Mini Clamp Meter True RMS AC/DC Current 600 amp

$105.39
$117.10
The mini clamp meter is a digital clamp meter can be used to measuring AC/DC current 0-600A, AC/DC voltage 0-600V, capacitance 0-100mF, temperature -50℃~+1000℃ (-58℉~1832℉), resistance 0-60MΩ and frequency 0-10MHz. The maximum jaw opening size is 28mm. Digital AC/DC clamp meter has special functions of True RMS, diode test, backlight and inspection light.
SKU: ATO-CLAM-3268D
Free Shipping
Delivery date: 6-12 days

Digital clamp meter has AC/DC current (inrush current) range 0-600A, TRMS/temperature/capacitance functions, maximum jaw opening size 28mm, 4 digit display and maximum value 5999.

Specification:

BasicsModelATO-UA3268D
Weight160g
Size (L*W*H)185*51*25mm
Display4 digit LCD display
Maximum display value5999
Power supplyDC 3V, 2 AAA batteries
Maximum jaw opening size28mm
Woring environmentTemperature: 5℃~35℃ (41℉~95℉), relative humidity:<75%
Storage temperature-10℃~+50℃ (14℉~122℉)
AccessoriesA pair of test probes, a pair of temperature probes, a user manual, 2 AAA batteries
FunctionsItemRangeAccuracy
DC current600A±(2.0%+10 digits)
AC current600A±(2.0%+10 digits)
Inrush current600A±(2.0%+10 digits)
DC voltage600V±(0.8%+5 digits)
AC voltage600V±(1.2%+5 digits)
Resistance60MΩ±(0.8%+3 digits)
Frequency10MHz±(0.5%+3 digits)
Capacitance100mF±(3.0%+5 digits)
Temperature-50℃~+1000℃ (-58℉~1832℉)±(1.0%+4 digits)
Special functionsTRMSTrue RMS measurement for sine wave signal
Diode testDisplay forward voltage value of diode
On-off buzzerContinuity test buzzer
Data holdHold the reading when taking a measurement
Automatic power offAutomatic power off when 15 minutes no operation
Overload protectionOverload protection for 100% range
Range selectionAutomatic range selection and manual range selection
BacklightBacklight for LCD display
Inspection lightInspection light for clamp operation

Details

Mini Clamp Meter Details

Tips: What is the different between clamp meter and digital multimeter?
In the industrial production process, some operating low-voltage equipment or circuits need to know the current situation at any time, but the equipment must be operated continuously. In order not to affect the production or bring unnecessary losses, it is impossible to connect the digital multimeter to the equipment in series after powering off, and then measure current in the circuit. Therefore, in order to measure the current without disconnecting the circuit, the clamp meter is developed from the basic digital multimeter. Although it is less accurate than a multimeter, it provides an effective reference standard for maintenance personnel. And it is simple and convenient to operate. Therefore, the difference between a clamp meter and a digital multimeter is that the way of measuring current. The clamp meter can directly measure the current in the line by pressing the trigger to open the jaws and placing the single line to be tested in the middle of the clamp without disconnecting the power line. While the ordinary digital multimeter measures the current, the multimeter black and red pointer string must be connected the power line in series.

Clamp Meter: Your Ultimate Tool for Electrical Testing

Learn how a clamp meter works and why it's an essential device for safe and efficient electrical troubleshooting.

Why a Clamp Meter is Essential for You?

Discover why a clamp meter is the ultimate tool for diagnosing and measuring electrical systems with ease and precision.

Product reviews
A right-hand man at work
5
vickey
Avatar
9/19/2023 7:18 PM
I bought this mini clamp meter for use at work to test AC and DC currents in circuits up to 600 amps. It is small and portable and very easy to carry to various workplaces. The measurements are very accurate and I can fully trust its data. Moreover, it is also very easy to operate, so even non-professional electricians can use it easily. All in all, this mini clamp meter meets my work needs and is my right-hand man at work!
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Digital clamp meter has AC/DC current (inrush current) range 0-600A, TRMS/temperature/capacitance functions, maximum jaw opening size 28mm, 4 digit display and maximum value 5999.

Specification:

BasicsModelATO-UA3268D
Weight160g
Size (L*W*H)185*51*25mm
Display4 digit LCD display
Maximum display value5999
Power supplyDC 3V, 2 AAA batteries
Maximum jaw opening size28mm
Woring environmentTemperature: 5℃~35℃ (41℉~95℉), relative humidity:<75%
Storage temperature-10℃~+50℃ (14℉~122℉)
AccessoriesA pair of test probes, a pair of temperature probes, a user manual, 2 AAA batteries
FunctionsItemRangeAccuracy
DC current600A±(2.0%+10 digits)
AC current600A±(2.0%+10 digits)
Inrush current600A±(2.0%+10 digits)
DC voltage600V±(0.8%+5 digits)
AC voltage600V±(1.2%+5 digits)
Resistance60MΩ±(0.8%+3 digits)
Frequency10MHz±(0.5%+3 digits)
Capacitance100mF±(3.0%+5 digits)
Temperature-50℃~+1000℃ (-58℉~1832℉)±(1.0%+4 digits)
Special functionsTRMSTrue RMS measurement for sine wave signal
Diode testDisplay forward voltage value of diode
On-off buzzerContinuity test buzzer
Data holdHold the reading when taking a measurement
Automatic power offAutomatic power off when 15 minutes no operation
Overload protectionOverload protection for 100% range
Range selectionAutomatic range selection and manual range selection
BacklightBacklight for LCD display
Inspection lightInspection light for clamp operation

Details

Mini Clamp Meter Details

Tips: What is the different between clamp meter and digital multimeter?
In the industrial production process, some operating low-voltage equipment or circuits need to know the current situation at any time, but the equipment must be operated continuously. In order not to affect the production or bring unnecessary losses, it is impossible to connect the digital multimeter to the equipment in series after powering off, and then measure current in the circuit. Therefore, in order to measure the current without disconnecting the circuit, the clamp meter is developed from the basic digital multimeter. Although it is less accurate than a multimeter, it provides an effective reference standard for maintenance personnel. And it is simple and convenient to operate. Therefore, the difference between a clamp meter and a digital multimeter is that the way of measuring current. The clamp meter can directly measure the current in the line by pressing the trigger to open the jaws and placing the single line to be tested in the middle of the clamp without disconnecting the power line. While the ordinary digital multimeter measures the current, the multimeter black and red pointer string must be connected the power line in series.

Product reviews
A right-hand man at work
5
vickey
Avatar
9/19/2023 7:18 PM
I bought this mini clamp meter for use at work to test AC and DC currents in circuits up to 600 amps. It is small and portable and very easy to carry to various workplaces. The measurements are very accurate and I can fully trust its data. Moreover, it is also very easy to operate, so even non-professional electricians can use it easily. All in all, this mini clamp meter meets my work needs and is my right-hand man at work!
Was this review helpful? Yes No (0/0)
Only registered users can write reviews