Favorable price display controller is a digital panel meter used for torque sensors. It is equipped with an RS485 interface for real-time measurement and monitoring and is available in transmit output of 4-20mA, 0-10V, -5V~+5V, and RS232 interface.
Specification
| Model | ATO-DPM-D056 |
| Supply Voltage | 12~30V DC,<5W |
| Supply Bridge Voltage | 5V/100mA, Proportional Acquisition |
| Default Configuration | RS485 Interface (Modbus RTU Protocol) |
| Additional Transmission Output (Optional) | 0~10 or -5~5V, 4-20mA, RS232 Interface |
| Comprehensive Accuracy | 0.1% |
| Non-linearity | 0.02% |
| Fastest Sampling Speed | 3200 times/s |
| Analog Input Signal Range | -15~15mV |
| Display Graduation | 999999 or 99.999 |
| Temperature Drift | <20ppm |
| Relative Temperature | -20~70℃ |
| Relative Humidity | <90%(No condensation) |
Dimension (Unit: mm)

Detail

Wiring Diagram


Application

Tips: How to choose a display controller for torque sensor & load cell?
Choosing the right display controller for a torque sensor or load cell is crucial for accurate measurements and efficient system integration. Here are key factors to consider:
- Sensor Compatibility: Ensure the controller supports your sensor’s signal output type (mV/V, 4-20mA, ±10V, or digital output like RS485/Modbus).
- Accuracy & Resolution: Choose a high-resolution controller (e.g., 24-bit ADC) for precise readings.
- Display & Interface: Look for a clear LCD/LED display and user-friendly interface for easy setup.
- Output & Connectivity: Ensure it supports necessary outputs like analog signals, RS485/Modbus, or relay outputs for automation.
- Sampling Rate: A high-speed sampling rate is needed for dynamic force measurement.
- Environmental Protection: Consider IP-rated enclosures for harsh environments.
- Mounting & Power Supply: Ensure it fits your installation needs and power availability.
Product reviews
Compatible Accessories
Vicona
8/20/2025 12:44 AM
Which reaction torque sensors are compatible with the ATO-DPM-D056? I only need a range of approximately 1-15 Nm.
Was this review helpful? (0/0)
TEDS Sensor Controller
Chiles
9/26/2025 2:33 AM
I saw in the description that this sensor also has a TEDS version. What controller should I use with a 10 N sensor with TEDS?
Was this review helpful? (0/0)
Some questions
Kenya
1/29/2026 7:27 PM
1. Is this controller compatible with the miniature rotary torque sensor? 2. Is the software included on the USB drive? 3. Can the software connect directly to the torque sensor without using the controller?
Was this review helpful? (0/0)
Matching instrument
Corey
4/30/2026 1:59 AM
I would like to inquire about purchasing a miniature rotary torque sensor (measuring range 0.1-5 Nm). Do I need this matching instrument? Also, do you have any accompanying software? Or how should I record and process data?
Was this review helpful? (0/0)
Time delay
Toray
9/2/2026 12:54 AM
Hello, I am using a miniature rotary torque sensor with an ATO-DPM-D056 interface, and we have observed a time delay of approximately 150 milliseconds in the output signal. Is this normal?
Was this review helpful? (0/0)
Only registered users can write reviews
Customers who bought this item also bought
Reaction Torque Sensor, Dual Flange, 20 Nm/100 Nm/5000 Nm to 10000 Nm
ATO-TQS-S01
$193.92
Torque sensor is a strain gauge sensor for static torque measurement. Static torque sensor has double-flange, a 5 pin male plug and no mounting base so it can be easy to install. Reaction torque sensors have a capacity range from 20 Nm/300 Nm/2000 Nm to 10000 Nm and can measure both forward and reverse torque.
Micro Rotary Torque Sensor for Dynamic Torque Measurement, 0.1-5 Nm
ATO-TQS-D02
$914.02
Rotary torque sensor is a strain gauge sensor for dynamic micro torque measurement. It has two shafts, a 5 pin male plug and no mounting base. Micro torque sensors have a capacity range from 0.1 Nm/0.2 Nm/0.3 Nm/0.5 Nm/1 Nm/3 Nm to 5 Nm. Rotary torque transducer can measure both forward and reverse torque.
USB to RS485 Converter
ATO-UT-890A
$88.73
USB to RS485 converter at affordable price, 0.5m/ 1.5m/ 3m length can be chosen, asynchronous, point to point or point to multi-point, 2 wires half-duplex or 4 wires full-duplex working modes, USB-A male, DB9 male connector. Its advantage is that it supports hot swap, plug and play, and fast transmission speed.