Hydraulic Orbital Motor, 80cc/rev

$317.49
Low price hydraulic orbital motor can be mounted with 2 bolts or 4 bolts flange, used in agriculture machinery, fishing machinery, plastic industry, and construction machinery, etc. 80 cc/rev displacement, optional flat key shaft or splined shaft.
SKU: ATO-HOM-80
*
*
Free Shipping
Delivery date: 6-12 days

High torque low speed orbital hydraulic motor is widely applied in agriculture machinery, fishing machinery, plastic industry, mining, and construction machinery, especially fitted to lower load applications, such as plastic injection mold machines, cleaners, grass cutters, winches, conveyors, slews, sweeper drives, augers, cutters, mowers and chippers.

Specification

ModelATO-OMP-80
Shaft Type (Optional)Flat Key, Splined
Flange Type (Optional)2 Bolts, 4 Bolts
Displacement80 cc/rev (80 cm3/rev)
Working Pressure15 MPa
FlowContinuous57 LPM
Intermittent68 LPM
Max.SpeedContinuous679 rpm
Intermittent811 rpm
PressureContinuous124 ∆Bar
Intermittent138 ∆Bar
TorqueContinuous124 Nm
Intermittent139 Nm
Weight7kg

Note:

  • A simultaneous maximum torque and maximum speed are not recommended.
  • ∆Bar refers to true pressure difference between inlet port and outlet port.
  • Continuous Rating means that the motor may be run continuously at these ratings.
  • Intermittent operation refers to that the motor running time must not exceed 10% per minute under this condition.

*To assure the best orbital motor life, run it for approximately one hour at 30% of rated pressure before application to full load. Be sure this motor is filled with fluid before any load applications.

Dimensions (Unit: mm)

Dimensions of hydraulic orbital motor

L1=146mm

Hydraulic Orbital Motor Shaft (Unit: mm)

motor shafts of hydraulic orbital motor

Flange Types (Unit: mm)

2 bolt flange hydraulic orbital motor

4 bolt flange hydraulic orbital motor

L=152mm

Details

Hydraulic Orbital Motor Details

Tips: What is the relationship between orbital motor and hydraulic pump?

The orbital motor is a power unit and is used to provide torque. The hydraulic pump supplies oil and pressure to the hydraulic orbital motor. It is equivalent to the relationship between the battery and the motor.

Product reviews
Fast shipping, fit as expected.
5
Donald
Avatar
4/20/2022 2:59 AM
Works better than the original. This orbital hydraulic motor is fantastic with excellent power. Very quiet and high performance. I am very happy with this purchase and I would definitely buy from this site again.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

High torque low speed orbital hydraulic motor is widely applied in agriculture machinery, fishing machinery, plastic industry, mining, and construction machinery, especially fitted to lower load applications, such as plastic injection mold machines, cleaners, grass cutters, winches, conveyors, slews, sweeper drives, augers, cutters, mowers and chippers.

Specification

ModelATO-OMP-80
Shaft Type (Optional)Flat Key, Splined
Flange Type (Optional)2 Bolts, 4 Bolts
Displacement80 cc/rev (80 cm3/rev)
Working Pressure15 MPa
FlowContinuous57 LPM
Intermittent68 LPM
Max.SpeedContinuous679 rpm
Intermittent811 rpm
PressureContinuous124 ∆Bar
Intermittent138 ∆Bar
TorqueContinuous124 Nm
Intermittent139 Nm
Weight7kg

Note:

  • A simultaneous maximum torque and maximum speed are not recommended.
  • ∆Bar refers to true pressure difference between inlet port and outlet port.
  • Continuous Rating means that the motor may be run continuously at these ratings.
  • Intermittent operation refers to that the motor running time must not exceed 10% per minute under this condition.

*To assure the best orbital motor life, run it for approximately one hour at 30% of rated pressure before application to full load. Be sure this motor is filled with fluid before any load applications.

Dimensions (Unit: mm)

Dimensions of hydraulic orbital motor

L1=146mm

Hydraulic Orbital Motor Shaft (Unit: mm)

motor shafts of hydraulic orbital motor

Flange Types (Unit: mm)

2 bolt flange hydraulic orbital motor

4 bolt flange hydraulic orbital motor

L=152mm

Details

Hydraulic Orbital Motor Details

Tips: What is the relationship between orbital motor and hydraulic pump?

The orbital motor is a power unit and is used to provide torque. The hydraulic pump supplies oil and pressure to the hydraulic orbital motor. It is equivalent to the relationship between the battery and the motor.

Product reviews
Fast shipping, fit as expected.
5
Donald
Avatar
4/20/2022 2:59 AM
Works better than the original. This orbital hydraulic motor is fantastic with excellent power. Very quiet and high performance. I am very happy with this purchase and I would definitely buy from this site again.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews