Low cost bipolar closed loop stepper motor for sale, two phase, wire colors of blue, red, green and black, no lost step, low noise, high torque and high efficiency.
Physical Specification
- Model Number: ATO-FY56EM420BC1
- Matched the Driver Model: ATO-FYDB506T
- Flanged Size: 57 x 57mm (Nema 23)
- Motor Length: 76mm
- Shaft Diameter: 8mm
- Number of Leads: 4 wire
- Weight: 1kg
Electrical Specification
- Motor Type: Bipolar Closed Loop Stepper
- Step Angle: 1.8°
- Rated Current: 4.2A
- Holding Torque: 1.2 N·m (120 N·cm, 170 Oz.in)
- Phase Resistance: 0.44Ω
- Phase Inductance: 1.4mH
- Rotor Inertia: 280g·cm2
Dimensions (Unit: mm)
L=76mm

Motor & Encoder Wiring Diagram

Speed-Torque Curve Diagram

Details

Tips: Precautions for cleaning stepper motors
If the permanent magnet stepper motor adheres to a lot of dust, it may cause it to run inefficiently. Therefore, it is necessary to clean the stepper motor. The following are the issues that need to be paid attention to when cleaning the stepper motor.
- The cleaning must be carried out with the power supply cut off. Wrong cleaning will cause safety hazards to the best stepper motor, threatening the safety of the motor. Therefore, the power supply of the motor must be cut off before the cleaning can be performed.
- The stepper motor needs to be protected during cleaning. The purpose of cleaning the stepper motor is to restore its working state, but if there is a wrong operation during the cleaning, it will cause the motor to be damaged.
Product reviews
Very nice closed loop stepper motor
John
3/10/2022 6:35 PM
This is a very nice Nema 23 closed loop stepper motor. It has plenty of torque and speed for my application. Great price and work as described. I am looking into getting a tiny motor controller.
Was this review helpful? (0/0)
Work perfectly.
zzt
4/26/2022 2:11 AM
Well packaged, just what I needed. This stepper motor performs very well for my application and exceeded my expectations.
Was this review helpful? (0/0)
Great price and quality.
Leland
6/29/2022 12:54 AM
This is a great Nema 23 stepper motor and is very strong. It always precise and doesn’t miss a step. If the power the stepper motor offers is enough for your application, this is definitely recommended for whatever you are going to do with it.
Was this review helpful? (0/0)
Very pleased with my purchase.
Della
7/27/2022 12:33 AM
This closed loop Nema 23 stepper motor is awesome. It holds its torque at high speeds really well, and has driven my CNC fantastically under very rapid speed and heavy spindle loads. Very pleased with my purchase.
Was this review helpful? (0/0)
Only registered users can write reviews