightly. The total time for the transverse sealing wheel to rotate for a circle and that for transverse sealing is constant. To satisfy the requirements for speed synchronization, the rotational speed of the stepper motor within one circle can be divided into two parts: firstly satisfying the requirements of speed synchronization and satisfying the requirements of non-load part for rotating for one circle.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
Runs smoothly with little noise
5
Morgan
Avatar
6/15/2018 2:35 AM
Bought this stepper motor driver kit together. It runs smoothly with little noise right now.
Was this review helpful? Yes No (0/0)
I used this Nema 23 stepper motor to control a Z-Axis on a milling machine
5
Lynn Ledger
Avatar
11/30/2018 12:25 AM
I used this Nema 23 stepper motor to control a Z-Axis on a milling machine. It was hooked up to a ball screw and linear slide. I got a great feed rate and excellent positioning from it, all at a good price point.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Nema 23 Stepper motor, 2.2Nm in 82mm, 1.8 degree, manufacturer direct sale.

Specification

Electrical SpecificationModelATO57STH82-3004
Matched Driver ModelATODSP57(Click it to see more info)
Step Angle1.8°
Holding Torque2.2Nm
Rated Current/phase3.0A
Phase Resistance1.2Ω
Inductance4mH
Rotor Inertia600g-cm2
Physical SpecificationFrame Size57 x 57mm
Length82mm
Shaft DiameterΦ6.35mm
Shaft Length19mm
Motor Leads4
Weight1.2kg
Technical ParametersStep Angle Accuracy±5% (full step, no load)
Resistance Accuracy±10%
Inductance Accuracy±20%
Temperature Rise80℃ Max. (rated current, 2 phase on)
Ambient Temperature-20℃~+50℃
Insulation Resistance100MΩ Min. 500VDC
Dielectric Strength500V AC for one minute
Shaft Radial Play0.02Max. 450g
Shaft Axial Play0.08Max. 450g
Quality AssuranceWarranty Period12 months
CertificateCE, ROHs, ISO/SGS9001

Nema 23 Stepper Motor Dimensions: (Unit=mm)

NEMA 23 hybrid stepper motor dimensionsL Max=82mm

Nema 23 Stepper Motor Wiring Diagram

NEMA 23 hybrid stepper motor wiring diagram

Tips: Application of stepper motor in transverse sealing

As for the continuous packing machine, transverse sealing is an important actuator and also one of complicated mechanism of packaging machine. For the packing film with color mark, there is strict requirement for its seal and cut-off position. To improve the cut-off accuracy, eccentric chain wheel mechanism and crank shaft guide mechanism have developed in succession. However, there are many disadvantages over these mechanisms, like difficult in adjustment and low reliability. However, the main reason for these disadvantages is constant speed transverse sealing of transversely sealed wheel and positioning off according to the technological requirement.
Speed synchronization can be realized for the stepper motor direct transverse seal wheel. Film feed wheel of continuous packing machine feed films continuously. During the transverse sealing, the linear speed of transverse sealing is required to be synchronized with the speed of film feed to avoid tearing film and thin film. When the bag length is changed, it is necessary to change it by changing the rotational velocity of the transverse sealing wheel, but it takes certain time to realize transverse sealing. That is, it takes constant time to seal it transversely, contact and leave it, or it will not sealed tightly. The total time for the transverse sealing wheel to rotate for a circle and that for transverse sealing is constant. To satisfy the requirements for speed synchronization, the rotational speed of the stepper motor within one circle can be divided into two parts: firstly satisfying the requirements of speed synchronization and satisfying the requirements of non-load part for rotating for one circle.

Product reviews
Runs smoothly with little noise
5
Morgan
Avatar
6/15/2018 2:35 AM
Bought this stepper motor driver kit together. It runs smoothly with little noise right now.
Was this review helpful? Yes No (0/0)
I used this Nema 23 stepper motor to control a Z-Axis on a milling machine
5
Lynn Ledger
Avatar
11/30/2018 12:25 AM
I used this Nema 23 stepper motor to control a Z-Axis on a milling machine. It was hooked up to a ball screw and linear slide. I got a great feed rate and excellent positioning from it, all at a good price point.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews