Clamp Meter for True RMS AC Current 600A Measurement

$88.89
$98.77
AC clamp meter has AC current range 0-600A, AC/DC voltage range 0-600V, resistance range 0-20MΩ, maximum display value 1999 and maximum jaw opening size 36mm. True RMS clamp meter can be used for sine wave signal measurement. AC clamp meter also has special functions of automatic power off, back light and LED torch.
SKU: ATO-CLAM-2018A
Free Shipping
Delivery date: 6-12 days

Digital clamp meter has AC current range 0-600A, TRMS function, maximum jaw opening size 36mm, 4 digit display and maximum value 1999.

Specification:

BasicsModelATO-UA2018A
Weight530g
Size (L*W*H)210*78*35mm
Display4 digit LCD display
Maximum display value1999
Power supplyDC 4.5V, 3 AAA batteries
Maximum jaw opening size36mm
Woring environmentTemperature: 5℃~35℃ (41℉~95℉), relative humidity:<75%
Storage temperature-10℃~+50℃ (14℉~122℉)
AccessoriesA pair of test probes, a user manual, 3 AAA batteries
FunctionsItemRangeAccuracy
AC current600A±(3.0%+10 digits)
DC voltage600V±(0.8%+2 digits)
AC voltage600V±(1.0%+10 digits)
Resistance20MΩ±(1.2%+2 digits)
Special functionsTRMSTrue RMS measurement for sine wave signal
Diode testDisplay forward voltage value of diode
On-off buzzerContinuity test buzzer
Data holdHold the reading when taking a measurement
Automatic power offAutomatic power off when 15 minutes no operation
Overload protectionOverload protection for 100% range
Range selectionManual range selection
BacklightBacklight for LCD display
Inspection lightInspection light for clamp operation
LED torchA LED torch for night lighting

Details

600A AC Current Clamp Meter Details

Tips: Resistance measurement of AC clamp meter
To avoid damage to the AC clamp meter or the device under test, all power supply to the circuit under test should be cut off and all high voltage capacitors fully discharged before measuring the resistance.
Resistance measurement:

  1. Turn the rotate dial to the resistance function.
  2. Insert the black test lead into the COM jack,and the red test lead into the resistance jack.
  3. Use the other end of the test pen to measure the resistance of the circuit under test.
  4. Read the measured resistance value from the LCD.

Note:

  1. The measured resistance on the circuit will usually differ from the resistance rating.
  2. In the measurement of low resistance, in order to measure accurately, short-circuit the two test leads, read out the resistance of the test leads short-circuit, after measuring the resistance to be measured to be subtracted from the resistance.
  3. At 20MΩ, the meter may take a few seconds to stabilize the reading, which is normal for high resistance measurements.
  4. When the meter is open, the display will show '0L', indicating that the measured value is out of range.

Clamp Meter: Your Ultimate Tool for Electrical Testing

Learn how a clamp meter works and why it's an essential device for safe and efficient electrical troubleshooting.

Why a Clamp Meter is Essential for You?

Discover why a clamp meter is the ultimate tool for diagnosing and measuring electrical systems with ease and precision.

Product reviews
I'm very satisfied with this clamp meter
5
Evan
Avatar
9/9/2025 1:00 AM
This clamp meter has been a breeze to use since I got it. It has a wide enough measurement range, making it easy to test both current and voltage, with clear readings. The back light and small flashlight are especially handy in low-light conditions, and the auto-off feature saves battery life. Overall, it feels solid and well-built.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Digital clamp meter has AC current range 0-600A, TRMS function, maximum jaw opening size 36mm, 4 digit display and maximum value 1999.

Specification:

BasicsModelATO-UA2018A
Weight530g
Size (L*W*H)210*78*35mm
Display4 digit LCD display
Maximum display value1999
Power supplyDC 4.5V, 3 AAA batteries
Maximum jaw opening size36mm
Woring environmentTemperature: 5℃~35℃ (41℉~95℉), relative humidity:<75%
Storage temperature-10℃~+50℃ (14℉~122℉)
AccessoriesA pair of test probes, a user manual, 3 AAA batteries
FunctionsItemRangeAccuracy
AC current600A±(3.0%+10 digits)
DC voltage600V±(0.8%+2 digits)
AC voltage600V±(1.0%+10 digits)
Resistance20MΩ±(1.2%+2 digits)
Special functionsTRMSTrue RMS measurement for sine wave signal
Diode testDisplay forward voltage value of diode
On-off buzzerContinuity test buzzer
Data holdHold the reading when taking a measurement
Automatic power offAutomatic power off when 15 minutes no operation
Overload protectionOverload protection for 100% range
Range selectionManual range selection
BacklightBacklight for LCD display
Inspection lightInspection light for clamp operation
LED torchA LED torch for night lighting

Details

600A AC Current Clamp Meter Details

Tips: Resistance measurement of AC clamp meter
To avoid damage to the AC clamp meter or the device under test, all power supply to the circuit under test should be cut off and all high voltage capacitors fully discharged before measuring the resistance.
Resistance measurement:

  1. Turn the rotate dial to the resistance function.
  2. Insert the black test lead into the COM jack,and the red test lead into the resistance jack.
  3. Use the other end of the test pen to measure the resistance of the circuit under test.
  4. Read the measured resistance value from the LCD.

Note:

  1. The measured resistance on the circuit will usually differ from the resistance rating.
  2. In the measurement of low resistance, in order to measure accurately, short-circuit the two test leads, read out the resistance of the test leads short-circuit, after measuring the resistance to be measured to be subtracted from the resistance.
  3. At 20MΩ, the meter may take a few seconds to stabilize the reading, which is normal for high resistance measurements.
  4. When the meter is open, the display will show '0L', indicating that the measured value is out of range.
Product reviews
I'm very satisfied with this clamp meter
5
Evan
Avatar
9/9/2025 1:00 AM
This clamp meter has been a breeze to use since I got it. It has a wide enough measurement range, making it easy to test both current and voltage, with clear readings. The back light and small flashlight are especially handy in low-light conditions, and the auto-off feature saves battery life. Overall, it feels solid and well-built.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews